mspnp resets
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Palmdale, CA
Posts: 57
Total Cats: 4
mspnp resets
Sorry for the noob issues. I installed mspnp in my 97 and got the car running on the base map without MAF. Car idles smooth and seems to drive alright although a bit lean if the MT AFR guage is at all accurate when set for narrow band. My first concern is the high reset count. From what I've read this is most likely a ground issue. What grounds am I supposed to check? I haven't touched any grounds during the install. The other thing to check from what I've read is plug gaps. I'll do this as soon as engine cools.
thanks
thanks
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Palmdale, CA
Posts: 57
Total Cats: 4
Hope this loads. I suck at uploading things. I also swaped some guages and noticed while driving in to work today that my fuel pressure is only at 15-16psi. I'll change the fuel filter tonight, but could this also be caused by a bad ground for the fuel pump?
Last edited by Scooter25; 06-30-2010 at 03:04 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM