Aidan's loose oily bunghole actually runs a track lap
#7347
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
I love when you prove my points for me
ive always been impressed with mitutoyo
Mitutoyo Digimatic Bore Micrometer 468 988 IP65 Holtest 1 2 " 25 4 50 8mm | eBay
ive always been impressed with mitutoyo
Mitutoyo Digimatic Bore Micrometer 468 988 IP65 Holtest 1 2 " 25 4 50 8mm | eBay
#7355
They will distort if you torque them to a value that results in a higher clamping force than the stock bolts torqued to stock spec. If you want to run them, just have the machine shop do a line bore/line hone and be done. 200 is a fair price, I paid either 200 or 250 for the same on mine.
#7356
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I'm sure we could get any number of people here on either side for the main line bore. And although I have increased the budget for this build, there still is one, and i need to cut corners somewhere.
#7359
I don't have the specs in front of me either. I would imagine they are stronger than the stock bolts, and thus will require a higher torque. Also ARP typically uses a low friction lubricant, and fine pitch threads to increase clamping force. That's 3 things that all result in higher clamping force.