When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Alright, before any of you say "Just research it", I've looked all over the internet trying to find the right pin out for this damn connector.
When I ask this question, IGNORE COLORS. I do not have the exact pigtail that came with the VTPS, I have one that fits, but has different colored wires.
The pin out for the non-variable TPS is as follows:
Now, can anyone show the corresponding information but on the A/T VTPS?
the wiring diagram section shows the pinout and wire colors.
1N (R) is on/off idle switch
B/LG is Ground
LG/R is 5V
2M (R/B) is vTPS signal
This is perfect, thanks guys. I had a schematics from the haynes manual but it was wrong when it came to the wire colors on the TPS for the 1.6, so I couldnt trust it.
Originally Posted by deezums
The wire labeled idle switch in that picture is unused.
What do colors matter, didn't you say so yourself? There's plenty in that picture to get you going.
And yes the colors didnt matter if someone was just telling me the pin out, but with the picture I could do some simple translating and understand which colors they were talking about. Anyway, Thanks again.