Some questions about the Greddy Kit.
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hmm, I'd think a MegaSquirt would include a AFR gauge. But I've been surprised before.
And to clarify, the miata ECU (stock) is completely unmoddable. A few folks have changed the crystal frequency (by soldering a new one), there by upping the rev limit. It's an unknown factor though, the same crystal won't make the same change on two different miatas.
And to clarify, the miata ECU (stock) is completely unmoddable. A few folks have changed the crystal frequency (by soldering a new one), there by upping the rev limit. It's an unknown factor though, the same crystal won't make the same change on two different miatas.
![facepalm](https://www.miataturbo.net/images/smilies/facepalm.gif)
As far as the crystal mod... that usually leans afrs even worse... +14afrs are common at wot (NA) after the crystal mod is done to reise the revs to +7.5k rpm.
Also IN before the blown motor!!!
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
#30
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Injectors look to be unpainted.Are these off the 7M-GE supra? What would be the next plug and play step up in injector size that would provide enough flow at 5-6psi?
Looks like the 90-92 626 uses 326cc, uses the F connecter and is plug and play. Would those be adequate? And the better question is would they be easy to find?
I went to get the car smogged today and failed the 15mph test. It's running super rich at lower rpm's or so the smog tech told me. Looks like I need to get some data logging going on the megasquirt. Thanks for all your help so far.
Looks like the 90-92 626 uses 326cc, uses the F connecter and is plug and play. Would those be adequate? And the better question is would they be easy to find?
I went to get the car smogged today and failed the 15mph test. It's running super rich at lower rpm's or so the smog tech told me. Looks like I need to get some data logging going on the megasquirt. Thanks for all your help so far.
#32
Cpt. Slow
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If the 305s are as sufficient as tripple says, than don't upgrade unless you plan on upping your boost. If you're planning on doing that though, there's no point in upgrading to anything less than a 440+ injector. Between the RX7 and RX8, you have a number of 440, 450, 460, and 480(?) options available.
#37
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,760
Total Cats: 631
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hey man, RTFM. And I mean that in the kindest way. Nobody will explain to you what has already been explained in great detail in the manual.
Otherwise glad you actually have some EMS on that beast, from the start of this thread I would of assumed you were on a ghetto band-aid setup that was about to explode.
Otherwise glad you actually have some EMS on that beast, from the start of this thread I would of assumed you were on a ghetto band-aid setup that was about to explode.
#38
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I actually figured out the problem, It registered more on the boost gauge after The turbo leak was fixed. The Boost controller on the car was broken and not regulating the boost pressure so the psi after getting the turbo fixed would spike to 15psi.
I ran a vacuum line from the turbo to wastegate and the car runs great now. Took lots of Testing and messing with things but the motor runs smooth now. Thanks for everyone's help!
I ran a vacuum line from the turbo to wastegate and the car runs great now. Took lots of Testing and messing with things but the motor runs smooth now. Thanks for everyone's help!