Bolt on kit complete?
#1
Bolt on kit complete?
Hi all, decided against an engine swap in my 92 1.6 Eunos - didnt make an awful lot of sense really.
Thought a cheap option would be the basic greddy kit. I have found one being sold used. I alwasy think buying car bits second hand can be a big mistake, if you find somethings gone, rusty or missing your in trouble.
Could anyone with the knowledge look over whats included and tell me if it is *complete* i wasn sure why it would include parts that were not in the original kit - are they subsitutues?
Turbo (greddy)
Manifold (greddy)
Downpipe (greddy),
New Walbro Fuel Pump (for mx5),
Malpassi Fuel Regulator,
XS Boost Controller (used),
Xs Blow Off Valve (used),
Another Boost controller (used),
Intake Pipe (greddy),
Intake Pipe (not greddy),
Roll of Insulated tape for downpipe,
Air Filter Adapter (used),
Vacuum Hose Kit
Thanks very much
Thought a cheap option would be the basic greddy kit. I have found one being sold used. I alwasy think buying car bits second hand can be a big mistake, if you find somethings gone, rusty or missing your in trouble.
Could anyone with the knowledge look over whats included and tell me if it is *complete* i wasn sure why it would include parts that were not in the original kit - are they subsitutues?
Turbo (greddy)
Manifold (greddy)
Downpipe (greddy),
New Walbro Fuel Pump (for mx5),
Malpassi Fuel Regulator,
XS Boost Controller (used),
Xs Blow Off Valve (used),
Another Boost controller (used),
Intake Pipe (greddy),
Intake Pipe (not greddy),
Roll of Insulated tape for downpipe,
Air Filter Adapter (used),
Vacuum Hose Kit
Thanks very much
#3
http://cgi.ebay.com/ebaymotors/miata...ayphotohosting
There are a dozen different models of Walbro that will drop in to the Miata fuel pump housing... which Walbro is it? The original FPR was a Vortech unit, I've never heard of Malpassi, but it looks like a typical disc-type FPR.
Here's a pic of the kit off the Greddy website.
Manifold
Turbo
Downpipe
2x Intake pipes
Vortech FPR
Filter
Oil Feed line+Hardware
Oil Drain line/Flange
2x Vaccum lines
3x Silicone Hoses+Worm Clamps
IMHO, it's not worth $500 though... $750 is absurd. I've seen much more complete kits, including an intercooler, injectors, MSD, and other equipment go for $750. Plus, you did see that it's located in Puerto Rico, right... shipping is going to be around $200 I would think. My advice, pass.
There are a dozen different models of Walbro that will drop in to the Miata fuel pump housing... which Walbro is it? The original FPR was a Vortech unit, I've never heard of Malpassi, but it looks like a typical disc-type FPR.
Here's a pic of the kit off the Greddy website.
Manifold
Turbo
Downpipe
2x Intake pipes
Vortech FPR
Filter
Oil Feed line+Hardware
Oil Drain line/Flange
2x Vaccum lines
3x Silicone Hoses+Worm Clamps
IMHO, it's not worth $500 though... $750 is absurd. I've seen much more complete kits, including an intercooler, injectors, MSD, and other equipment go for $750. Plus, you did see that it's located in Puerto Rico, right... shipping is going to be around $200 I would think. My advice, pass.
Last edited by samnavy; 08-01-2007 at 09:47 PM.
#5
http://cgi.ebay.com/ebaymotors/miata...ayphotohosting
There are a dozen different models of Walbro that will drop in to the Miata fuel pump housing... which Walbro is it? The original FPR was a Vortech unit, I've never heard of Malpassi, but it looks like a typical disc-type FPR.
Here's a pic of the kit off the Greddy website.
Manifold
Turbo
Downpipe
2x Intake pipes
Vortech FPR
Filter
Oil Feed line+Hardware
Oil Drain line/Flange
2x Vaccum lines
3x Silicone Hoses+Worm Clamps
IMHO, it's not worth $500 though... $750 is absurd. I've seen much more complete kits, including an intercooler, injectors, MSD, and other equipment go for $750. Plus, you did see that it's located in Puerto Rico, right... shipping is going to be around $200 I would think. My advice, pass.
There are a dozen different models of Walbro that will drop in to the Miata fuel pump housing... which Walbro is it? The original FPR was a Vortech unit, I've never heard of Malpassi, but it looks like a typical disc-type FPR.
Here's a pic of the kit off the Greddy website.
Manifold
Turbo
Downpipe
2x Intake pipes
Vortech FPR
Filter
Oil Feed line+Hardware
Oil Drain line/Flange
2x Vaccum lines
3x Silicone Hoses+Worm Clamps
IMHO, it's not worth $500 though... $750 is absurd. I've seen much more complete kits, including an intercooler, injectors, MSD, and other equipment go for $750. Plus, you did see that it's located in Puerto Rico, right... shipping is going to be around $200 I would think. My advice, pass.
does greddy kit bolt on and run? how many psi/horses i am looking at?
or i need some other things to complete?
Last edited by rotor reaction; 07-08-2007 at 02:12 AM.
Thread
Thread Starter
Forum
Replies
Last Post