How to tell if suspension is bent
#1
Elite Member
Thread Starter
iTrader: (5)
Join Date: Dec 2010
Location: Raleigh, NC
Posts: 1,961
Total Cats: 48
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just got back from the alignment shop...the bad news is it seems I have something is bent as my front passenger camber can't get higher than 1.4*. Oddly enough my caster is fine (he was able to put in 6* there). I can't think of how anything got bent really, visually the subframe and the control arms look fine. I don't see any new rust spots or bends/dents. Anyone have a better way of checking for such things? or should I just say ---- it and buy a new LCA?
The good news, if any, is that I replaced all the eccentrics in an attempt to get this fixed.
The good news, if any, is that I replaced all the eccentrics in an attempt to get this fixed.
#3
Elite Member
Thread Starter
iTrader: (5)
Join Date: Dec 2010
Location: Raleigh, NC
Posts: 1,961
Total Cats: 48
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
hmm thats an idea...at 68k miles, does it seem reasonable that that is the culprit? My has only been tracked on street tires, and like I said, never hit a curb, and other than a few offs on track, I haven't really abused it.
I feel like if I am going to take ---- apart to replace, then I might as well do them all. Is it possible the UCA is damaged also?
I have a track event on the 11th, so I am a bit short on time here.
I feel like if I am going to take ---- apart to replace, then I might as well do them all. Is it possible the UCA is damaged also?
I have a track event on the 11th, so I am a bit short on time here.
#7
Elite Member
Thread Starter
iTrader: (5)
Join Date: Dec 2010
Location: Raleigh, NC
Posts: 1,961
Total Cats: 48
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just out of curiosity, do you guys replace this stuff with used or new? I can see control arms being fine used (as long as they aren't bent also), but what about ball joints and the such?
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Im posting here for results. Im having very similar issues with the car. I cant tell specifics yet, but this weekend we will be aligning the car and I will be able to get more details. Ever since I bought the car it has been understeer city. I know that part of the issue is ride height, therefore we raised the car. I believe it is at 5.25 now as well.
Regardless of that, this car has always been impossible to get a decent alignment on.
Joe, tell me what comes out of your car asap. You may need the same stuff I need.
Regardless of that, this car has always been impossible to get a decent alignment on.
Joe, tell me what comes out of your car asap. You may need the same stuff I need.
![Dunno](https://www.miataturbo.net/images/smilies/dunno.gif)
#10
Elite Member
Thread Starter
iTrader: (5)
Join Date: Dec 2010
Location: Raleigh, NC
Posts: 1,961
Total Cats: 48
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
SO, I got the camber gauge and toe plates out among a few home depot tools and fucked with the alignment on the left side. I was about to get about 1.5* of camber and a total of maybe ~5.5* of caster. I checked the other side and it went up? Apparently I am at 2.5* camber on the right side and ~6* of caster. Is that normal? I adjusted the toe back to zero, so I am doubtful its stemming from that.
I am thinking it really might be the control arm. Andrew and Nick, have you guys experienced that the ball joint is usually what goes out?
I am thinking it really might be the control arm. Andrew and Nick, have you guys experienced that the ball joint is usually what goes out?
#11
Elite Member
iTrader: (14)
Join Date: Sep 2009
Location: Birmingham, AL
Posts: 2,101
Total Cats: 180
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just incase you need upper CA ball joints only - if the CAs are not bent, miataroadster sells new upper joints by the pair - $150 (made by V8roadsters). Only other NEW way is Maz upper CAs at $200+ each ![eek!](https://www.miataturbo.net/images/smilies/eek4.gif)
![eek!](https://www.miataturbo.net/images/smilies/eek4.gif)
![](https://www.miataturbo.net/attachments/race-prep-75/33253-how-tell-if-suspension-bent-d5b097c0-4945-4738-a887-c23c9744f3a2-420.jpg?dateline=1328274258)
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
They are. I think you have to do a fair bit of machine work for the V8r joints to work.
Also, I had this issue a while back, new (used anyway) LCA fixed it for me. Visually, there was no difference in the arms, but the lower was tweaked in some way that was bad enough I couldnt get the alignment I was looking for.
Also, I had this issue a while back, new (used anyway) LCA fixed it for me. Visually, there was no difference in the arms, but the lower was tweaked in some way that was bad enough I couldnt get the alignment I was looking for.
#17
Elite Member
Thread Starter
iTrader: (5)
Join Date: Dec 2010
Location: Raleigh, NC
Posts: 1,961
Total Cats: 48
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I don't have a press, but I do have jaw pullers, if those work, then I will consider this an option if an LCA doesn't fix it. I am really tempted to just pull the trigger on an LCA anyway, @$75 its not exactly a bank breaker, and I would rather have it in case the LBJ doesn't work...------ decisions man. Why don't I have a lady friend make them for me?!?...oh wait, nm that won't help.
#18
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Learn something new every day:
http://miataroadster.com/v8_roadster.../i-409013.aspx
While these look bauce, I'd probably just call Mazda Dev for $94 new CA w/joint, especially if you think the CA may be bent. Perfect time to install polly bushings too. How long are these things lasting for the Spec/turbo/ax track guys? They go something like 100k+mi on the street, sometimes OEM is hard to beat
http://miataroadster.com/v8_roadster.../i-409013.aspx
Front upper ball joints are critical to accurate steering. Until now, the only way to get replacements for worn-out ball joints was to buy entire new control arms from Mazda for over $300 per pair.
V-8 Roadsters has finally solved this dilemma with their replacement ball joints. They are far higher quality than the factory ones as well as being adjustable, rebuildable, and lubricate-able.
V-8 Roadsters has finally solved this dilemma with their replacement ball joints. They are far higher quality than the factory ones as well as being adjustable, rebuildable, and lubricate-able.
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Learn something new every day:
http://miataroadster.com/v8_roadster.../i-409013.aspx
While these look bauce, I'd probably just call Mazda Dev for $94 new CA w/joint, especially if you think the CA may be bent. Perfect time to install polly bushings too. How long are these things lasting for the Spec/turbo/ax track guys? They go something like 100k+mi on the street, sometimes OEM is hard to beat
http://miataroadster.com/v8_roadster.../i-409013.aspx
While these look bauce, I'd probably just call Mazda Dev for $94 new CA w/joint, especially if you think the CA may be bent. Perfect time to install polly bushings too. How long are these things lasting for the Spec/turbo/ax track guys? They go something like 100k+mi on the street, sometimes OEM is hard to beat
#20
Elite Member
Thread Starter
iTrader: (5)
Join Date: Dec 2010
Location: Raleigh, NC
Posts: 1,961
Total Cats: 48
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Rosenthal:
http://parts.arlingtonmazda.com/prod...52d250%29.html
Mazdaspeed dev. you need to have an account, but here is a screen shot:
http://parts.arlingtonmazda.com/prod...52d250%29.html
Mazdaspeed dev. you need to have an account, but here is a screen shot:
![](https://www.miataturbo.net/attachments/race-prep-75/33280d1328298302-how-tell-if-suspension-bent-controlarm.jpg)