Hood pins
#21
Senior Member
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
When I installed my hood pins on my Spec I removed mthe latch. I wish I had not I was always worrind about someone going into my engine bay (not that they did). I would recomend leaving it in and getting the cheapo hood pins. That way you can have some security. If you want to remove the cable for the latch you can fab a cable up so that you can pop the hood from the front of the car near the oppening.
Have a great day,
Jared
Have a great day,
Jared
#23
Elite Member
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The Aerocatch latches are nice and I seriously considered those for my DD when I was looking for extra space for an IC (no stock latch).
BTW FWIW I only went to hood pins because I needed to get rid of the stock hood latch assy to make room for the oil cooler. Otherwise it was really not necessary for me. The stock latch is not hugely heavy and thus I would not consider it low hanging fruit on the weight reduction tree.
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The pins in option 2 are cast. I got hit in the left front fender in a race and exactly one lap later both pins cracked/came apart and the hood came up... in the middle of turn 5 at Rd. Atlanta. Not that they'll ever crack w/o impact, but knowing that (if you go the pin & post route) you might consider the "hitch" pins mentioned since they are not cast.
#25
Elite Member
iTrader: (14)
Join Date: Sep 2009
Location: Birmingham, AL
Posts: 2,101
Total Cats: 180
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
AeroCatch® - new design of bonnet pin, available in locking or non-locking versions – see how it works.........
Because hustler and I are ballerz
Because hustler and I are ballerz
#26
Elite Member
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Funny but I just picked up the latest issue of GRM today. There is a good article on practical aero design/setup for low budget race cars. They listed some of the common aero mistakes, one of which was... drum roll... Don't use the regular style (what I used) hood pins. Apparently they can create appreciable drag
They did not say how much. I doubt it is huge so I am not going to sweat it.
So there is a benefit to the Aerocatch latches beyond just the baller look. That is intuitive but the timing with this thread is funny.
![facepalm](https://www.miataturbo.net/images/smilies/facepalm.gif)
So there is a benefit to the Aerocatch latches beyond just the baller look. That is intuitive but the timing with this thread is funny.
#27
Cpt. Slow
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yes the Aerocatch latches are the most aerodynamic of the options. However because of the price I doubt GRM will ever recommend only those. And since on a miata you shouldn't be stripping the stock hood of it's bracing, you'll only be adding weight with those latches. I'm all about my $12 pins.
A cheap piece of stainless or aluminum rod and a cross hole later, and I'd have pins that wouldn't rust. I'm just too lazy. I think mine are actually chrome plated, they've just chipped and it's rusting where the plating is gone. Meh.
A cheap piece of stainless or aluminum rod and a cross hole later, and I'd have pins that wouldn't rust. I'm just too lazy. I think mine are actually chrome plated, they've just chipped and it's rusting where the plating is gone. Meh.
#34
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just to add a data point on the op. Those carbon circle keyed latches are a big no no. Buddy of mine has a v8 AE86 and at MSRC people kept coming up to look at the car and the motor. He opened the hood like 10 times that day and thought it was locked when he entered the track. Nope, crushed windsheild and cracked carbon hood. You cant tell if there locked or open.
Jake
Jake
#36
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I did hood pins on our LeMons car.
2 X Used Bolt (Finger/Thumb sized)
<Drilled a small hole in both>
Drill your hood using a universal bit where you want the studs to be.
Place large bolts where you want and weld to frame
(Don't forget to align the direction of your drilled holes where you want to be before you weld. Also take note of the height of the drilled hole so it will be the proper height not to high not to low when before you weld as well.
Get a large thin washer with a small center and drill three small holes in a triangle formation on the outer edges. Use the universal bit to make the center large enough to fit through the hole.
Use the washer as a template to drill the 3 holes in the hood to rivet the washer down.
Bought a pin from Home Depot for $0.97
The End.
2 X Used Bolt (Finger/Thumb sized)
<Drilled a small hole in both>
Drill your hood using a universal bit where you want the studs to be.
Place large bolts where you want and weld to frame
(Don't forget to align the direction of your drilled holes where you want to be before you weld. Also take note of the height of the drilled hole so it will be the proper height not to high not to low when before you weld as well.
Get a large thin washer with a small center and drill three small holes in a triangle formation on the outer edges. Use the universal bit to make the center large enough to fit through the hole.
Use the washer as a template to drill the 3 holes in the hood to rivet the washer down.
Bought a pin from Home Depot for $0.97
The End.
Thread
Thread Starter
Forum
Replies
Last Post
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM