wednesday night fun drag results...
#1
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 568
Total Cats: 162
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
they told me i couldnt run through the water anymore to get a good 2nd gear burn out so traction was a bit worse than 2 weeks ago...but on the plus side im finally learning how to control my car enough for consistency. thank you guys for your help with my MS.
60 foot | 1/8 time and mph| 1/4 time and mph
2.179.. | 8.415@91.290... | 12.711@110.900
2.200.. | 8.450@91.835... | 12.735@111.556
2.173.. | 8.461@91.776... | 12.745@110.535
2.158.. | 8.451@91.267... | 12.753@111.507
2.151.. | 8.454@91.480... | 12.758@111.539
2.178.. | 8.470@90.936... | 12.759@110.466
2.179.. | 8.505@91.165... | 12.802@110.280
2.220.. | 8.517@91.627... | 12.802@109.761
2.237.. | 8.548@91.484... | 12.830@110.939
2.240.. | 8.597@91.161... | 12.886@110.640
2.209.. | 8.996@88.764... | 13.363@110.548- missed 2nd gear
60 foot | 1/8 time and mph| 1/4 time and mph
2.179.. | 8.415@91.290... | 12.711@110.900
2.200.. | 8.450@91.835... | 12.735@111.556
2.173.. | 8.461@91.776... | 12.745@110.535
2.158.. | 8.451@91.267... | 12.753@111.507
2.151.. | 8.454@91.480... | 12.758@111.539
2.178.. | 8.470@90.936... | 12.759@110.466
2.179.. | 8.505@91.165... | 12.802@110.280
2.220.. | 8.517@91.627... | 12.802@109.761
2.237.. | 8.548@91.484... | 12.830@110.939
2.240.. | 8.597@91.161... | 12.886@110.640
2.209.. | 8.996@88.764... | 13.363@110.548- missed 2nd gear
#3
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 568
Total Cats: 162
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
yea... i need to start seam stitching my front end asap... the cracks on the stut towers to the firewall are getting bigger and its only a matter of time til i launch the front end off my car...
#8
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 568
Total Cats: 162
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
should be close to 300whpish. i forgot my laptop so i dont have data logs to go with the slips. last log of my 12.9's i was only around 40% throtlle in 1st, 50-60% in 2nd, and 3rd didnt get wot til around 5800-6000 rpm... damn street tires.
quick run down on my set up
95 EGT BP stock flywheel
95 EGT trans converted to cable clutch
mercury capri XR2 axles and intermediate shaft
Aint No Bitch Motorsports custom front motor mount and cross member
Aint No Bitch Motorsports intermediate shaft bracket
spec stage 3+ clutch
evo3 big 16G
ebay 3" in 3" out FMIC and pipe
2.5" full custom turbo back exhaust
38mm tial open dump wastegate
1000cc fiveO injectors
MS1v3.0 set up to run like a miata with a NA CAS
14x6.5 toora wheels doral sdl 60 185/60/14 tires
aspire front and rear brakes
aspire rear axle and front knuckles
aspire front sway bar
toyota 1zz cops
i probably missed some things so if you have questions just ask
if your buddy wants to run a BP+G25MR swap in a festy i sell full custom swap crossmember, mount, intermediate shaft bracket kits.
quick run down on my set up
95 EGT BP stock flywheel
95 EGT trans converted to cable clutch
mercury capri XR2 axles and intermediate shaft
Aint No Bitch Motorsports custom front motor mount and cross member
Aint No Bitch Motorsports intermediate shaft bracket
spec stage 3+ clutch
evo3 big 16G
ebay 3" in 3" out FMIC and pipe
2.5" full custom turbo back exhaust
38mm tial open dump wastegate
1000cc fiveO injectors
MS1v3.0 set up to run like a miata with a NA CAS
14x6.5 toora wheels doral sdl 60 185/60/14 tires
aspire front and rear brakes
aspire rear axle and front knuckles
aspire front sway bar
toyota 1zz cops
i probably missed some things so if you have questions just ask
if your buddy wants to run a BP+G25MR swap in a festy i sell full custom swap crossmember, mount, intermediate shaft bracket kits.
#9
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Your 60' times are horrible and with the MPH you are running at the 1/8th mile you should be in the 7.50-7.70 range. On my old set up which was a M45 based SC and a 50hp shot of Nitrous (@ 240rwhp) the car ran
60' ft 1.779
330' 5.293
594' 7.603
1/8th 8.108
1/8th MPH 83.46
That was on a set of 205mm wide NT01's that were somewhere well beyond shot. If you can work on your launch and shifting the car might actually be able to run in the 11's with your current set up.
60' ft 1.779
330' 5.293
594' 7.603
1/8th 8.108
1/8th MPH 83.46
That was on a set of 205mm wide NT01's that were somewhere well beyond shot. If you can work on your launch and shifting the car might actually be able to run in the 11's with your current set up.
#10
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
yeah, but with a fwd adn street tire, it's crazy hard to get 2.0 60'.best ever in my mx-3 with gt35 trim t3t4 on a jdm gtr BP was 1.698 with a set of 15x10 MT slicks.
fastivab6tg25mr, how can you run consistent 12 sec dun withour fubar transmition/diff? aren't you running a g-type?
also, had you ever tried to launch in second gear?
fastivab6tg25mr, how can you run consistent 12 sec dun withour fubar transmition/diff? aren't you running a g-type?
also, had you ever tried to launch in second gear?
#12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
i was breaking DOZEN of those with slicks.nothing to do.
if it's not the spidergear creating vent hole in the trasnmition casing, it's third gear that simply shread to nothingness.
i was piling up transmition during winter to be able to go abuse the car during summer, there is next to no alternative,and going for a mfactory or quaife lsd doesn't solve anything:(
best of luck, going mid12's with streeet tire if pretty impresive!
if it's not the spidergear creating vent hole in the trasnmition casing, it's third gear that simply shread to nothingness.
i was piling up transmition during winter to be able to go abuse the car during summer, there is next to no alternative,and going for a mfactory or quaife lsd doesn't solve anything:(
best of luck, going mid12's with streeet tire if pretty impresive!
#13
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 568
Total Cats: 162
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
the toyota E153 is the answer to the trans problem in the protege world... too bad its way to wide t fit in my car... i have 1-2MM bethwwn my alt pulley and the frame rail and barely enough room to slide a piece of paper between my trans and the frame rail on the other side
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Your 60' times are horrible and with the MPH you are running at the 1/8th mile you should be in the 7.50-7.70 range. On my old set up which was a M45 based SC and a 50hp shot of Nitrous (@ 240rwhp) the car ran
60' ft 1.779
330' 5.293
594' 7.603
1/8th 8.108
1/8th MPH 83.46
That was on a set of 205mm wide NT01's that were somewhere well beyond shot. If you can work on your launch and shifting the car might actually be able to run in the 11's with your current set up.
60' ft 1.779
330' 5.293
594' 7.603
1/8th 8.108
1/8th MPH 83.46
That was on a set of 205mm wide NT01's that were somewhere well beyond shot. If you can work on your launch and shifting the car might actually be able to run in the 11's with your current set up.
Also you can't compare you're rwd times to his fwd, don't work like that. Maybe I should compare my gvr4 time slips to yours and make fun of and tell you if you learn to drive better, you could be as fast as I am? Lol