And on his 817th post, he said 'let there be boost'
#1
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (24)
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,709
Total Cats: 15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
And there was boost, and it was good. To the tune of 207whp at 8(?) psi on a Dynapack. (Setup is in my signature)
There's allot of tuning left to do, and I will be pestering all your smart ******* for help. My mechanic builds Spec Miata's but hasn't done much boost tuning, so it was a learning experience all around.
But the important thing is the car runs, It made the 140 mile trip back home without incident, and it's back in my driveway, so I'm a happy fella.
I'm off to Watkins Glen in the morning, but I should have some data logs from the dyno on Monday, and I'll start doing some street tuning next week.
Many thanks to this forum. It made the build allot easier.
C
There's allot of tuning left to do, and I will be pestering all your smart ******* for help. My mechanic builds Spec Miata's but hasn't done much boost tuning, so it was a learning experience all around.
But the important thing is the car runs, It made the 140 mile trip back home without incident, and it's back in my driveway, so I'm a happy fella.
I'm off to Watkins Glen in the morning, but I should have some data logs from the dyno on Monday, and I'll start doing some street tuning next week.
Many thanks to this forum. It made the build allot easier.
C
#16
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (24)
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,709
Total Cats: 15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It's a used GT2560R Voodoo kit, the newer one with the nice silicon intercooler pipes, and a MSPNP, with RX7 550's.
I'll snap some pics eventually. Engine bay needs tidying up.
Yes, bone stock 110k engine.
I drove it home from my mecanics shop on Wednesday, and it's been sitting since then. It's got a bad case of boost creep, wherein it goes right to 5psi, then creeps to about 10 at high rpm. I only went WOT on the highway in 5th, and 5psi is nothing to write home about. I have the new wastegate setup on order from FM. A steady 12psi should transform this thing.![wink](https://www.miataturbo.net/images/smilies/wink.gif)
C
I'll snap some pics eventually. Engine bay needs tidying up.
Yes, bone stock 110k engine.
I drove it home from my mecanics shop on Wednesday, and it's been sitting since then. It's got a bad case of boost creep, wherein it goes right to 5psi, then creeps to about 10 at high rpm. I only went WOT on the highway in 5th, and 5psi is nothing to write home about. I have the new wastegate setup on order from FM. A steady 12psi should transform this thing.
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
C
#17
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,340
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If that doesn't work, you may simply be shooting for too little boost relative to your wastegate port.
#18
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (24)
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,709
Total Cats: 15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
When I called Flyin Miata, I was explaining that I had boost creep and was rattling off the particulars of my setup. The tech stopped me, and asked if I had the wastegate with the adjustable rod. When I told him I did, he explained that they've updated the design, because that setup doesn't have enough stroke to open the flapper fully. I'm hoping that's the case, and the new WG & bracket assy will resolve my issue. The parts should be here Friday, so expect either a
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)
![Loser](https://www.miataturbo.net/images/smilies/sign0058.gif)
C
#19
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,340
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well, 8 PSI isn't much on a 2560. The less boost you're trying to achieve, the more gas has to flow out through the wastegate. Some people have found that by porting the wastegate path (much like porting a head) this problem is reduced or eliminated.
Sounds entirely plausible. FM would know better than anyone this history on those kits. The practical effect of a too-short stroke on the WG actuator would be indistinguishable from a restrictive wastegate flow path.
When I called Flyin Miata, I was explaining that I had boost creep and was rattling off the particulars of my setup. The tech stopped me, and asked if I had the wastegate with the adjustable rod. When I told him I did, he explained that they've updated the design
#20
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (24)
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,709
Total Cats: 15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I want to see my boost gauge go straight to 9 or 10 psi and stay flat. Once that's achieved I'll either try and preload it for 12, or install my Profec.
I'm already signed up for NHMS at the end of the month, and I'm thinking 9psi would be a safe starting point for running the car at the track.
C