need some help picking a kit
#1
need some help picking a kit
First off this is for my buddy's car a 1990 1.6 car that has the 1.8 rear end and axles in it. I am currently building the car for him. He is looking to spend 3-4 grand on just the kit and then also buy the MS PNP. He wants a good clean 12 psi. I will be porting the head and adding a set of cams. Thank you for the help.
#16
like I said I primarily work on motors that are at least 5 L they are much less sensitive to turbo size. I know how to do all the work how to build the engine and I have turboed many engines just not as small as the miata motor. I am a smart enough man to know that I do not know every thing and to ask for help when I'm not absolutely sure. If it was a going on a stock motor I wouldn't be asking for help as I would just use a previously proven set up.
#17
This is a stock motor, though. Or at least judging by what you said in the first post.
If he wants 300whp reliably, he'll need a built bottom end, which comes with a whole 'nother set of decisions to make.
The 2560 won't make 300whp. 2860 is the bare minimum and you might want to look into fancier options.
If you're building a motor anyways, using a 1.6 is full retard status, though.
If he wants 300whp reliably, he'll need a built bottom end, which comes with a whole 'nother set of decisions to make.
The 2560 won't make 300whp. 2860 is the bare minimum and you might want to look into fancier options.
If you're building a motor anyways, using a 1.6 is full retard status, though.