Shanghai-S Turbo System
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I recently put a deposit for a Shanghai-S Turbo System, im now waiting for it to get delivered. I replaced fuel filter, plugs, wires, the car is up to date on all the maintenance. Is there anything else i need to change the care has 146k on it? I have new ACT clutch as well i'm waiting to see if the stock clutch will go before i replace i'm guessing will be soon. Does anyone run open wastegate dump?
#5
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
From pretty much EVERYTHING I have seen, you can at least multiply that very optimistic estimate by 3 or 4 times as much. Mid August is only 5-6 weeks away, I say more like September-ish, maybe October. At least prepare yourself for 8 weeks, just to not get your hopes up.
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It took them a little while, but the wait was worth it. They were more than helpful when I failed to mention i had a 99 block. They gave me new parts at no charge for my mistake. I would get a megasquirt if it is in your budget. When i ordered mine, i just got the megasquirt instead of the fpr, and it was only like 579 more. You might try to find a used ic kit or piece one together too while your waiting.
#12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I recently put a deposit for a Shanghai-S Turbo System, im now waiting for it to get delivered. I replaced fuel filter, plugs, wires, the car is up to date on all the maintenance. Is there anything else i need to change the care has 146k on it? I have new ACT clutch as well i'm waiting to see if the stock clutch will go before i replace i'm guessing will be soon. Does anyone run open wastegate dump?
#16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Stephanie
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The OP orders his system the end of June and you suggest the middle of August. Based on your 4 week lead time? And non standard parts? Call me crazy, but I just don't see the connection here.
Stephanie