wtb resbond and fire sleeve
#1
wtb resbond and fire sleeve
I'm going to pull the turbo on my car to do the inconel studs and a bunch of other things. I would like to heat sleeve the coolant lines. I have a FM heat shield to go on but I'm not even sure that it covers the area around the coolant lines.
so what size sleeve should I buy for the coolant lines behind the turbo? also thinking about doing something for the turbo oil line, not sure what I have yet, perhaps I should make a stainless an line if i have rubber.
the car came with a FM turbo kit but it is at least 5 years old.
does anyone sell a small bottle of the resbond thread lock, would rather not buy a big bottle if I only need a few drops.
so what size sleeve should I buy for the coolant lines behind the turbo? also thinking about doing something for the turbo oil line, not sure what I have yet, perhaps I should make a stainless an line if i have rubber.
the car came with a FM turbo kit but it is at least 5 years old.
does anyone sell a small bottle of the resbond thread lock, would rather not buy a big bottle if I only need a few drops.
#7
Mcmaster-carr sells some high temp threadlocker. It doesn't say Resbond, but it does say it's good to 2100F.
http://www.mcmaster.com/#threadlockers/=godkza
Click on "extreme temperature"
I just ordered some to go with a FM inconel kit, so not sure how either will perform yet.
http://www.mcmaster.com/#threadlockers/=godkza
Click on "extreme temperature"
I just ordered some to go with a FM inconel kit, so not sure how either will perform yet.