VVT + supermiata 36-2t trigger wheel + MS3 basic
#1
VVT + supermiata 36-2t trigger wheel + MS3 basic
Hi guys. I'm reading around when I'm about to do my timing belt on my rebuilt motor but I ran across some info and I wanted to confirm:
The supermiata 36-2t trigger wheel is compatible with the vvt motor right?
Also the trigger wheel position for TDC is correct in the picture below right? I read that I should count 9 tooth from the sensor for a 4 cylinder engine on MS3
Many thanks!
The supermiata 36-2t trigger wheel is compatible with the vvt motor right?
Also the trigger wheel position for TDC is correct in the picture below right? I read that I should count 9 tooth from the sensor for a 4 cylinder engine on MS3
Many thanks!
#2
Yes that trigger wheel will work fine with VVT. In the drop down menu for trigger wheel there is an option for it. I do not know if you have the wheel on correctly or not, but if you use all the small screws to bolt the wheel to the damper, it should be on correctly. I do believe you can only put it on one way.
#3
Yes that trigger wheel will work fine with VVT. In the drop down menu for trigger wheel there is an option for it. I do not know if you have the wheel on correctly or not, but if you use all the small screws to bolt the wheel to the damper, it should be on correctly. I do believe you can only put it on one way.
Good to know! thanks