bye bye engine!!!
#1
Senior Member
Thread Starter
iTrader: (8)
Join Date: Aug 2006
Location: Springfield, IL
Posts: 1,012
Total Cats: 0
![Angry](https://www.miataturbo.net/images/icons/icon8.gif)
Okay here it goes so I went to get my haircut. When I left I was just cruising down the road out of boost and the car dies all gauges I have read good A/F, Oil Press., temp gauge. and lose power steering and ABS, I look back and looks like a white smoke bomb out the back and Then I knew It wasn't starting again so I had to get it towed $52
big waste of money. But heres where I stand now I'm pretty low on cash and Im pretty sure its the head gasket by the white smoke Heres what I need help with whats the cheapest way to diagnose and fix my problem! thanks guys I tried with the punctuation but probably isn't right also on a sidenote when I try to crank now theres no oil press. what does that mean exactly? I'm a noob when it comes to engine building only thing I've ever rebuilt would be lawn mower engines in school?
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
#8
I'm Miserable!
iTrader: (5)
Join Date: Dec 2006
Location: jacksonville, fl
Posts: 1,711
Total Cats: -1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
pull your plugs and see what they look like. that will tell you a lot. also check your timing belt, by all of the sudden just dieing while cruiseing and now no oil pressure while cranking, you could have just snaped the timing belt. and thats an easy and cheap fix. but FIND OUT WHATS WRONG BEFORE BUYING ANYTHING! you dont need to waste money on stuff that doesnt need replacing.
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If it's not the torque on the head bolts, you are going to need to perform a leak down test.
Basically what that is, pressurize the individual cylinders with compressed air (make sure the valves are closed and the piston is at TDC) and see where the air leaks out of. You can buy a leak down tester at Harbor Freight stores for about $40. You are going to need an air compressor for this though.
Tony
Basically what that is, pressurize the individual cylinders with compressed air (make sure the valves are closed and the piston is at TDC) and see where the air leaks out of. You can buy a leak down tester at Harbor Freight stores for about $40. You are going to need an air compressor for this though.
Tony
#12
Senior Member
Thread Starter
iTrader: (8)
Join Date: Aug 2006
Location: Springfield, IL
Posts: 1,012
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
UPDATE ![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
I went out to try to start it and what do you know it started right up???? WTF is goin on?? why would I have a smoke screen of white smoke behind my car and it stall and not start again???
the only thing i noticed when checking the oil and coolant was that it was a little low but not really do I have a leaky HG it seems to idle fine no smoke or leaks or smells what should I do???
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)