Hello from Hawaii
#1
Hello from Hawaii
Hey guys,
I've always been a car guy but new to the miata scene. I just picked up a black 92 all stock with 79k miles on it. A family friend (old guy, 1st owner) gave it to me for a couple hundred bucks The car has been babied and I'm excited to see where this goes. The car will not be a daily driver, maybe taken out once a week for spirited road driving, maybe one day I'll decide to track, but not in the near future. Goals for the build are a reliable 250whp. I think it would be cool to keep the 1.6 since it only has 79k miles (good compression) I know.. I know.. a lot of you guys hate this 1.6 thing and I'm new to miata's so enlighten me, however I hope achieving that goal is still possible. I have decent mechanic skills so I'm up to the challenge and I've read a bit on the forums, so I figured torsen diff, rods, pistons etc. will be needed to meet the goal and I'm up to it. As well as susp, brakes etc.. anyway I'm not looking for a shortcut and prefer to do things the best way the first time lol. Just looking for some good help from a good community. Whats the feasability of meeting a 250whp (maybe a little more?? ) goal with this 1.6 thing? Thanks for hearing me out!
I've always been a car guy but new to the miata scene. I just picked up a black 92 all stock with 79k miles on it. A family friend (old guy, 1st owner) gave it to me for a couple hundred bucks The car has been babied and I'm excited to see where this goes. The car will not be a daily driver, maybe taken out once a week for spirited road driving, maybe one day I'll decide to track, but not in the near future. Goals for the build are a reliable 250whp. I think it would be cool to keep the 1.6 since it only has 79k miles (good compression) I know.. I know.. a lot of you guys hate this 1.6 thing and I'm new to miata's so enlighten me, however I hope achieving that goal is still possible. I have decent mechanic skills so I'm up to the challenge and I've read a bit on the forums, so I figured torsen diff, rods, pistons etc. will be needed to meet the goal and I'm up to it. As well as susp, brakes etc.. anyway I'm not looking for a shortcut and prefer to do things the best way the first time lol. Just looking for some good help from a good community. Whats the feasability of meeting a 250whp (maybe a little more?? ) goal with this 1.6 thing? Thanks for hearing me out!
#3
Take a look at my build thread. (astrals haltech build)
I am, as you say, "doing things the best way the first time" to the best of my knowledge and ability.
Honestly, in my knowledge, if you are going to go rods and pistons then you really ought to spend that money on a 1.8 engine, otherwise you will just be missing out on spool.
At 79k miles, if the compression and leak down are solid then why not boost the 1.6. You will definitely need the torsen at 250whp. Keep in mind I would consider 250whp pushing the 1.6. Not that it can't do it, but I imagine you will be shortening the engines life.
Grab some 1.8 brakes and proper pads. Blank rotors are just fine, the stock brakes are good enough at those levels (though if you want to throw money at brakes, that is never a bad idea).
If I was you, I would budget towards buying a great engine management system, good injectors, and you will need a clutch. You'll also need good tires, and at least a decent suspension (obviously this is dependent on how well you want your car to handle. To me this is paramount, so lots of dollars spent there.)
As you can see, while it can be done on the cheap, properly building up your car with lots of supporting modifications and a well sorted turbo kit isn't cheap, but will be well worth it!
By the way, have you driven a 250whp Miata? You may be happy sticking to 200-220whp on your 1.6 and may enjoy that just as much. These cars get damn quick with boost.
I am, as you say, "doing things the best way the first time" to the best of my knowledge and ability.
Honestly, in my knowledge, if you are going to go rods and pistons then you really ought to spend that money on a 1.8 engine, otherwise you will just be missing out on spool.
At 79k miles, if the compression and leak down are solid then why not boost the 1.6. You will definitely need the torsen at 250whp. Keep in mind I would consider 250whp pushing the 1.6. Not that it can't do it, but I imagine you will be shortening the engines life.
Grab some 1.8 brakes and proper pads. Blank rotors are just fine, the stock brakes are good enough at those levels (though if you want to throw money at brakes, that is never a bad idea).
If I was you, I would budget towards buying a great engine management system, good injectors, and you will need a clutch. You'll also need good tires, and at least a decent suspension (obviously this is dependent on how well you want your car to handle. To me this is paramount, so lots of dollars spent there.)
As you can see, while it can be done on the cheap, properly building up your car with lots of supporting modifications and a well sorted turbo kit isn't cheap, but will be well worth it!
By the way, have you driven a 250whp Miata? You may be happy sticking to 200-220whp on your 1.6 and may enjoy that just as much. These cars get damn quick with boost.
#9
I mean you could likely do 250whp with a stock 1.6, though I would probably limit myself just under to be a bit more safe. That being said, if you wanted more usable power I wouldn't waste money pulling the 1.6 to build it then put it back in, I would rather just build the 1.8 and build that.
#11
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 21,067
Total Cats: 3,132
I used to live in Mililani, too! Hokuala Street, and went to Mililani Uka school.
My brother is over there now somewhere on Oahu and he just bought a Miata. Pic attached.
Welcome to the forum.
My brother is over there now somewhere on Oahu and he just bought a Miata. Pic attached.
Welcome to the forum.
#17
aloha. I grew up in Mililani most of my life. You said you might track it... I think they only have some auto crosses on Oahu right?
as you've probably have read, if you are going to upgrade you are better off building and swapping a 1.8 in rather than throwing money away with the 1.6.
as you've probably have read, if you are going to upgrade you are better off building and swapping a 1.8 in rather than throwing money away with the 1.6.
Thread
Thread Starter
Forum
Replies
Last Post
Boosted Bitty
General Miata Chat
2
07-20-2016 11:30 AM