Replacement turbo
#1
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Replacement turbo
I purchased a spare greddy manifold to put in reserve in case mine decides to crack.
But then it dawned on me that I have a spare manifold, a spare downpipe, a greddy cross over tube, and a family member who owns a miata. Where can I get a 15g--Is it a factory turbo for something? Is that the only turbo that will work with the greddy manifold and greddy downpipe?
Thanks
But then it dawned on me that I have a spare manifold, a spare downpipe, a greddy cross over tube, and a family member who owns a miata. Where can I get a 15g--Is it a factory turbo for something? Is that the only turbo that will work with the greddy manifold and greddy downpipe?
Thanks
#2
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
the other option is,
I pull my 15g off and replace it with a different turbo. I am planning on purchasing a BEGi downpipe anyway. What turbo should I look at to fit my greddy manifold?
I pull my 15g off and replace it with a different turbo. I am planning on purchasing a BEGi downpipe anyway. What turbo should I look at to fit my greddy manifold?
#5
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
how about NO.
I'll have what amounts to a complete greddy system minus the turbo. I was hoping that the 15g came on something, that I could pick one up cheap, and rebuild it. That would give me a second greddy kit for the cost of a turbo.
My budget for this project is $285 for a new downpipe + $80 for a used turbo + $50 for a rebuild kit.
My goal is to have a second kit to give to a family member, not to sell what I have, spend money, and still have 1 turbo kit.
I'll have what amounts to a complete greddy system minus the turbo. I was hoping that the 15g came on something, that I could pick one up cheap, and rebuild it. That would give me a second greddy kit for the cost of a turbo.
My budget for this project is $285 for a new downpipe + $80 for a used turbo + $50 for a rebuild kit.
My goal is to have a second kit to give to a family member, not to sell what I have, spend money, and still have 1 turbo kit.
#6
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
are you trying to fight?!
by **** I meant stuff, wasn't trying to say what you had sucked btw.
i believe it has the same footprint as the sr20 t25s and t28s, but the exhaust side might be different. modify the DP slightly and it should work.
by **** I meant stuff, wasn't trying to say what you had sucked btw.
i believe it has the same footprint as the sr20 t25s and t28s, but the exhaust side might be different. modify the DP slightly and it should work.
#7
Junior Member
iTrader: (1)
Join Date: Oct 2004
Location: Haarlem ,the Netherlands
Posts: 453
Total Cats: 0
Just get a t25 and a flange to weld on the dp...
Replacements td04h are only on greddy sets (miata, honda civic/crx)
There are replacement turbo's but that's more than your budget...(td40 on ebay)http://cgi.ebay.nl/turbina-T28-T25-t...QQcmdZViewItem
Replacements td04h are only on greddy sets (miata, honda civic/crx)
There are replacement turbo's but that's more than your budget...(td40 on ebay)http://cgi.ebay.nl/turbina-T28-T25-t...QQcmdZViewItem
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM