Sequential Fuel Injection 9495
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am having problems trying to wire my up my diypnp ver 1.5 board for sequential fuel injection. I cannot find a pin out diagram for the 94-95 Miata.
I can only find 9697 which shows as:
Batch: INJ1 4U,4W
INJ2 4V, 4X
Seq: INJ1 4U
INJ2 4W
INJ3 4V
INJ4 4X
My best guess for the 9495 then would be:
Batch: INJ1 4Y, 4Z
INJ2 4U, 4Z
Seq: INJ1 4Y
INJ2 4Z
INJ3 4U
INJ4 4Z
But I really don't want to guess, If anyone has a pin out for the injectors I would greatly appreciate it.
Thanks in advance.
I can only find 9697 which shows as:
Batch: INJ1 4U,4W
INJ2 4V, 4X
Seq: INJ1 4U
INJ2 4W
INJ3 4V
INJ4 4X
My best guess for the 9495 then would be:
Batch: INJ1 4Y, 4Z
INJ2 4U, 4Z
Seq: INJ1 4Y
INJ2 4Z
INJ3 4U
INJ4 4Z
But I really don't want to guess, If anyone has a pin out for the injectors I would greatly appreciate it.
Thanks in advance.
#5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
After getting a reply from diyautotune:
"The injectors would wire corespondent to engine firing order. If your firing order is the typical 1-3-4-2, then injector 1 output would wire to cylinder 1, injector 2 output to cylinder 3, and so on."
Based on this, my new plan is
MS Board_____MX5_______MS
INJ1_________2U(INJ1)___4U
INJ2_________2Y(INJ3)___4Y
INJ3_________2Z(INJ4)___4Z
INJ4_________2V(INJ2)___4V
"The injectors would wire corespondent to engine firing order. If your firing order is the typical 1-3-4-2, then injector 1 output would wire to cylinder 1, injector 2 output to cylinder 3, and so on."
Based on this, my new plan is
MS Board_____MX5_______MS
INJ1_________2U(INJ1)___4U
INJ2_________2Y(INJ3)___4Y
INJ3_________2Z(INJ4)___4Z
INJ4_________2V(INJ2)___4V
#8
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I mostly followed:Mega Miata: February 2015
I believe the writer is a member on this forum, but I can't remember the name.
I believe the writer is a member on this forum, but I can't remember the name.