SADFab Bushing Options and Price Drop!
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![](https://www.miataturbo.net/attachments/general-miata-chat-9/161036-sadfab-into-thread-jji0oi7.jpg?dateline=1454372148)
If you haven't read the Bushing Megathread, go do that first. Then come back and talk to us.
This thread will cover all of the different bushing options that SADFab offers, along with pricing for the more common ones. In general we can set you up with whatever you want, but I will list the most common packages and pricing. You will also be able to see this information at www.SADFab.com in the coming weeks. All prices include shipping To order email us at info@sadfab.com
Prices can also be seen at the link on our website: www.sadfab.com#bushingprices
Polyurethane Bushing Bronze Bearing Conversion Kit
So far this is our favorite option. It is perfect for people who want better performance out of their already installed poly bushings, but don't want to go all out and run delrin everywhere. This kit will replace all the metal sleeves that come with your poly kit with higher strength sleeves and . SAE863 bearings.
It contains the following:
- Bronze bearings and sleeves for all bushing locations on the car
Note: The FUCA bushings must be drilled out, at some point we may offer an exchange program but as of now you must ship your FUCA bushings to us to have them drilled out. He will then ship them back to you with the whole retrofit kit.
PRICE DROP: We have been hard at working making this popular option as affordable as possible. And we are proud to announce that we have found a way to make this significantly cheaper than before. Our price goal is ~$200 and will be available in the coming weeks.
Price: ~$200
11/19/16 update: Install tips video
Basic Delrin Kit
This is a bare bones delrin kit. Nothing fancy, you just want moar stiff.
It contains the following:
- Delrin Bushings for the following locations:
- FLCA Forward Bushing
- FUCA-I bushings
- RLCA-I Forward Bushing
- RLCA-O bushings
- RUCA-I bushings
- Grease fittings for all locations
Price: $420
*If upgrading from poly bushings you can reuse your bushings in these locations, but SADFab recommends trying to sell your poly kit all together. You will end up better off that way. Price does not include the poly bushings
The Full Package
This is the kit that Sean and I run. It is delrin everywhere that works, with poly and bronze bearings in the spots you can't and a spherical in the RUCA-O location.
It contains the following:
- Delrin Bushings for the following locations:
- FLCA Forward Bushing
- FUCA-I bushings
- RLCA-I Forward Bushing
- RLCA-O bushings
- RUCA-I bushings
- Poly bushings and bronze bearings for the following locations (see Bushing Megathread for details)*:
- FLCA Aft bushing
- RLCA Aft bushing
- RUCA-O spherical conversion kit
- Grease fittings for all locations
*If upgrading from poly bushings you can reuse your bushings in these locations, but SADFab recommends trying to sell your poly kit all together. You will end up better off that way. Price includes the poly bushings
Price: $610
The NASA Full Package
This is the same as the Full Package, but uses a poly bushing and bronze bearing in the RUCA-O because of the NASA small bore rules about metal bearings.
It contains the following:
- Delrin Bushings for the following locations:
- FLCA Forward Bushing
- FUCA-I bushings
- RLCA-I Forward Bushing
- RLCA-O bushings
- RUCA-I bushings
- Poly bushings and bronze bearings for the following locations (see Bushing Megathread for details)*:
- FLCA Aft bushing
- RLCA Aft bushing
- RUCA-O bushing
- Grease fittings for all locations
*If upgrading from poly bushings you can reuse your bushings in these locations, but SADFab recommends trying to sell your poly kit all together. You will end up better off that way. Price includes the poly bushings
Price: $570
The "Because Racecar"
This is the all out, nothing wasted, perfect bushing setup. Sphericals everywhere they are needed, and delrin everywhere else. This is still in development, so pricing will be announced later, but if you are interested in it contact us.
It contains the following:
- Delrin Bushings for the following locations:
- FUCA-I bushings
- RLCA-O bushings
- RUCA-I bushings
- Spherical conversion sleeves in the following locations:
- FLCA
- RLCA-I
- RUCA-O
- Grease fittings for all locations
Price: TBA
Offset Lower Control Arm Bushing
A common solution to gaining more camber in the front of a Miata is to install an offset upper bushing. While this does increase camber, it also decreases bump travel when using wider than 8" wheels. We using a delrin offset bushing in the forward lower control arm position combined with a poly bushing in the aft lower control arm position. This is a good alternative to ELBJ and is a “no-point” mod for NASA
Until now the only way to get a bushing like this was to have it custom made. Not anymore, SADFab is offering offset forward lower control arm bushings to get all the camber you want.
Price: $60
Note: All delrin bushings require drilling out with a 7/8" drill after pressing into control arms.
11/19/16 Update: How to ream your delrin bushings video.
Notes:
-All prices include shipping, and most of our packages can be adjusted to fit your needs just shoot us an email at info@sadfab.com and we will make something work.
Last edited by SADFab; 11-19-2016 at 12:01 PM.
#7
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ok so I have read "the thread" but my limited suspension IQ is not quite getting it. I have a set of ES Poly waiting to be installed on my 99. I am currently using it as a second DD and weekend toy car. No plans of AutoX or tracking yet. I have upgraded the suspension to AFCO coilovers, FM rails and Butterfly brace and BF double hoop roll bar. The bushing is the next in line to be tackled but then this caught my attention.........
So this "copper" bearings will help the silicone grease stay better than the supplied bushings? How about just using the "copper anti-seize compound" instead of the supplied silicone grease?
What is the recommended interval of reapplying the grease with this copper bearings?
I am contemplating of just using the FM/MS upgraded rubber bushings instead but if this makes the Poly's perform better then this a cheaper option for me as I already have them.
Thanks.
So this "copper" bearings will help the silicone grease stay better than the supplied bushings? How about just using the "copper anti-seize compound" instead of the supplied silicone grease?
What is the recommended interval of reapplying the grease with this copper bearings?
I am contemplating of just using the FM/MS upgraded rubber bushings instead but if this makes the Poly's perform better then this a cheaper option for me as I already have them.
Thanks.
#8
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What the bronze does is effectively replace the grease. (We still recommend grease to keep contaminates out). The bronze bearing goes around a replacement sleeve and is oil impregnated. Because the poly is so sticky the bronze bearing sticks to it, but can rotate freely around the bushing.
Here is an awesome drawing I made.
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/175884-sadfab-bushing-options-price-drop-80-9ppnml0_852c09ebff25a47d0df6749fe1aeb3fd295c8bc6.png?dateline=1467480657)
The bronze bearing allows the sleeve to freely rotate inside the poly bushing. And can't be displaced the way that grease can.
Here is an awesome drawing I made.
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/175884-sadfab-bushing-options-price-drop-80-9ppnml0_852c09ebff25a47d0df6749fe1aeb3fd295c8bc6.png?dateline=1467480657)
The bronze bearing allows the sleeve to freely rotate inside the poly bushing. And can't be displaced the way that grease can.
#9
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,976
Total Cats: 1,021
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
^indeed. This is a HUGE improvement to the function of the bushings. I used the copper anti seize stuff and I haven't had a good experience with it. My bushings stick bigtime.
Will be doing bronze inserts or full delrin over the winter.
Will be doing bronze inserts or full delrin over the winter.
#10
SadFab CEO
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So this "copper" bearings will help the silicone grease stay better than the supplied bushings? How about just using the "copper anti-seize compound" instead of the supplied silicone grease?
What is the recommended interval of reapplying the grease with this copper bearings?
@bbundy can tell you more about using anti-seize compound. That just gets pushed out to, and is only slightly better than the silicone stuff, as after multiple applications some of the copper flecks remain.
The poly retro kit includes grease zerks for every location. I dont see the need to grease them more than once a year.
#16
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
There are not bearings included in the normal kit. Just a sleeze and a bushing. We create a stronger center sleeve and provide you with bronze bearings to go between the sleeve and the bushing.
See the picture.
See the picture.