What Does Your Perfect Home Shop Look Like?
#41
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,683
Total Cats: 805
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
We bought the garage light ones. I meant to post a link. Garage Lights and Shop Lights | Big *** Light These are supposed to be for homeowners? Like some average guy is going to spend over 2 grand for garage lights? Right.
But we did get some cool mugs out of the deal, and I didn't have to pay for any of it.
But we did get some cool mugs out of the deal, and I didn't have to pay for any of it.
But for a garage light, that's way to much, even for 13000 lumens.
8' florescent lights work great, have cheap initial cost, and low operating cost.
Not to mention, you can replace individual pieces of it. LED light dies, you may as well replace the entire unit.
#47
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So, clean, slick floor is better than a floor you can't clean/ can't kneel on/ can't find a dropped bolt on.
What do you guys think about these for lighting? Maybe two in place of a 2 bulb 8ft fluorescent fixture? So 8 or 10 for the main shop and two more in the storage room?
4-Inch Hyperikon® LED Downlight, ENERGY STAR, 9W (65W Equivalent), 3000K (Soft White Glow), CRI93+, Dimmable, Retrofit LED Recessed Lighting Kit Fixture, Wet Rated and UL-Listed - (Pack of 4) - - Amazon.com
What about the floor sink idea? The more I think about it the more superfluous it seems. Also, I don't know if I'll be on city sewer or a septic tank, and putting a bunch of grease into a septic tank sounds like a bad idea. I can always pressure wash stuff out in the yard.
How much power do I need? I'm clueless on this. I have an appointment with a home inspector tomorrow, so I'll see what he thinks about the current box situation then.
Also, what about air lines? The 3/4" PVC in my current shop has been through 10 years of heat/ load cycles, and extended periods where the regulator was set to 150psi and nobody caught it. It really doesn't give me a warm-fuzzy on impact strength or fatigue resistance, though.
What do you guys think about these for lighting? Maybe two in place of a 2 bulb 8ft fluorescent fixture? So 8 or 10 for the main shop and two more in the storage room?
4-Inch Hyperikon® LED Downlight, ENERGY STAR, 9W (65W Equivalent), 3000K (Soft White Glow), CRI93+, Dimmable, Retrofit LED Recessed Lighting Kit Fixture, Wet Rated and UL-Listed - (Pack of 4) - - Amazon.com
What about the floor sink idea? The more I think about it the more superfluous it seems. Also, I don't know if I'll be on city sewer or a septic tank, and putting a bunch of grease into a septic tank sounds like a bad idea. I can always pressure wash stuff out in the yard.
How much power do I need? I'm clueless on this. I have an appointment with a home inspector tomorrow, so I'll see what he thinks about the current box situation then.
Also, what about air lines? The 3/4" PVC in my current shop has been through 10 years of heat/ load cycles, and extended periods where the regulator was set to 150psi and nobody caught it. It really doesn't give me a warm-fuzzy on impact strength or fatigue resistance, though.
#48
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Home Depot sells four-packs of 60w equiv dimmables for $20. Non-dimmables are $3 ea. I have replaced every single lamp* in my apartment with these, and they rock. I can see no reason why I will ever buy another CFL or incandescent light for a household application. And with the amount and pattern of light these throw off, I'd have no qualms about putting them all over the ceiling of my workshop. For $4.47 a pop ($3 for the LED, $1.47 for the cheapest porcelain lamp holder money can buy), you could cover the ceiling of a 500 ft^2 shop at 60 watts / meter (halogen equivalent) for half the price of a single Big *** "The" garage light. And you'd have totally even lighting with no shadows.
* = except for the strip light in the kitchen, and the bulb in the oven.
#49
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
re: RapidAir - that's what I went with after considering just how easy it is compared to putting together a system from pipe and fittings. I built a hard line setup off the compressor using copper with a vertical drop to collect water and valve to dump it. Then a filter/water trap and on to the rapid air hose/fittings. Has worked perfectly for years.
#50
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,683
Total Cats: 805
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This is the stuff I've been buying at work here.
Ipex inc / Products / Duratec Airline
Essentially the same thing, except I like the fittings better. I buy through a supplier so it ends up a little cheaper.
Ipex inc / Products / Duratec Airline
Essentially the same thing, except I like the fittings better. I buy through a supplier so it ends up a little cheaper.
#52
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am really picky about lighting quality- I was a photo student in college and am really sensitive to color reproduction after having spent hours turning ***** on color enlargers. My shop is lit by a total of 22 philips TL 950 lamps with decent ballasts placed into the cheapest HD fixtures. Elsewhere in my house I am using Yuji LEDs and if I and up doing more lighting in my garage it will probably be the yuji leds.
![](https://www.miataturbo.net/attachments/race-prep-75/154850-what-does-your-perfect-home-shop-look-like-80-lp163xt_354fc67bba7a595f0a87ab34201a8ee59804c8f7.jpg?dateline=1447437889)
Last edited by asmasm; 11-18-2015 at 04:04 PM.
#54
Senior Member
iTrader: (2)
Join Date: Sep 2009
Location: Edmonton, AB, Canada
Posts: 1,193
Total Cats: 29
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have the Lisle socket organizers and love them. Lots of sizes available. Sockets lay flat, magnet to holt them in the tray, and easy to sharpie the sizes beside if you would like.
Amazon.com: Lisle 40200 Red 3/8" Magnetic Socket Holder: Automotive
Amazon.com: Lisle 40200 Red 3/8" Magnetic Socket Holder: Automotive
Now to find a china version......
As for lighting I would go LED, but, but I'd like to see the price drop a bit more. Still a high $/lumen ratio. The fact that they last a long long time probably outweighs that but initial cost is still high.
#58
Elite Member
iTrader: (21)
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,623
Total Cats: 1,277
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Not sure where they were from, but I had a set of magnetic trays years ago. I doubt they were harbor freight, as I don't believe it existed back then. The one for small (1/4" drive) sockets was great. The one for 3/8" was okay, but tended to drop some out if you weren't careful. The ones for 1/2" sucked, and was no better than a flat tray, as the magnets weren't strong enough. None of them would hold a deep well socket worth a damn.
I gave them to a friend, and he ended up taping them to the bottom of the drawer to hold them in place. No idea if he still has them or not.
I gave them to a friend, and he ended up taping them to the bottom of the drawer to hold them in place. No idea if he still has them or not.
#59
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
"Perfect", no
"Home Shop", no, its 8 miles away at a friends apartment complex.
![](https://www.miataturbo.net/attachments/race-prep-75/154943-what-does-your-perfect-home-shop-look-like-80-gott_om_plats_r_det_ont_om_13b41cede34295e44d3bcde23cc1aebf5d1f4f47.jpg?dateline=1447515390)
It's two car spaces where one is used for crap, and the other for the car and some more crap (including the leftovers of a tub).
It would be nicer to have twice the space, at home, heated, ...
But for my lazy wrenching it's been good enough for the last ten years.
Good general lighting combined with some builders lights as floorlights.
Roof placed outlets and a reel reduces the number of times you trip over cords (or pinch then with a jack).
"Home Shop", no, its 8 miles away at a friends apartment complex.
![](https://www.miataturbo.net/attachments/race-prep-75/154943-what-does-your-perfect-home-shop-look-like-80-gott_om_plats_r_det_ont_om_13b41cede34295e44d3bcde23cc1aebf5d1f4f47.jpg?dateline=1447515390)
It's two car spaces where one is used for crap, and the other for the car and some more crap (including the leftovers of a tub).
It would be nicer to have twice the space, at home, heated, ...
But for my lazy wrenching it's been good enough for the last ten years.
Good general lighting combined with some builders lights as floorlights.
Roof placed outlets and a reel reduces the number of times you trip over cords (or pinch then with a jack).