View Poll Results: I hate re-route
Option 1
![](https://www.miataturbo.net/mt2011/images_td/polls/bar2-l.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar2.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar2-r.gif)
![](https://www.miataturbo.net/clear.gif)
21
72.41%
Option 2
![](https://www.miataturbo.net/mt2011/images_td/polls/bar3-l.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar3.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar3-r.gif)
![](https://www.miataturbo.net/clear.gif)
8
27.59%
Voters: 29. You may not vote on this poll
Coolant mother f**king reroute
#43
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,340
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Granted, it's been a while since I lived in FL, and I was further up the coast where the temps are a bit cooler and the average person has finished Jr. High school, but I don't recall that the daytime temperature was anywhere near 180°F, even in the summertime.
[IMG]RadioactiveDildos.gif[/IMG]
[IMG]RadioactiveDildos.gif[/IMG]
#44
I'm a terrible person
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If you want the absolute best possible design, you need a bypass-style thermostat. It's a Y-valve, which directs water out to one port when cold, and out to a different port when hot. Plumb the "cold" port to the water pump inlet, and the "hot" port to the upper radiator hose.
Stant 13578 Thermostat
![](https://www.miataturbo.net/attachments/race-prep-75/23614-coolant-mother-f%2A%2Aking-reroute-41ety6afrel._ss400_.jpg?dateline=1314481332)
Stant 13578 Thermostat
![](https://www.miataturbo.net/attachments/race-prep-75/23614-coolant-mother-f%2A%2Aking-reroute-41ety6afrel._ss400_.jpg?dateline=1314481332)
#46
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Why are you guys so wrapped up about water flow and don't address the air flow problem created from the installation of the intercooler.
The reason for the over heating is from the design of our front end and the placement we all choose for our intercoolers. We all end up with a half of a radiator.
If we could cut our car in half we could see that the intercooler prevents air reaching the upper half of the radiator and the air provided to the lower half is preheated by the intercooler.
Take a look at the picture. The air that enters the intercooler can only exit into the the lower portion of the condensor or radiator. For air to reach the upper portion of the radiator it must squeze between the upper edge of the intercooler and the front bumper support. Depending on the size of your intercooler of course. My FM only allows about 1/2 inch.
So allowing air from somewhere to feed the upper portion of the radiator would effectively double the cooling ability of the radiator.
My solution was to feed air from the fog light openings to the opening just to each side of my intercooler. Since I made this change I have not had any overheat problems. A month ago I went to Carolina Motorsport Park for a HPDE. I am running a 3071R at 12PSI and make 265 on a mustang dyno (what ever that truly is) and ran hard all weekend and didnt see the temp budge from normal. I do have the FM radiator but have the stock fans and I think one is dieing. I do run water wetter and a 180 degree thermostat but everything else is factory mazda.
Try providing some air up there and see what happens.
![Name: grille.bmp
Views: 2385
Size: 440.9 KB](https://www.miataturbo.net/attachments/race-prep-75/23948d1314668005-coolant-mother-f%2A%2Aking-reroute-grille.bmp)
![Coolant mother f**king reroute-phto1215.jpg](https://www.miataturbo.net/attachments/race-prep-75/23949d1467835700t-coolant-mother-f%2A%2Aking-reroute-phto1215.jpg)
![Coolant mother f**king reroute-phto1220.jpg](https://www.miataturbo.net/attachments/race-prep-75/23950d1467835700t-coolant-mother-f%2A%2Aking-reroute-phto1220.jpg)
The reason for the over heating is from the design of our front end and the placement we all choose for our intercoolers. We all end up with a half of a radiator.
If we could cut our car in half we could see that the intercooler prevents air reaching the upper half of the radiator and the air provided to the lower half is preheated by the intercooler.
Take a look at the picture. The air that enters the intercooler can only exit into the the lower portion of the condensor or radiator. For air to reach the upper portion of the radiator it must squeze between the upper edge of the intercooler and the front bumper support. Depending on the size of your intercooler of course. My FM only allows about 1/2 inch.
So allowing air from somewhere to feed the upper portion of the radiator would effectively double the cooling ability of the radiator.
My solution was to feed air from the fog light openings to the opening just to each side of my intercooler. Since I made this change I have not had any overheat problems. A month ago I went to Carolina Motorsport Park for a HPDE. I am running a 3071R at 12PSI and make 265 on a mustang dyno (what ever that truly is) and ran hard all weekend and didnt see the temp budge from normal. I do have the FM radiator but have the stock fans and I think one is dieing. I do run water wetter and a 180 degree thermostat but everything else is factory mazda.
Try providing some air up there and see what happens.
![Name: grille.bmp
Views: 2385
Size: 440.9 KB](https://www.miataturbo.net/attachments/race-prep-75/23948d1314668005-coolant-mother-f%2A%2Aking-reroute-grille.bmp)
![Coolant mother f**king reroute-phto1215.jpg](https://www.miataturbo.net/attachments/race-prep-75/23949d1467835700t-coolant-mother-f%2A%2Aking-reroute-phto1215.jpg)
![Coolant mother f**king reroute-phto1220.jpg](https://www.miataturbo.net/attachments/race-prep-75/23950d1467835700t-coolant-mother-f%2A%2Aking-reroute-phto1220.jpg)
![Coolant mother f**king reroute-phto1224.jpg](https://www.miataturbo.net/attachments/race-prep-75/23951d1467835700t-coolant-mother-f%2A%2Aking-reroute-phto1224.jpg)
#47
I'm a terrible person
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It's known Mazda didn't design the cooling system to allow for good flow to the rear of the engine.
Not saying what you have said isn't true, but there is no denying the reroutes work. And for the $79 I'm going to spend doing it, with almost no labor involved, why not? Not much trouble here.
Why not do both?
We are wrapped up about it in this thread because it's a coolant reroute thread. Now if you were in a radiator air flow thread, and we were talking about coolant reroutes you might have a valid point.
Not saying what you have said isn't true, but there is no denying the reroutes work. And for the $79 I'm going to spend doing it, with almost no labor involved, why not? Not much trouble here.
Why not do both?
We are wrapped up about it in this thread because it's a coolant reroute thread. Now if you were in a radiator air flow thread, and we were talking about coolant reroutes you might have a valid point.
#49
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Mazda didn't think so:
![](https://www.miataturbo.net/attachments/race-prep-75/23965-coolant-mother-f%2A%2Aking-reroute-gtx1.jpg?dateline=1314708943)
Is quoting a banned member like arguing with a dead man?
Joe:
Your post is ******* win. I now, after 29 yrs of walking the face of this planet, FINALLY know how to answer when someone asks: "If you could have lunch with any 3 people, living or dead, who would they be?", and I'd even call you with the GPS coordinates to the cafe before ringing up Sagan and Hawking.
OP:
The simplest, cheapest, effective reroute I found is detailed somewhat here:
https://www.miataturbo.net/showpost....1&postcount=53
Someone else had a list of all the parts but I can't find it at the moment. You simply switch the two housings. Then run one heater line to the back if you're keeping the heater core, or simply drop it down to a barb on the mixing manifold for a heater core delete and keep circulation. The metal pipe can be found at HomeDepot and they make ones with a 90* bend in the end of them so that the rear hose is just a straight shot instead of the funky hose I used.
It can also be cleaned up better than what those old pics show.
![](https://www.miataturbo.net/attachments/race-prep-75/23965-coolant-mother-f%2A%2Aking-reroute-gtx1.jpg?dateline=1314708943)
Is quoting a banned member like arguing with a dead man?
Joe:
Your post is ******* win. I now, after 29 yrs of walking the face of this planet, FINALLY know how to answer when someone asks: "If you could have lunch with any 3 people, living or dead, who would they be?", and I'd even call you with the GPS coordinates to the cafe before ringing up Sagan and Hawking.
OP:
The simplest, cheapest, effective reroute I found is detailed somewhat here:
https://www.miataturbo.net/showpost....1&postcount=53
Someone else had a list of all the parts but I can't find it at the moment. You simply switch the two housings. Then run one heater line to the back if you're keeping the heater core, or simply drop it down to a barb on the mixing manifold for a heater core delete and keep circulation. The metal pipe can be found at HomeDepot and they make ones with a 90* bend in the end of them so that the rear hose is just a straight shot instead of the funky hose I used.
It can also be cleaned up better than what those old pics show.
#50
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The simplest, cheapest, effective reroute I found is detailed somewhat here:
https://www.miataturbo.net/showpost....1&postcount=53
Someone else had a list of all the parts but I can't find it at the moment. You simply switch the two housings. Then run one heater line to the back if you're keeping the heater core, or simply drop it down to a barb on the mixing manifold for a heater core delete and keep circulation. The metal pipe can be found at HomeDepot and they make ones with a 90* bend in the end of them so that the rear hose is just a straight shot instead of the funky hose I used.
It can also be cleaned up better than what those old pics show.
https://www.miataturbo.net/showpost....1&postcount=53
Someone else had a list of all the parts but I can't find it at the moment. You simply switch the two housings. Then run one heater line to the back if you're keeping the heater core, or simply drop it down to a barb on the mixing manifold for a heater core delete and keep circulation. The metal pipe can be found at HomeDepot and they make ones with a 90* bend in the end of them so that the rear hose is just a straight shot instead of the funky hose I used.
It can also be cleaned up better than what those old pics show.
Buy the kia neck to radiator hose per this thread. https://www.miataturbo.net/useful-saved-posts-8/reroute-hose%3B-kia-neck-radiator-no-hard-line-needed-46698/
Then buy a hose to run the heater hose back and extend the sensor to the front. Anything else?
#51
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,340
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You're a moron because the NGK AFX display isn't quite as pretty as the Innovate XD-16 and yet you still chose to mount one in your car.
Just kidding.![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
That would certainly work in terms of getting flow through the heater core. The problem in my mind is that if you do precisely what has been described, you'd be returning all of the heater core's output directly into the upper radiator hose, and this effectively bypasses the thermostat.
If you want the engine to warm up properly, you need to return the "bypass" water (whether a heater core is involved or not) back to the water pump inlet when the main thermostat is closed. You can "hard-wire" it this way, as is the stock configuration of both the Miata and 323 cooling systems (along with just about every other car out there), or you can use some kind of switchable diverter, such as a bypass thermostat.
Hehe. Every now and then, someone comes up with an idea so hairbrained that it merits a clever retort. I can't just write that stuff on demand, it takes an act of genuine stupidity to really get the creative juices flowing.
I can't take credit. I just write what the muse inspires.
Just kidding.
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
Move tstat to back of head, proceed to reroute as normal, put the heater outlet post-tstat with the heater inlet being pre-tstat.
If you want the engine to warm up properly, you need to return the "bypass" water (whether a heater core is involved or not) back to the water pump inlet when the main thermostat is closed. You can "hard-wire" it this way, as is the stock configuration of both the Miata and 323 cooling systems (along with just about every other car out there), or you can use some kind of switchable diverter, such as a bypass thermostat.
Joe:
Your post is ******* win. I now, after 29 yrs of walking the face of this planet, FINALLY know how to answer when someone asks: "If you could have lunch with any 3 people, living or dead, who would they be?", and I'd even call you with the GPS coordinates to the cafe before ringing up Sagan and Hawking.
Your post is ******* win. I now, after 29 yrs of walking the face of this planet, FINALLY know how to answer when someone asks: "If you could have lunch with any 3 people, living or dead, who would they be?", and I'd even call you with the GPS coordinates to the cafe before ringing up Sagan and Hawking.
I can't take credit. I just write what the muse inspires.
#54
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
That would certainly work in terms of getting flow through the heater core. The problem in my mind is that if you do precisely what has been described, you'd be returning all of the heater core's output directly into the upper radiator hose, and this effectively bypasses the thermostat.
If you want the engine to warm up properly, you need to return the "bypass" water (whether a heater core is involved or not) back to the water pump inlet when the main thermostat is closed. You can "hard-wire" it this way, as is the stock configuration of both the Miata and 323 cooling systems (along with just about every other car out there), or you can use some kind of switchable diverter, such as a bypass thermostat.
If you want the engine to warm up properly, you need to return the "bypass" water (whether a heater core is involved or not) back to the water pump inlet when the main thermostat is closed. You can "hard-wire" it this way, as is the stock configuration of both the Miata and 323 cooling systems (along with just about every other car out there), or you can use some kind of switchable diverter, such as a bypass thermostat.
I planned to route the cursed water plug's output into the heater core, then drop it directly back into the engine that way thus eliminating both the cursed water plug and getting rid of the damned pipe at the same time - I'll have to think on it. While I have no logical reason to hate the heater pipe and associated lines, they irritate me endlessly when I'm trying to work underneath the car and having to fight with the heater hoses to work on various turbo bits is seriously irritating to me as well.
#57
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This re-route involves no spacer, and no Kia water neck. One specific Gates hose (shown in picture), one chrome sink pipe, and one straight section of hose. Besides that there is the longer heater core line, and extending the ECU's temp sensor wiring to it's new home on the front of the block (easier to get to now if that connection is ever lost...keeping you in ridiculous warm-up enrichments).
#60
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Did some more research on my particular car. I've got an Escort GT engine with 2 water exits on the back of the head.
Miata:
![](http://users.telenet.be/miata/images/coolant_reroute/my_reroute/m2_head_rear_plug1.jpg)
Escort GT:
![](http://users.telenet.be/miata/images/coolant_reroute/my_reroute/323fitting.jpg)
So it appears that that fitting flows pre-tstat, and is how I set up my car. I found a hose at Autozone that had a 180 degree bend near the end of it, ran it back towards the driver's side, and just put a barbed fitting (male on both sides) in between the stock heater hose and it. Just another reference for guys with EGT swaps in their cars.
Miata:
![](http://users.telenet.be/miata/images/coolant_reroute/my_reroute/m2_head_rear_plug1.jpg)
Escort GT:
![](http://users.telenet.be/miata/images/coolant_reroute/my_reroute/323fitting.jpg)
So it appears that that fitting flows pre-tstat, and is how I set up my car. I found a hose at Autozone that had a 180 degree bend near the end of it, ran it back towards the driver's side, and just put a barbed fitting (male on both sides) in between the stock heater hose and it. Just another reference for guys with EGT swaps in their cars.
Last edited by Larimer; 09-02-2011 at 12:47 PM.