Hello from Reno NV
#1
Hello from Reno NV
My names David have a few friends in town that said to check out the site about my turbo needs I have a 97 NA that other than brakes, roll bar, and a few other odds and ends its bone stock original owner took really good care of it and I just made it a little better, also have a 88 TII Rx7 that's been a 5 year money pit
Day i bought it
most important thing when you drive a beer can
Day i bought it
most important thing when you drive a beer can
#3
Doing what any normal person does with a miata use it for scca autocross or track days already have cobra seats just waiting on my harnesses haven't picked out what suspension I want and really need a hardtop , and eventually next year I will turbo it but for now I'll enjoy it in its almost stock form .
#6
Without knowing anything detailed about the Ohlins or Xidas other than previous experience with the brand, I might decide the same way. The owners on this forum however, have extensive experience with virtually every shock or coilover setup ever offered for the NA/NB. You came to the right forum to search for tech info for the platform.
__________________
#7
Without knowing anything detailed about the Ohlins or Xidas other than previous experience with the brand, I might decide the same way. The owners on this forum however, have extensive experience with virtually every shock or coilover setup ever offered for the NA/NB. You came to the right forum to search for tech info for the platform.
#8
Nice looking car! Looks pretty clean. Whatever route you end up going for suspension, I strongly recommend converting your car to NB top hats. They are way better than the NA ones. You can do if for really cheap too: all new rubber will cost about $50 for all four corners, which makes sourcing used top hats worthwhile.
#9
Nice looking car! Looks pretty clean. Whatever route you end up going for suspension, I strongly recommend converting your car to NB top hats. They are way better than the NA ones. You can do if for really cheap too: all new rubber will cost about $50 for all four corners, which makes sourcing used top hats worthwhile.
I'll be ordering at the end of the year will also being doing bearings and bushing on everything since I'll have it apart
#11
figured since we did them on the rx7 for adjustability so I figured it would be fine to go with on the Miata, honestly don't know a whole lot about suspensions or the adjustments I had a friend help me setup the rx7 and I've hired people to do previous cars, what I really know is engines, trans, rear ends and electrical and don't know **** about body work lol
#14
Coaxial Billet Mount function
Unrelated. A damper is basically two cylinders, one sliding inside the other. Add friction or drag and the damper doesn't work as well. Fixed mounts cause spring deflection in various modes. Coil springs do not compress in perfect symmetry. They twist, bend and distort during their stroke. A coaxial perch mount with spherical bearing on top and torrington thrust bearings below goes a long way towards isolating the damper from those spurious loads. You'll notice virtually all billet upper shock mounts available in the aftermarket do not have the key ingredient, the coaxial or "floating" secondary perch for the spring. This allows the body mount to sit off axis with the main spring without imparting any off axis loads into the damper that might increase friction. Additionally, the coaxial perch allows the spring to produce a more linear rate throughout its stroke. This feature is missing from most billet mounts simply because the companies making them either don't understand how the shock really works or are so focused on reducing cost and selling price that they just "leave that bit out".
__________________
#15
Unrelated. A damper is basically two cylinders, one sliding inside the other. Add friction or drag and the damper doesn't work as well. Fixed mounts cause spring deflection in various modes. Coil springs do not compress in perfect symmetry. They twist, bend and distort during their stroke. A coaxial perch mount with spherical bearing on top and torrington thrust bearings below goes a long way towards isolating the damper from those spurious loads. You'll notice virtually all billet upper shock mounts available in the aftermarket do not have the key ingredient, the coaxial or "floating" secondary perch for the spring. This allows the body mount to sit off axis with the main spring without imparting any off axis loads into the damper that might increase friction. Additionally, the coaxial perch allows the spring to produce a more linear rate throughout its stroke. This feature is missing from most billet mounts simply because the companies making them either don't understand how the shock really works or are so focused on reducing cost and selling price that they just "leave that bit out".
#17
*takes notes on Emilios posts*
Also, for bushings and info, see here. https://www.miataturbo.net/suspensio...cussion-87573/
Also, for bushings and info, see here. https://www.miataturbo.net/suspensio...cussion-87573/
#18
*takes notes on Emilios posts*
Also, for bushings and info, see here. https://www.miataturbo.net/suspensio...cussion-87573/
Also, for bushings and info, see here. https://www.miataturbo.net/suspensio...cussion-87573/