Help with my VVT tune please!
#23
Quick, and probably useless, log file attached. It's me cycling test mode from 0% to 100%.
I did figure out that my VTT1 Angle gauge is determined by whatever I set Minimum angle to. It was stuck a 5.5 with Min set to 5.5, changed min to 250 and max to 300 to test and VTT1 Angle changed to 250.
I did figure out that my VTT1 Angle gauge is determined by whatever I set Minimum angle to. It was stuck a 5.5 with Min set to 5.5, changed min to 250 and max to 300 to test and VTT1 Angle changed to 250.
Thread
Thread Starter
Forum
Replies
Last Post