Autotune always reads "Out of window" or "0% correction"
#1
Autotune always reads "Out of window" or "0% correction"
Is there anything to autotune more than enabling the feature? Whenever i enable it, it seems to make no changes, it's almost constantly out of window, and the rare times it does go into window, it's never changed anything that i can tell.
Can't find any documentation or instruction on this feature, please help.
Can't find any documentation or instruction on this feature, please help.
#2
The way to adjust the window is a bit complicated. Go into your project's folder. Open the mtCfg folder inside this directory. There's a file in there called custom.ini. Open it with Notepad or a similar text editor. You'll see a block that begins with [AutoTune] and a couple of computer-speak if-then statements. You want the block that has an if statement that notes it's for MSnS-E. Inside that block, you'll see a set of notes like this:
xLimits = 1200, 5000
yLimits = 20, 90
zLimits = 10, 150
The xLimits control the RPM range where AutoTune works, and the yLimits control the range of MAP values where it works. The zLimits controls what it can set the VE table to. Adjust these numbers to put the AutoTune range where you want it to be.
xLimits = 1200, 5000
yLimits = 20, 90
zLimits = 10, 150
The xLimits control the RPM range where AutoTune works, and the yLimits control the range of MAP values where it works. The zLimits controls what it can set the VE table to. Adjust these numbers to put the AutoTune range where you want it to be.
#12
4 Warnings:
Warning: MSQ Units Mismatch for maeRates4! kPa/s found in current configuration, ms found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for taeRates4! Volt/s found in current configuration, ms found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for afrBins1! Volts found in current configuration, AFR found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for afrBins2! Volts found in current configuration, AFR found in MSQ, values were not converted to new units.
These are the errors.
Warning: MSQ Units Mismatch for maeRates4! kPa/s found in current configuration, ms found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for taeRates4! Volt/s found in current configuration, ms found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for afrBins1! Volts found in current configuration, AFR found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for afrBins2! Volts found in current configuration, AFR found in MSQ, values were not converted to new units.
These are the errors.
#15
So tried tuning with TunerStudio today, but it's telling me the O2 Filter is out of range.
Looks like it's setup for a narrowband, but the EGO control looks like it's setup correctly.
If this were MegaTune i'd guess the config file needs to be set, but i don't see any option to play with the config in TunerStudio.
Any tips?
Looks like it's setup for a narrowband, but the EGO control looks like it's setup correctly.
If this were MegaTune i'd guess the config file needs to be set, but i don't see any option to play with the config in TunerStudio.
Any tips?