Nb dash gutting
#1
Nb dash gutting
Tried to search, but my google fu is weak.
when putting the dash back in my challenge car today, i realized just how heavy it is. Wow.
this will be a hpde/autocross/challenge car. So, need to keep heater and gauges. Mirror switch. Id also like to keep the dash stock appearing from a visual standpoint. Will still be using all factory mounts to the car, as well as the steering column mounts.
what all have you guys done to lighten these? Im planning on the air bag delete, but that should only get about 5 lbs is my guess.
throw out what/how/how much you did, and rough estimate of the results.
thanks guys.
Michael
when putting the dash back in my challenge car today, i realized just how heavy it is. Wow.
this will be a hpde/autocross/challenge car. So, need to keep heater and gauges. Mirror switch. Id also like to keep the dash stock appearing from a visual standpoint. Will still be using all factory mounts to the car, as well as the steering column mounts.
what all have you guys done to lighten these? Im planning on the air bag delete, but that should only get about 5 lbs is my guess.
throw out what/how/how much you did, and rough estimate of the results.
thanks guys.
Michael
#3
I gutted most of the dash in my NB. I gutted the HVAC vents but kept the defroster and floor fans. All of the eyeball vents have been gutted. I cut as much of the dash support off as I could, but I kept the bar and trans tunnel supports in place for safety reasons. I also moved my ECU to the passenger side airbag location with a harness extension. I gutted most of the un-necessary wiring out of the interior harness.
No idea how much weight it saved, but it did make my dash more simple and easier to remove.
No idea how much weight it saved, but it did make my dash more simple and easier to remove.
#6
The dash houses: the dash support bar (needed to attach the actual plastic dash to the car), the ducting for HVAC (all plastic and light), wiring (need), airbag, and the actual plastic dash which is an overlay over the support bar. The airbag cover, which is plastic can be removed and reattached to the dash. The AC box is attached to the firewall and can be removed and replaced with a piece of ducting from Mazda, but I assumed you already did that.
#9
The passenger airbag in my NA was 10.3lbs. NB is probably similar.
You could do an NA6 dash swap. Andy Hollis managed to make an NA6 dash fit his K24 NB.
Some reference weights:
My NA6 dash was 25.75lb before cutting.
The Evaporator was 6.5lb
Again, this is all on my 95 but the the hvac weights ought to be similar on the NB.
You could do an NA6 dash swap. Andy Hollis managed to make an NA6 dash fit his K24 NB.
Some reference weights:
My NA6 dash was 25.75lb before cutting.
The Evaporator was 6.5lb
Again, this is all on my 95 but the the hvac weights ought to be similar on the NB.
#10
Elite Member
iTrader: (15)
Join Date: Jan 2007
Location: Murfreesboro,TN
Posts: 2,076
Total Cats: 283
The passenger airbag in my NA was 10.3lbs. NB is probably similar.
You could do an NA6 dash swap. Andy Hollis managed to make an NA6 dash fit his K24 NB.
Some reference weights:
My NA6 dash was 25.75lb before cutting.
The Evaporator was 6.5lb
Again, this is all on my 95 but the the hvac weights ought to be similar on the NB.
You could do an NA6 dash swap. Andy Hollis managed to make an NA6 dash fit his K24 NB.
Some reference weights:
My NA6 dash was 25.75lb before cutting.
The Evaporator was 6.5lb
Again, this is all on my 95 but the the hvac weights ought to be similar on the NB.
#12
As this is a grm challenge car first and foremost, an na6 dash swap is probably not feasible.
additionally, car will probably wind up in xp due to the turbo v6. So we can get pretty radical.
the graph you posted: what are the numbers? Ive been trying to make sense of it, but with no success.
additionally, car will probably wind up in xp due to the turbo v6. So we can get pretty radical.
the graph you posted: what are the numbers? Ive been trying to make sense of it, but with no success.
#15
This has mostly been covered, but I'll throw in a pic for posterity. The ducting that is attached to the dash is very light plastic, and you wouldn't gain much from removing it. The stereo and airbags will be much more significant. The blower motor, AC and heater elements are all attached to the firewall, and while there's a considerable amount of weight there, you're stuck with it if you want to retain any of the HVAC.
NB dash, and HVAC ducting:
On my NA track car, I removed all the HVAC parts and will be using a boat blower motor for defrost duty, if I ever get around to installing it.
NB dash, and HVAC ducting:
On my NA track car, I removed all the HVAC parts and will be using a boat blower motor for defrost duty, if I ever get around to installing it.
https://www.amazon.com/Attwood-Blower-Resist-White-3-Inch/dp/B001O0DE9E/ref=sr_1_1?ie=UTF8&qid=1516802318&sr=8-1&keywords=atwood+blower
#16
Looking at your picture, and not my particular dash, what are the thoughts about drilling all the support structure except the tube? Seems like theres quite a bit of weught there.
also, how are you planning to heat/attach the blower to the defrost vents? Defrost is my main concern causing me to want to retain the hvac stuff. If i can delete it all cheap enough, i happily will.
also, how are you planning to heat/attach the blower to the defrost vents? Defrost is my main concern causing me to want to retain the hvac stuff. If i can delete it all cheap enough, i happily will.
#17
also, how are you planning to heat/attach the blower to the defrost vents? Defrost is my main concern causing me to want to retain the hvac stuff. If i can delete it all cheap enough, i happily will.
#18
BimmerWorld Front Windshield Defroster Kit
I do think ditching the heatercore isn't quite as straight forward as you would think. you have to do some serious consideration of the mixing manifold setup. I believe that info is in teh cooling system thread.
I do think ditching the heatercore isn't quite as straight forward as you would think. you have to do some serious consideration of the mixing manifold setup. I believe that info is in teh cooling system thread.
#19
BimmerWorld Front Windshield Defroster Kit
I do think ditching the heatercore isn't quite as straight forward as you would think. you have to do some serious consideration of the mixing manifold setup. I believe that info is in teh cooling system thread.
I do think ditching the heatercore isn't quite as straight forward as you would think. you have to do some serious consideration of the mixing manifold setup. I believe that info is in teh cooling system thread.
If you get creative you can end up with....
20171024_182448 by concealer404, on Flickr