Parting out an '02
#21
Maybe 1-2 inch if possible
#22
Junior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2013
Location: Richmond VA
Posts: 142
Total Cats: 11
I can do that
Carpet, glove box, cluster, gauge hood, switches, and a bunch of other random stuff sold locally.
Dented hood is free if someone wants to come pick it up, otherwise it's probably going to scrap this weekend.
Does anyone have a need for the tub? It wouldn't go as a roller since I want to move the whole rear subframe over to my car...stripped down tub is free if someone can pick it up (literally?) I can give you the title and the dash that has the VIN on it...maybe good for a spare tub for a Spec car, or some other build. Otherwise, I'll get tired of looking at it and chop it up.
Carpet, glove box, cluster, gauge hood, switches, and a bunch of other random stuff sold locally.
Dented hood is free if someone wants to come pick it up, otherwise it's probably going to scrap this weekend.
Does anyone have a need for the tub? It wouldn't go as a roller since I want to move the whole rear subframe over to my car...stripped down tub is free if someone can pick it up (literally?) I can give you the title and the dash that has the VIN on it...maybe good for a spare tub for a Spec car, or some other build. Otherwise, I'll get tired of looking at it and chop it up.
#24
Still have the power antenna? Willing to ship to 19044?
#25
Do you have the front right and left fender liners? I need the louvered ones that go in front of each wheel. Mine are shredded. 97231
#26
Junior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2013
Location: Richmond VA
Posts: 142
Total Cats: 11
I do still have that, it's an ABS car though, I'm not sure if they're quite as desirable. It might be a couple weeks before I strip the shell down though.
Yes, $40 shipped?
I don't have these, unfortunately.
Yes, $40 shipped?
I don't have these, unfortunately.
#28
#29
Junior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2013
Location: Richmond VA
Posts: 142
Total Cats: 11
Bump. Not really a lot of parts left that people actually want....but if you need the random little parts, wiring pigtails (ex. headlights if you're converting a 99-00), brackets, hardware, etc. let me know. I haven't stripped down the whole shell yet, but it's getting to the point where that's the only thing left to do.
#32
Looking for pigtail / connector for the rear defroster.
thanks!
thanks!
#35
Junior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2013
Location: Richmond VA
Posts: 142
Total Cats: 11
Power antenna, battery hold down, and battery tray sold!
I still have a passenger door with glass and regulator...$50 if anyone wants the whole thing.
This car also has the Sport OEM butterfly brace of sorts if someone is looking for that.
I still have a passenger door with glass and regulator...$50 if anyone wants the whole thing.
This car also has the Sport OEM butterfly brace of sorts if someone is looking for that.
#36
#38
#39
Junior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2013
Location: Richmond VA
Posts: 142
Total Cats: 11
Defrost wiring sold.
I have all of the NB2 underbody braces that are factory, and the strut tower brace...$150 for the complete set.
Mu cracked but oem radiator $20
Full AC system $100 (lines, compressor, evaporator, condenser) still installed and charged at the moment
Lots of small things, body side wiring, trunk carpet, jack, steering column, pedals, stock exhaust, etc.
I have all of the NB2 underbody braces that are factory, and the strut tower brace...$150 for the complete set.
Mu cracked but oem radiator $20
Full AC system $100 (lines, compressor, evaporator, condenser) still installed and charged at the moment
Lots of small things, body side wiring, trunk carpet, jack, steering column, pedals, stock exhaust, etc.
#40
Do you still have the tub is so I would be very interested and I live right in Maryland I could pick it up