Greddy Electronic Boost Guage
#5
Gauge installed but new issue.
Installed the Gauge tonight after work. Used the radio harness for the power and there was a gromet in the firewall for the pressure sensor wire. Installed it in one of the center air vents.
The guage reads boost in PSI so don't have to deal with that bar bs.
But on a sour note, the CEL has been coming on an I suspect cooling issue as the CEL comes on once temp is past half on the gauge. Soooo, I got a new thermostat to change tonight. When I went to take the cover off the stat housing the tops of the bolts came off, so more drilling to do.
Eventually something will go right.
Blade
The guage reads boost in PSI so don't have to deal with that bar bs.
But on a sour note, the CEL has been coming on an I suspect cooling issue as the CEL comes on once temp is past half on the gauge. Soooo, I got a new thermostat to change tonight. When I went to take the cover off the stat housing the tops of the bolts came off, so more drilling to do.
Eventually something will go right.
Blade
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM