Aidan's loose oily bunghole actually runs a track lap
#8365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Maybe. Depends on boost pressure.
Figure out your volume flow peak and keep your pressure drop reasonable. You figure your volume flow by estimating the mass flow from the hp goal and taking the estimated boost for the power and compressor outlet temp to convert that mass flow to volume flow.
Figure out your volume flow peak and keep your pressure drop reasonable. You figure your volume flow by estimating the mass flow from the hp goal and taking the estimated boost for the power and compressor outlet temp to convert that mass flow to volume flow.
#8368
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Bleh. Anyone know if there will be an actual difference between 2" and 2.25"? If i can do a 2" hotside i have exactly what I need in the garage. Maybe i'll do a 2" hotside, and if i ever decide to go for glory i'll toss in a 2.5" Its only 2 pieces of pipe.
#8374
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm sure the car will be. Who knows if I will though.
Optimistic first track day is end of march. But I really don't see that happening unless all the stars align.
I'm slowly checking things off the list though. And as soon as the racepak gets here I will start putting the interior back together again.
Optimistic first track day is end of march. But I really don't see that happening unless all the stars align.
I'm slowly checking things off the list though. And as soon as the racepak gets here I will start putting the interior back together again.
#8377
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (3)
Join Date: Apr 2014
Location: Huntington, Indiana
Posts: 2,885
Total Cats: 616
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Here is nifty little table that shows you how much airlfow you gain with an increase in diameter. It starts to be really significant at 2".
Numbers are SCFM.
![](https://cimg9.ibsrv.net/gimg/www.miataturbo.net-vbulletin/743x420/airflow_table_00145ede219f8e6469449afc0d6f3b06a0ffada0.png)
#8378
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
cool. here's my thread about it too from years ago
https://www.miataturbo.net/diy-turbo...iciency-69520/
https://www.miataturbo.net/diy-turbo...iciency-69520/
#8379
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
cool. here's my thread about it too from years ago
https://www.miataturbo.net/diy-turbo...iciency-69520/
https://www.miataturbo.net/diy-turbo...iciency-69520/