EPIC nuts/studs loosening thread (reposting stupid stuff without reading = warning)
#142
Elite Member
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The stage 8s have them tight. They did not loosen at all since they couldn't have turned to become loose. I am thinking the stud backed out of the mani and nut to the point of the little clip that falls over the nut couldn't hold the nut in place anymore. All happening in a 20 min session.
#143
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So you didn't do a few street heat cycles and re-tighten before hitting the track?
Seems to me the studs "break in" and stretch in the first few street heat cycles. I think they need to be re-tightened a few times after installation regardless of the use of stage 8 or safety wire.
If this is such a huge problem everyone would have loosening nuts. However some people don't. And no, they're not all slow. A buddy is an ex motorcycle racer and is pretty darn fast at Thunderhill and he hasn't had this persistent problem. This is the whole point of this thread, to try and figure out the differences between loosening and non loosening setups.
Seems to me the studs "break in" and stretch in the first few street heat cycles. I think they need to be re-tightened a few times after installation regardless of the use of stage 8 or safety wire.
If this is such a huge problem everyone would have loosening nuts. However some people don't. And no, they're not all slow. A buddy is an ex motorcycle racer and is pretty darn fast at Thunderhill and he hasn't had this persistent problem. This is the whole point of this thread, to try and figure out the differences between loosening and non loosening setups.
#144
Elite Member
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So you didn't do a few street heat cycles and re-tighten before hitting the track?
Seems to me the studs "break in" and stretch in the first few street heat cycles. I think they need to be re-tightened a few times after installation regardless of the use of stage 8 or safety wire.
Seems to me the studs "break in" and stretch in the first few street heat cycles. I think they need to be re-tightened a few times after installation regardless of the use of stage 8 or safety wire.
McMaster-Carr
I don't believe they stretched at all, however i have not taken them out and inspected them either so i could be wrong.
What setup does your friend have?
#145
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I chose to go with the resbond and stage-8 nuts so I could retighten easily and see if that fixes it. Soon the truth will liberate me from pain, and most likely money from my checking account. However...I'd love to ***** pics of v-band/ss everything.
#147
Elite Member
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This could be a good experiment. You guys take the resbond/stud/Stage-8 nut route, and I'll take the Stage-8 bolt only route, and see what works, pending some track day testing.
#154
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The guys that are driving 200whp cars and X sec under SM lap records can't be used to validate "turbo held on with two zip ties and a band aid and he's/I've never had a problem".
I'm suspicious of sources that offer solutions and have never been near a Miata that will beat an SM lap record, let alone built and driven one.
I get customer all the time that tell me they're making 250whp and never overheated on the track. Running stock 1.6 brakes and never faded. 205 street tires are "plenty of grip". I won't make any friends for saying it but those guys are just slow. Often 10-15 sec behind SM records so I tend to qualify all of their proposed fixes by nailing down just how much heat they're putting into the car.
A wingless 2500lb (with driver) streetable Miata with 225/45/15 Hoosier R6's at T hill w/cyclone is capable of about 2:01~2:02. Big difference in the thrashing a 2:12 car will receive.
/tirade
p.s. Double espresso in the evening does that to me
__________________
#155
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
IIRC he did under 2:10 years ago when the SM record at THill was ~2:09. I called him today and he did have loosening nuts and his solution was just "tighten the **** out of it". His old car felt around 220-230 hp - 15 psi 1.6 with WI and somewhat aggressive timing.
Sav and emilio, let's say for the moment that you 2 guys are "special" and that no studs and nuts will hold turbos on for you. But then for the rest of us mere mortals (which I suspect includes Hustler) there may be a simple solution to this problem. Such as pretorquing the studs using moly lube, and re-tightening the nuts a few times before hitting the track.
I called ARP to ask them about this and one of their guys gave a laughable response which I won't share because there are too many doubters in this thread. I'm not sure if I even want to try it as there are several other ideas in this thread I'd rather try.
Now, which of you poor bastards with loosening nuts pre-torqued the studs AND re-tightened the nuts after a few heat cycles before hitting the track?
I find it a bit hard to believe that this problem is so pervasive, yet FM for one, seem to find that Nordlocks are good enough for their cars on the track.
Sav and emilio, let's say for the moment that you 2 guys are "special" and that no studs and nuts will hold turbos on for you. But then for the rest of us mere mortals (which I suspect includes Hustler) there may be a simple solution to this problem. Such as pretorquing the studs using moly lube, and re-tightening the nuts a few times before hitting the track.
I called ARP to ask them about this and one of their guys gave a laughable response which I won't share because there are too many doubters in this thread. I'm not sure if I even want to try it as there are several other ideas in this thread I'd rather try.
Now, which of you poor bastards with loosening nuts pre-torqued the studs AND re-tightened the nuts after a few heat cycles before hitting the track?
I find it a bit hard to believe that this problem is so pervasive, yet FM for one, seem to find that Nordlocks are good enough for their cars on the track.
#156
Former Vendor
iTrader: (9)
Join Date: Jan 2008
Location: Bay Area, California
Posts: 929
Total Cats: 9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
IIRC he did under 2:10 years ago when the SM record at THill was ~2:09. I called him today and he did have loosening nuts and his solution was just "tighten the **** out of it". His old car felt around 220-230 hp - 15 psi 1.6 with WI and somewhat aggressive timing.
I find it a bit hard to believe that this problem is so pervasive, yet FM for one, seem to find that Nordlocks are good enough for their cars on the track.
I find it a bit hard to believe that this problem is so pervasive, yet FM for one, seem to find that Nordlocks are good enough for their cars on the track.
I don't find that hard to believe..... FM's cars aren't fast. Plain and simple.
#157
Cpt. Slow
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
yes, the track dog was all show and no go....
Although they did just start selling stage 8 hardware. And just a few dozen posts ago in this thread Keith said they're developing an even better product. So if Nordlocks are "good enough", why are the developing "better" products?
Aren't we all re-torquing the studs/nuts/bolts after a few heat cycles since they're coming loose? They're used at the track (aka heat cycled), where they come loose, and we're tightening them before the next track day. I don't think we're not all putting new hardware in once it loosens. I use bolts, and have had the same hardware in the manifold for a while, re tightening after each track day. I could do it during the track day, as the last session or two I can tell I've lost some performance and can hear the leak, but it's generally too much of a pain and not enough of a gain for me to do it. I've been so f'ing hot in my car the last two track days that I've gone home after the 3rd session, but that's with full 30 minute sessions running the heater full blast.
Although they did just start selling stage 8 hardware. And just a few dozen posts ago in this thread Keith said they're developing an even better product. So if Nordlocks are "good enough", why are the developing "better" products?
Aren't we all re-torquing the studs/nuts/bolts after a few heat cycles since they're coming loose? They're used at the track (aka heat cycled), where they come loose, and we're tightening them before the next track day. I don't think we're not all putting new hardware in once it loosens. I use bolts, and have had the same hardware in the manifold for a while, re tightening after each track day. I could do it during the track day, as the last session or two I can tell I've lost some performance and can hear the leak, but it's generally too much of a pain and not enough of a gain for me to do it. I've been so f'ing hot in my car the last two track days that I've gone home after the 3rd session, but that's with full 30 minute sessions running the heater full blast.
#158
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
No offense to Keith and Bill, but to be quite honest, their cars are slow. The only fast FM car that I know of is Sonny (VagaXT) - and he has the same ******* issues.
#159
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I called ARP to ask them about this and one of their guys gave a laughable response which I won't share because there are too many doubters in this thread. I'm not sure if I even want to try it as there are several other ideas in this thread I'd rather try.
Now, which of you poor bastards with loosening nuts pre-torqued the studs AND re-tightened the nuts after a few heat cycles before hitting the track?
I find it a bit hard to believe that this problem is so pervasive, yet FM for one, seem to find that Nordlocks are good enough for their cars on the track.
Now, which of you poor bastards with loosening nuts pre-torqued the studs AND re-tightened the nuts after a few heat cycles before hitting the track?
I find it a bit hard to believe that this problem is so pervasive, yet FM for one, seem to find that Nordlocks are good enough for their cars on the track.
and I'm sorry, but if you're in a FI miata in any capacity and you're not turning laps faster than the SM record, you're not a man. How the hell do you take yourself seriously if a 140whp gay-dude is ***-raping you at 1/2 the power? I don't care, you're a power-bottom.
Hopefully I become a man in the next few weeks, but until then I plan on running a 1:32 in Johnfag's car at Hallett next weekend.
#160
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Oh puhleeze you guys with all your smack talk. Were you guys bullied when you were little? Does it make you feel more like a man when you say "I outlapped an LMP2 car even though my turbo fell out as I was passing him in the first corner"?
Hustler I know that some men who outwardly act gay-phobic are actually compensating for inner gay demons.![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
Sav, what you said illustrates one of my earlier points. You say one or your setups was fine at Thill then started loosening at WS big track. I said that the track will be bigger determinant of EGT than the driver.
Regarding your safety wired setup - did you retorque it before wiring?
So. Which of you mortal drivers have lots of issues noticed some tracks loosen nuts more than others?
BTW I realized my friend has always been using water injection. Maybe that helps.
Hustler I know that some men who outwardly act gay-phobic are actually compensating for inner gay demons.
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
Sav, what you said illustrates one of my earlier points. You say one or your setups was fine at Thill then started loosening at WS big track. I said that the track will be bigger determinant of EGT than the driver.
Regarding your safety wired setup - did you retorque it before wiring?
So. Which of you mortal drivers have lots of issues noticed some tracks loosen nuts more than others?
BTW I realized my friend has always been using water injection. Maybe that helps.