Brakes overheating over and over and over.
#23
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I wasn't willing to let anybody else drive my car due to the braking issues. Too much liability (not necessarily legal, I just won't let a friend drive the car if I'm concerned with something as critical as the brakes).
The vendor who sold me the ST43s is convinced the issue is with my driving. That being said, I'm new to HPDE but NOT new to the track or solving mechanical issues. My day job is chasing down problems on military aircraft... and this has been ongoing with both street and track driving. I haven't even pulled the wheels on my NA8 street car and it has better pedal feel than my NA6 track car. So there's gotta be something I'm missing.
If it's my driving, I'm not sure what to change. When the brakes were working, I was braking at the same marker as the SM guys. Granted this is only possible due to lower straightaway speeds but the point is I'm braking at 3 HARD not at 5 or earlier at 50%.
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I realized I was braking like a geriatric in a Buick.
#25
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Probably bent spindles. Pads glazing/ overheating when they shouldn't means they are dragging. If the driver does not left foot brake with foot on pedal the whole lap, then the only other cause is a bent spindle(s). This is actually pretty common, Difficult to measure and determine outside of simply replacing the spindle. In Supermiata, it is rare for a spindle to last more than two seasons before brake drag crops up.
One simple check is to raise the car immediately after exiting track and spin the front wheels. If you get 3 or so rotations, you are good. If you can not get more than one rotation even with a strong spin by hand, start checking stuff.
More common culprit is dirty caliper piston bores or worn out (hardened) seals but the OP has covered that.
One simple check is to raise the car immediately after exiting track and spin the front wheels. If you get 3 or so rotations, you are good. If you can not get more than one rotation even with a strong spin by hand, start checking stuff.
More common culprit is dirty caliper piston bores or worn out (hardened) seals but the OP has covered that.
__________________
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Looking back to my truly noob days I recall struggling with pad life and glazing on another car I own. Turns out I was not stepping on the brakes hard enough. I was on em lighter and longer causing them to glaze up.
I think we can all agree it's heat glazing the pads. Why not start by adding some ducting? That maybe all you need. Won't hurt anyway. The spindle idea is interesting too.
I think we can all agree it's heat glazing the pads. Why not start by adding some ducting? That maybe all you need. Won't hurt anyway. The spindle idea is interesting too.
Last edited by k24madness; 09-19-2017 at 12:44 AM.
#27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Looking back to my truly noob days I recall struggling with pad life and glazing on another car I own. Turns out I was not stepping on the brakes had enough. I was on em lighter and longer causing them to glaze up.
I think we can all agree it's heat glazing the pads. Why not start by adding some ducting? That maybe all you need. Won't hurt anyway. The spindle idea is interesting too.
I think we can all agree it's heat glazing the pads. Why not start by adding some ducting? That maybe all you need. Won't hurt anyway. The spindle idea is interesting too.
#28
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I did my best to take very good notes today.
First, I drove my street NA8 and checked the rotor temps with my IR gun (no brake usage). Both fronts were ~90-100F from smallest to largest diameter.
Then I drove the track car around on the street for a bit(still has plates). Same deal, no brakes... 90-100F. So I'm not sure it's dragging at all. Certainly doesn't seem like it at street speeds...
I took the track car apart and installed the SS lines that arrived on Friday. Bled the system (Motive Powerbleeder, TYP200 fluid). Checked the adjustment in the rears as well. Also found my new MC has some moisture on the O rings at the base of the resevoir. Concern?
Took the pads off on all four corners. Surprisingly, the rears were also glazed. I think at this point we can ignore the spindle as the culprit as I'm seeing the same issue all around. Of course unless I glazed these from having to brake harder and harder when the fronts overheated... seems unlikely.
Pics of rear pads before and after scuffing:
(edited out, I linked the wrong pic, will fix)
I used 80 grit sandpaper. With the G10/8 pads on the car, I went for a quick drive to bed/seat/break them in. Once the pads were warm I did some harder and harder stops, nothing too crazy and never coming to a full stop. Treated this like a bedding process like it was new. Pulled into driveway and checked rotor temps, which were 600F+ and 400F+ for front and rear respectively.
Then I pulled the pads to find this:
https://imgur.com/5kh3j9I
https://imgur.com/dFmKXtP
The rears both looked like this. Difference in photo is just wiping away the dust. Possibly high spots from sanding????
https://imgur.com/a/9lbCb
Any input? I'm really blown away that I could have glazed the pads this badly just from a few minute drive. Of course everybody I've asked has suggested I swap to Hawk DTC60s... hard to justify a 3rd set of pads in as many weeks.
Last edited by meBlaise; 09-18-2017 at 03:29 PM.
#29
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I don't actually know if any of these are likely to relate to the issue, but a couple random thoughts:
- What rotors do you use? Cheap rockauto ones? A brand name? Are they all the same, or have you tried different brands? Is it possible it's related to the rotor metallurgy?
- You are hosing it all down with brake cleaner after installing new rotors, right?
--Ian
- What rotors do you use? Cheap rockauto ones? A brand name? Are they all the same, or have you tried different brands? Is it possible it's related to the rotor metallurgy?
- You are hosing it all down with brake cleaner after installing new rotors, right?
--Ian
#30
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I don't actually know if any of these are likely to relate to the issue, but a couple random thoughts:
- What rotors do you use? Cheap rockauto ones? A brand name? Are they all the same, or have you tried different brands? Is it possible it's related to the rotor metallurgy?
- You are hosing it all down with brake cleaner after installing new rotors, right?
--Ian
- What rotors do you use? Cheap rockauto ones? A brand name? Are they all the same, or have you tried different brands? Is it possible it's related to the rotor metallurgy?
- You are hosing it all down with brake cleaner after installing new rotors, right?
--Ian
I've tried 3 diff brands of rotor. The issue doesn't appear to be metallurgy...
Yes, rotors are cleaned with the good BrakLeen stuff. Red can.
I can't believe I'm considering buying a set of Hawk DTCs for this weekend. Every bone in my logical body is screaming that this is either a different mechanical issue that I haven't been able to solve through replacing every part or I'm just incapable of driving on track pads.
#31
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just ordered a set of DTC-60s.
Words cannot express how upset I am going to be when I show up to Watkins glen with FOUR sets of brakes and still spend every minute trying to figure out why they don't work.
Also Dan @ 949 says my pads don't even look glazed. I don't even know what direction is up anymore.
Words cannot express how upset I am going to be when I show up to Watkins glen with FOUR sets of brakes and still spend every minute trying to figure out why they don't work.
Also Dan @ 949 says my pads don't even look glazed. I don't even know what direction is up anymore.
#32
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am a recent convert to GLoc, having used DTC60s the previous season and Carbotechs before that on a different car. The carbon/kevlar stuff, Carbo, GLoc, certain PFC compounds among others, are all really sensitive to contamination and transfer layer.
I would defer to Danny@Gloc or _____ @ Raybestos at this point.
#33
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
No hate for you Dan
Hope you didn't take it that way, it's just frustration combined with a lack of sleep. Yes this is keeping me up at night... it matters that much to me.
Danny just called from GLOC so I'm talking to him about it. Thanks again for all your help.
![](https://www.miataturbo.net/images/smilies/smile.gif)
Danny just called from GLOC so I'm talking to him about it. Thanks again for all your help.
Last edited by meBlaise; 09-18-2017 at 03:33 PM.
#35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
OK, so tonight I swapped the front brakes from my street car onto my track car and vice versa.
![Name: Om2X8kK.jpg
Views: 152
Size: 991.2 KB](https://www.miataturbo.net/attachments/race-prep-75/229741d1683052078-brakes-overheating-over-over-over-om2x8kk.jpg)
Don't worry, the sawzall is only for having removed the splash guards.
Interestingly, the R10s that were on the front of the track car look WAY better than they did before. I wouldn't have been worrying as much if I had seen this:
![Name: sNnaNHM.jpg
Views: 348
Size: 852.3 KB](https://www.miataturbo.net/attachments/race-prep-75/229742d1683052078-brakes-overheating-over-over-over-snnanhm.jpg)
![Name: D5E3FqT.jpg
Views: 170
Size: 914.3 KB](https://www.miataturbo.net/attachments/race-prep-75/229743d1683052078-brakes-overheating-over-over-over-d5e3fqt.jpg)
Anyway, swapped the $10 pads to my track car and the R10s to my street car. Bizarre.
-The red car used to have really hard pedal feel but not much friction on the brakes.
-The yellow car used to have pretty squishy pedal but lots of brake (except when I had my issues on track).
Now the cars are totally flipped. The yellow car feels like you're standing on a 2x4 but you can't stop very fast, and the red car has lots of squish but tons of stopping power.
That is, the feel of brakes totally moved with just the pads/rotors being swapped over. I think I'm ready to rule out simple mechanical issues on either car now and am ready to investigate whether the issue is that I don't know how to drive the car or I'm having some sort of pad/rotor friction issue.
If its the former: I've arranged for an instructor to ride and drive my car.
If its the latter: I have DTC-60s arriving tomorrow and will bring the R12s and ST43s as well.
I'm exhausted and I think I'm only feeling better because I'm so tired of thinking about this 24/7 that I'm ready to give it a break. Sigh.
![Name: Om2X8kK.jpg
Views: 152
Size: 991.2 KB](https://www.miataturbo.net/attachments/race-prep-75/229741d1683052078-brakes-overheating-over-over-over-om2x8kk.jpg)
Don't worry, the sawzall is only for having removed the splash guards.
Interestingly, the R10s that were on the front of the track car look WAY better than they did before. I wouldn't have been worrying as much if I had seen this:
![Name: sNnaNHM.jpg
Views: 348
Size: 852.3 KB](https://www.miataturbo.net/attachments/race-prep-75/229742d1683052078-brakes-overheating-over-over-over-snnanhm.jpg)
![Name: D5E3FqT.jpg
Views: 170
Size: 914.3 KB](https://www.miataturbo.net/attachments/race-prep-75/229743d1683052078-brakes-overheating-over-over-over-d5e3fqt.jpg)
Anyway, swapped the $10 pads to my track car and the R10s to my street car. Bizarre.
-The red car used to have really hard pedal feel but not much friction on the brakes.
-The yellow car used to have pretty squishy pedal but lots of brake (except when I had my issues on track).
Now the cars are totally flipped. The yellow car feels like you're standing on a 2x4 but you can't stop very fast, and the red car has lots of squish but tons of stopping power.
That is, the feel of brakes totally moved with just the pads/rotors being swapped over. I think I'm ready to rule out simple mechanical issues on either car now and am ready to investigate whether the issue is that I don't know how to drive the car or I'm having some sort of pad/rotor friction issue.
If its the former: I've arranged for an instructor to ride and drive my car.
If its the latter: I have DTC-60s arriving tomorrow and will bring the R12s and ST43s as well.
I'm exhausted and I think I'm only feeling better because I'm so tired of thinking about this 24/7 that I'm ready to give it a break. Sigh.
#36
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
nice work. these type of issues can be extremely frustrating but they are part of the game. swapping the pads was a smart idea and now you have a plan. In MY experience Hawk pads may not be the new hotness but the dtc-60 is a very good pad that can be purchased for many applications for, in some cases, around $100 . they are not super friendly on the wheels, and you may not care at this point but I suggest cleaning the wheels and spraying them with a anti dust wax product. basically wheel wax in an aerosol can. if you don't and don't clean the wheels asap you'll get deposits that are nearly impossible to remove. this is not unique to hawk but some of the fancy new pad may have ave less issue with this problem but they are costly and very particular about temps and rotors.
consider taking a step back and drive hard but use the brakes as little as possible. hit your points but let the tires do some of the braking. this does 2 things assuming you hit apexes and use all of the track and put the hurt on tires. it highlights how to carry speed and how to use all of the track. you will need to feel the tires scrub speed so a little faith is involved. Not trying to tell you about how to drive but I see students who buy good brakes and it holds them back because the cant seem to force themselves to carry more speed ( move your eyes up, look farther forward and don't hyper focus on brake markers, your car follows your hands and the hands follow the eyes.
its easy to drive a fast car fast, but you will never drive a fast car fast until you learn to drive a slow car fast. taking the time to figure out how to drive a slow car fast is critical and often overlooked. when you can chase down everyone in the group with a bone stock Mazda 6 rental car you've accomplished something. might be a little outdated, cars have gotten much faster in the last 18 years but point still valid. put **** pads on and tell the instructor about your issue. if he is any good he will show you how to make the tires howl from turn in to track out. just a suggestion if all else fails. the glen may not be the best venue for this exercise but it still applies. or you could get bigger brakes but that may not solve the problem, only introduce a new problem. one must be very aggressive when trying to get people to not over brake. then again I not the most aggressive breaker. flat spotting a tire sucks when you gotta drive home a few hours and buy new rubber.
get something set up and let a instructor with a miata drive your car. or check out qualifying times for spec miata races, a good mark to reach for. best of luck, you will get it figured out
consider taking a step back and drive hard but use the brakes as little as possible. hit your points but let the tires do some of the braking. this does 2 things assuming you hit apexes and use all of the track and put the hurt on tires. it highlights how to carry speed and how to use all of the track. you will need to feel the tires scrub speed so a little faith is involved. Not trying to tell you about how to drive but I see students who buy good brakes and it holds them back because the cant seem to force themselves to carry more speed ( move your eyes up, look farther forward and don't hyper focus on brake markers, your car follows your hands and the hands follow the eyes.
its easy to drive a fast car fast, but you will never drive a fast car fast until you learn to drive a slow car fast. taking the time to figure out how to drive a slow car fast is critical and often overlooked. when you can chase down everyone in the group with a bone stock Mazda 6 rental car you've accomplished something. might be a little outdated, cars have gotten much faster in the last 18 years but point still valid. put **** pads on and tell the instructor about your issue. if he is any good he will show you how to make the tires howl from turn in to track out. just a suggestion if all else fails. the glen may not be the best venue for this exercise but it still applies. or you could get bigger brakes but that may not solve the problem, only introduce a new problem. one must be very aggressive when trying to get people to not over brake. then again I not the most aggressive breaker. flat spotting a tire sucks when you gotta drive home a few hours and buy new rubber.
get something set up and let a instructor with a miata drive your car. or check out qualifying times for spec miata races, a good mark to reach for. best of luck, you will get it figured out
#37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
nice work. these type of issues can be extremely frustrating but they are part of the game. swapping the pads was a smart idea and now you have a plan. In MY experience Hawk pads may not be the new hotness but the dtc-60 is a very good pad that can be purchased for many applications for, in some cases, around $100 . they are not super friendly on the wheels, and you may not care at this point but I suggest cleaning the wheels and spraying them with a anti dust wax product. basically wheel wax in an aerosol can. if you don't and don't clean the wheels asap you'll get deposits that are nearly impossible to remove. this is not unique to hawk but some of the fancy new pad may have ave less issue with this problem but they are costly and very particular about temps and rotors.
consider taking a step back and drive hard but use the brakes as little as possible. hit your points but let the tires do some of the braking. this does 2 things assuming you hit apexes and use all of the track and put the hurt on tires. it highlights how to carry speed and how to use all of the track. you will need to feel the tires scrub speed so a little faith is involved. Not trying to tell you about how to drive but I see students who buy good brakes and it holds them back because the cant seem to force themselves to carry more speed ( move your eyes up, look farther forward and don't hyper focus on brake markers, your car follows your hands and the hands follow the eyes.
its easy to drive a fast car fast, but you will never drive a fast car fast until you learn to drive a slow car fast. taking the time to figure out how to drive a slow car fast is critical and often overlooked. when you can chase down everyone in the group with a bone stock Mazda 6 rental car you've accomplished something. might be a little outdated, cars have gotten much faster in the last 18 years but point still valid. put **** pads on and tell the instructor about your issue. if he is any good he will show you how to make the tires howl from turn in to track out. just a suggestion if all else fails. the glen may not be the best venue for this exercise but it still applies. or you could get bigger brakes but that may not solve the problem, only introduce a new problem. one must be very aggressive when trying to get people to not over brake. then again I not the most aggressive breaker. flat spotting a tire sucks when you gotta drive home a few hours and buy new rubber.
get something set up and let a instructor with a miata drive your car. or check out qualifying times for spec miata races, a good mark to reach for. best of luck, you will get it figured out
consider taking a step back and drive hard but use the brakes as little as possible. hit your points but let the tires do some of the braking. this does 2 things assuming you hit apexes and use all of the track and put the hurt on tires. it highlights how to carry speed and how to use all of the track. you will need to feel the tires scrub speed so a little faith is involved. Not trying to tell you about how to drive but I see students who buy good brakes and it holds them back because the cant seem to force themselves to carry more speed ( move your eyes up, look farther forward and don't hyper focus on brake markers, your car follows your hands and the hands follow the eyes.
its easy to drive a fast car fast, but you will never drive a fast car fast until you learn to drive a slow car fast. taking the time to figure out how to drive a slow car fast is critical and often overlooked. when you can chase down everyone in the group with a bone stock Mazda 6 rental car you've accomplished something. might be a little outdated, cars have gotten much faster in the last 18 years but point still valid. put **** pads on and tell the instructor about your issue. if he is any good he will show you how to make the tires howl from turn in to track out. just a suggestion if all else fails. the glen may not be the best venue for this exercise but it still applies. or you could get bigger brakes but that may not solve the problem, only introduce a new problem. one must be very aggressive when trying to get people to not over brake. then again I not the most aggressive breaker. flat spotting a tire sucks when you gotta drive home a few hours and buy new rubber.
get something set up and let a instructor with a miata drive your car. or check out qualifying times for spec miata races, a good mark to reach for. best of luck, you will get it figured out
It's also funny what you said about not using brakes, on late Sunday at Summit I was super frustrated because the brakes weren't working right so I did a few laps with using very little brake, just looking ahead and staying off of them. Bam... best lap time of weekend. Didn't even feel fast... standard 'slow is fast' feedback loop.
#38
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Was that Summit Point main? I have 4 days at that track and had no brake issues, granted I am running ducts but I'm also ~250 whp on stock rotors and gloc 10/8 pads. I was diving into turn 1 at 125 to 130mph and braking just short of the 500' mark. If you want to see a video or even my Harry's lap timer data I can share so you can compare to your driving style to see if there are any glaring differences. With that said I suck, but it's a data point none the less.
#39
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks for the kind words. You're right, this is really frustrating but clearly just part of the learning process that I was not anticipating.
It's also funny what you said about not using brakes, on late Sunday at Summit I was super frustrated because the brakes weren't working right so I did a few laps with using very little brake, just looking ahead and staying off of them. Bam... best lap time of weekend. Didn't even feel fast... standard 'slow is fast' feedback loop.
It's also funny what you said about not using brakes, on late Sunday at Summit I was super frustrated because the brakes weren't working right so I did a few laps with using very little brake, just looking ahead and staying off of them. Bam... best lap time of weekend. Didn't even feel fast... standard 'slow is fast' feedback loop.
#40
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well, spent another 2 days on track, this time at Watkins Glen. DTC-60 fronts with the G-LOC8s on the back.
First day was such a whirlwind as the track is so big and difficult to learn, so I wasn't quite up to pace until midway through Day 2.
I did again... get bad brake feel once I was really moving and was braking hard. However, I didn't lose braking force, just feel, so I kept driving.
Came into pits, let car cool and found pedal feel to still be very bad. Bled fronts - no change. Bled rears - BAM pedal feel was back. Looked at the rear pads and they're nice and shiny... fronts look perfect. I'm guessing they glazed over and boiled the fluid.
Hate to say it but I think I'm having a pad issue. I'm going to order matching hawk rear pads and I think that will solve it all. I really wonder why I've been having issues as I know lots of folks run GLOC pads with very good results.
Just very happy to have had such a good weekend!
First day was such a whirlwind as the track is so big and difficult to learn, so I wasn't quite up to pace until midway through Day 2.
I did again... get bad brake feel once I was really moving and was braking hard. However, I didn't lose braking force, just feel, so I kept driving.
Came into pits, let car cool and found pedal feel to still be very bad. Bled fronts - no change. Bled rears - BAM pedal feel was back. Looked at the rear pads and they're nice and shiny... fronts look perfect. I'm guessing they glazed over and boiled the fluid.
Hate to say it but I think I'm having a pad issue. I'm going to order matching hawk rear pads and I think that will solve it all. I really wonder why I've been having issues as I know lots of folks run GLOC pads with very good results.
Just very happy to have had such a good weekend!