MKTurbo Sale Thread
#1347
About 6k miles since I finished install and got tuned everything's working great so far other than the slight oil leak on the turbo feed which isn't a bug issue and also recently the extra hanger broke off causing a hole in the pipe it was welded to. I don't think it was the weld since it ripped a small portion of the pipe off causing a leak. Most likely it's the shitty roads in MA and my semi collapsed rear springs banging the exhaust. Other than that no complaints about the kit I would highly recommend this to anyone on a budget
#1348
mkturbo.com
Thread Starter
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
About 6k miles since I finished install and got tuned everything's working great so far other than the slight oil leak on the turbo feed which isn't a bug issue and also recently the extra hanger broke off causing a hole in the pipe it was welded to. I don't think it was the weld since it ripped a small portion of the pipe off causing a leak. Most likely it's the shitty roads in MA and my semi collapsed rear springs banging the exhaust. Other than that no complaints about the kit I would highly recommend this to anyone on a budget
#1350
mkturbo.com
Thread Starter
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
I am about to get started on a batch of 1.8 NA setups. I have roughly enough supplies for 2 more on top of what I was planning on doing. So if anyone with a 1.8 NA wants in shoot me an email at mkturbos@gmail.com. The first 2 people who contact me get in.
#1351
I am about to get started on a batch of 1.8 NA setups. I have roughly enough supplies for 2 more on top of what I was planning on doing. So if anyone with a 1.8 NA wants in shoot me an email at mkturbos@gmail.com. The first 2 people who contact me get in.
Shot you a PM
#1358
mkturbo.com
Thread Starter
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
Between celebrating stealing this nation from the natives, hanging out with family, and fighting a damn cold I managed to get a bit more done on setups over the weekend. I have more axle backs being prepped, they just are not in this picture.
#1360
To the folks that have tracked their cars: Have you found anything you have had to upgrade or modify for reliability?
I am planning on getting some TSE Inconel studs for the turbo but cannot think of anything else I need to grab (other than clutch, injectors, MS from Braineack, Intercooler, etc).
Thanks in advance for any suggestions.
I am planning on getting some TSE Inconel studs for the turbo but cannot think of anything else I need to grab (other than clutch, injectors, MS from Braineack, Intercooler, etc).
Thanks in advance for any suggestions.