Katech V4 for a Miata?
#1
Junior Member
Thread Starter
iTrader: (8)
Join Date: Jul 2008
Location: Portland, OR
Posts: 401
Total Cats: 9
Katech V4 for a Miata?
Hmm just ran across this engine v4 Katech | Katech Inc.
Apparently it has already been put in a motorcycle, but given it's lightness it would seem like an ideal match for a miata or perhaps the catfish kit car?
Given I have no idea how much they cost or what kind of transmission they can be mated to, just seemed like a cool concept-a motorcycle engine oriented in the right way to power a RWD car.
Apparently it has already been put in a motorcycle, but given it's lightness it would seem like an ideal match for a miata or perhaps the catfish kit car?
Given I have no idea how much they cost or what kind of transmission they can be mated to, just seemed like a cool concept-a motorcycle engine oriented in the right way to power a RWD car.
Last edited by Joe Perez; 01-23-2013 at 10:35 PM. Reason: Your leenk! I feex!
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,456
Total Cats: 6,874
While 350 HP / 360 ft lbs in a package weighing 162 lbs is extremely appealing, I can't imagine that this engine could cost less than a complete LS3 swap, including the Miata to put it in.
Exotic, artisan engines like this are never cheap. The Radical SR8 (double-Hayabusa) engine, for instance, sells for around £20,000 (~$31,600), and that engine uses off-the-shelf heads.
#4
Just buy a wrecked corvette and call up Fae.
The rest will be history and for 1/4 the price.
On a serious note: only the f/i version makes impressive power/torque, all of which would easily be achieved by a bone stock ls, or a honda engine, or even a miata engine.
Which begs the (probably) obvious question: is low weight and compactness what makes you guys lust after something like this?
The rest will be history and for 1/4 the price.
On a serious note: only the f/i version makes impressive power/torque, all of which would easily be achieved by a bone stock ls, or a honda engine, or even a miata engine.
Which begs the (probably) obvious question: is low weight and compactness what makes you guys lust after something like this?
#6
Junior Member
Thread Starter
iTrader: (8)
Join Date: Jul 2008
Location: Portland, OR
Posts: 401
Total Cats: 9
Given that "The V4 draws on the legendary architecture of the Corvette LS series V8," I'm going to go out on a limb and postulate that perhaps it's capable of mating with the same bellhousing that the LS-series engines use.
While 350 HP / 360 ft lbs in a package weighing 162 lbs is extremely appealing, I can't imagine that this engine could cost less than a complete LS3 swap, including the Miata to put it in.
Exotic, artisan engines like this are never cheap. The Radical SR8 (double-Hayabusa) engine, for instance, sells for around £20,000 (~$31,600), and that engine uses off-the-shelf heads.
While 350 HP / 360 ft lbs in a package weighing 162 lbs is extremely appealing, I can't imagine that this engine could cost less than a complete LS3 swap, including the Miata to put it in.
Exotic, artisan engines like this are never cheap. The Radical SR8 (double-Hayabusa) engine, for instance, sells for around £20,000 (~$31,600), and that engine uses off-the-shelf heads.
#7
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,930
Total Cats: 404
OK here's what I got cause I know people who know people's cell phone numbers.
It's NOT the Motus engine. Katech and Motus have gone their separate ways. This is a different engine than what is in the Motus.
This engine is est. 6-12 months away from being ready to ship with more definite pricing.
Estimated price at the moment ~$15k. They do have engines there if you really want one and in customers stuff already but they are small production things with small production pricing. They are trying to find various applications/customers who will buy some in quantity, which will allow them to lower the cost on everything and get the price (much?) lower than that $15k. That's what they are working on in the next 6-12 months. There's some probable leads in some surprising applications.
It's a generic bellhousing, simple adapter plate need to bolt it to whatever. Fancy independent trumpets for race stuff or a traditional plenum intake recommended for non race stuff.
Besides the cam bearings, there's no LS parts on it. Hydraulic valvetrain.
I want to see some Jesel stuff in there and the RPMs taken to the moon.
It's NOT the Motus engine. Katech and Motus have gone their separate ways. This is a different engine than what is in the Motus.
This engine is est. 6-12 months away from being ready to ship with more definite pricing.
Estimated price at the moment ~$15k. They do have engines there if you really want one and in customers stuff already but they are small production things with small production pricing. They are trying to find various applications/customers who will buy some in quantity, which will allow them to lower the cost on everything and get the price (much?) lower than that $15k. That's what they are working on in the next 6-12 months. There's some probable leads in some surprising applications.
It's a generic bellhousing, simple adapter plate need to bolt it to whatever. Fancy independent trumpets for race stuff or a traditional plenum intake recommended for non race stuff.
Besides the cam bearings, there's no LS parts on it. Hydraulic valvetrain.
I want to see some Jesel stuff in there and the RPMs taken to the moon.
#8
On a serious note: only the f/i version makes impressive power/torque, all of which would easily be achieved by a bone stock ls, or a honda engine, or even a miata engine.
Which begs the (probably) obvious question: is low weight and compactness what makes you guys lust after something like this?
Which begs the (probably) obvious question: is low weight and compactness what makes you guys lust after something like this?
#10
And the fact that it would sound glorious. But mostly because its small and light enough that you could cram it really far back in the engine bay and end up with a rear weight bias rather than a front or 50/50. A 15k engine + a 10k sequential gearbox in a miata or miata based kit car would be glorious to drive I just wish the R engine didnt make peak power at redline and you could rev it past 9500 rpm.
#12
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,456
Total Cats: 6,874
This thread seems kind of silly to me.
If you want a lightweight engine that turns eleventy billion RPM with a sequential gearbox for a kit-car, buy a wrecked Hayabusa.
If you want a 300 HP engine for a stock-bodied Miata with a sequential gearbox, build up a stock engine and then call Hewland and pay them a silly amount of money to adapt one of their units to the Miata.
If you want enough torque to move mountains, and clearly have money to blow, just mail your car to FM along with a check for $25k.
Aisde from being somewhat unique, I'm not sure why this engine would be desirable in a Miata.
If you want a lightweight engine that turns eleventy billion RPM with a sequential gearbox for a kit-car, buy a wrecked Hayabusa.
If you want a 300 HP engine for a stock-bodied Miata with a sequential gearbox, build up a stock engine and then call Hewland and pay them a silly amount of money to adapt one of their units to the Miata.
If you want enough torque to move mountains, and clearly have money to blow, just mail your car to FM along with a check for $25k.
Aisde from being somewhat unique, I'm not sure why this engine would be desirable in a Miata.
#13
1.) Come on, Joe. The fact that there are options already doesn't mean there aren't better ones.
2.) The Motus engine would be fairly well suited to a Miata if the gearbox is strong enough, I.E. stronger than a Hayabusa gearbox. They don't have reverse, though, which would kind of suck in a street car.
I have nothing to add about this mysterious engine that Katech built without a market for. Seems like a strange business decision, unless it's just the Motus engine with the Motus badges taken off and a bellhousing flange added.
2.) The Motus engine would be fairly well suited to a Miata if the gearbox is strong enough, I.E. stronger than a Hayabusa gearbox. They don't have reverse, though, which would kind of suck in a street car.
I have nothing to add about this mysterious engine that Katech built without a market for. Seems like a strange business decision, unless it's just the Motus engine with the Motus badges taken off and a bellhousing flange added.
#14
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,456
Total Cats: 6,874
I just can't quite wrap my head around how a 4 cyl engine that costs ~$15,000 in raw form (plus accessories, mounts, electrics, transmission adapter, etc) is a significant improvement in any meaningful way over either boosting the **** out of a BP engine or transplanting a mass-produced V8 drivetrain into the car.
Both of these options are cheaper, both are potentially faster.
With ideas like this, we sometimes look at them and say "wow, that's totally new and revolutionary!"
Except that the V-4 engine isn't.
Motorcycle makers have been building 'em for a while. The Yahama V-Max is probably the best known, though Honda has dabbled in them as well. Ford and Saab have built a couple of them, as did the Russian company ZAZ during the soviet era. During the 90s, there was some company building custom V4 engines for use in air-cooled VW applications, though I can't remember the name.
The reason they're not all that popular, frankly, is that they suck. You get all the added cost and complexity of a V engine in a displacement class which, aside from motorcycle and outboard engines, usually isn't all that space-constrained. And to top it off, they just don't run very smoothly. Even with a balance-shaft, V-4 engines are rough little buggers.
So, yeah. It's a neat re-take on a classic concept. But if it seems like I'm being a bit of a Gloomy Gus on this particular design, that's mostly because it's been tried (and failed at) many times over many decades. There are better solutions.
#16
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,456
Total Cats: 6,874
For such an application, I would, without question, use an inline-4 motorcycle engine. Massively cheaper, lighter weight, easy off-the-shelf parts availability, and a built-in sequential transmission to boot.
#17
Cool little motor. I kind of agree with joe, that it's not really feasible to shove one in a miata. However, this motor would an amazing thing in a one off tube chassis, single seater type car. Tiny, lightweight, go kart type handling, and absurdly light would be an extremely fun package.
I'm with joe on this one but didn't want to be the one to start the "hate" cause people would cry about me being a hater like always lol
#19
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,456
Total Cats: 6,874
Seriously, though. I do think it's cool that these folks have decided to build their own engine. I am envious of their skillz (and machine shop.)
And some of these insane custom engines actually meet with my personal seal of approval. Want a genuine F1-style engine for your atom-esque car? The double-hayabusa V8 is a fine (if expensive) solution which offers light weight and extremely high specific output in a nice, compact package.
But this specific design (the LS-inspired V4) seems to be the answer to a question which nobody is asking.
For "real" race applications, there are a number of mass-produced OEM engines which have been proven at the track, are readily available, and don't cost huge amounts of money to build.
For "fun" applications like the street cart or lightweight formula-style kit cars, modern inline-4 motorcycle engines have proven to be an excellent and cost-effective solution. There are a variety of companies building components to adapt them to automotive use, including inline reverse boxes (for front-engined cars) and reversing diffs (for mid-engined cars).
For full-bodied street cars, we have forced-induction solutions available for pretty much every make and model ever created, plus a variety of well-documented V8 swap options, some of which are even available in kit form.
I cannot think of any application in which a one-off V4 engine such as this would be superior in any way (cost, reliability, power, ease-of-installation, parts availability, etc) to one of the solutions mentioned above.
#20
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,982
Total Cats: 1,024
But it would be cool. No it's not the most practical thing. But why does the Spyker C8 Laviolette exist? It's outperformed in almost ever measure by a base Corvette, yet it costs upwards of $300,000. And people buy them. Because they're different.
I agree that it's not an ideal motor for a Miata, or really an ideal motor for anything. But it's freaking cool, powerful, would have a neat sound and look, and is based on old-school tech that produces very modern performance. And it's cool.
I agree that it's not an ideal motor for a Miata, or really an ideal motor for anything. But it's freaking cool, powerful, would have a neat sound and look, and is based on old-school tech that produces very modern performance. And it's cool.