real hks kit of 1.8
#21
I'm Miserable!
Thread Starter
iTrader: (5)
Join Date: Sep 2005
Location: SLC, Utah
Posts: 1,589
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
When i had my gti, i thought about doing this, since the dipstick went straight into a rubber fitting on the side of the pan.
Might have to see if i can figure something out for the miata this weekend... could cut the dipstick tube, flare it, and put a brass T in there... but would it be able to flow enough oil?
Might have to see if i can figure something out for the miata this weekend... could cut the dipstick tube, flare it, and put a brass T in there... but would it be able to flow enough oil?
#23
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
use a spring on the dipstick end to keep it in place and sealed
the DSM guys running BOOST often do this
http://www.dsmtuners.com/forums/151056565-post307.html
https://secure.buschurracing.com/cat...c94a7d420ab4b2
the DSM guys running BOOST often do this
http://www.dsmtuners.com/forums/151056565-post307.html
https://secure.buschurracing.com/cat...c94a7d420ab4b2
talk about over engineering, a small piece of 5/16 fuel line and two spiral clamps will hold it in place.
as far as the tube being used for the return....
if this is your oil flow at idle with an restrictor on a -3an line:
there's no chance in hell I'd do that.
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM