My Greddy Problem
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Guam (U.S Terr.)
Posts: 786
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
so i finally took my miata with the greddy kit out for a drive. the boost gauge is hooked up (the vacuum was on the throttle body ) when i full throttled the boost gauge didnt read past 0 psi and the vacuum read 15. i made sure all the clamps were tightened. there is no intercooler but a made a cross pipe out of aluminum pipes i dont have pic right now. but just used your imagination
90 miata
greddy 1.6
no intercooler
stock injectors
ill take a pic soon if needed
90 miata
greddy 1.6
no intercooler
stock injectors
ill take a pic soon if needed
#4
Senior Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Guam (U.S Terr.)
Posts: 786
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
i was suppose to have an intercooler set up. but i didnt have enough pipes so i just made a crossover with them. i think it makes the intake temp cooler then that plastic ****
#8
Senior Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Guam (U.S Terr.)
Posts: 786
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
heres the pics of the set up and where i vacuumed the guage at
this is the vacuum source
DSC00671-1.jpg
and here what the set up looks like
DSC00672.jpg
DSC00673.jpg
DSC00674.jpg
this is the vacuum source
DSC00671-1.jpg
and here what the set up looks like
DSC00672.jpg
DSC00673.jpg
DSC00674.jpg
#11
Senior Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Guam (U.S Terr.)
Posts: 786
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
you wont believe how i did the fan its really embarrassing. i tried wiring the fan normally except i couldn't get any power off the yellow wire and all i had was an hour before i had to leave the shop so i took like 20ft of wire and ran it threw the car all the way to the battery. OMFG i know. the guage is not kinked i guess its a bad gauge (son of a bitch) but the car home now so i can take my time on the touch ups and re wiring ****
#12
Senior Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Guam (U.S Terr.)
Posts: 786
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This is the history of the car. just so everyone that reads this. I crashed my NA miata the Week After i ordered my GReddy
From this
MOV00094001_0001.jpg
TO THIS
DSC00570.jpg
then bought this body for $200
DSC00576.jpg
and started transfering everything over from one miata to the new one in the jungle
DSC00611.jpg
pulled out the shitty old motor from that $200 car
DSC00594.jpg
after the jungle i got the car towed to my uncle body shop and he let me work in there for like 2 months then i had to leave.
heres a list of everything i swapped over
-doors
-dash with ignition switch(so i can keep the same key)
-full interior (carpet and seats and hand brake)
- my soft top
-a fender
-trunk lid
-key lock for the truck lid
-motor,trans,diff, drive shaft
-thank god i didnt have to drop the tank
-fuel pump
-lights
Heres some pics i found
this is when i first bought it when it had this red soft top
Picture001.jpg
then i bought the black one
DSC00506.jpg
Picture005.jpg
Picture006.jpg
Picture002.jpg
From this
MOV00094001_0001.jpg
TO THIS
DSC00570.jpg
then bought this body for $200
DSC00576.jpg
and started transfering everything over from one miata to the new one in the jungle
DSC00611.jpg
pulled out the shitty old motor from that $200 car
DSC00594.jpg
after the jungle i got the car towed to my uncle body shop and he let me work in there for like 2 months then i had to leave.
heres a list of everything i swapped over
-doors
-dash with ignition switch(so i can keep the same key)
-full interior (carpet and seats and hand brake)
- my soft top
-a fender
-trunk lid
-key lock for the truck lid
-motor,trans,diff, drive shaft
-thank god i didnt have to drop the tank
-fuel pump
-lights
Heres some pics i found
this is when i first bought it when it had this red soft top
Picture001.jpg
then i bought the black one
DSC00506.jpg
Picture005.jpg
Picture006.jpg
Picture002.jpg