Wrecked '90 partout
#1
Senior Member
Thread Starter
iTrader: (6)
Join Date: Jul 2007
Location: Cocoa Beach, FL
Posts: 851
Total Cats: 16
Wrecked '90 partout
I have a '90 that has pretty much full body damage. Trunk lid and finish panel are probably the only things in decent condition. It has a T1 Torsen 4.1:1, dash has a small crack in the middle of the passenger side, center console is crap, and I'm taking the top, valve cover, greddy turbo manifold, intercooler, intake and piping, and VTPS.
Some parts:
Torsen swap (diff, axles, driveshaft) - $400
A/C compressor - $40
Full A/C - $100
motor w/o valve cover or COPs - $50 (SNC with a bit of wobble)
alternator - $20
Greddy TD04 - $100 (could use a rebuild) - SOLD
5 speed - $150
Dash, radio surround, glovebox - SOLD
HVAC controls - SOLD
Interior door handles - SOLD
Injectors - Pending
Everything is OBO, but I think the prices are pretty low. I'd prefer local people to come pick the stuff up since I need to get it out of here ASAP and have no time to really pull stuff off, but I'll pull it off and ship if there's interest and the $ is worth my time. Plenty of other stuff, just ask.
Some parts:
Torsen swap (diff, axles, driveshaft) - $400
A/C compressor - $40
Full A/C - $100
motor w/o valve cover or COPs - $50 (SNC with a bit of wobble)
alternator - $20
Greddy TD04 - $100 (could use a rebuild) - SOLD
5 speed - $150
Dash, radio surround, glovebox - SOLD
HVAC controls - SOLD
Interior door handles - SOLD
Injectors - Pending
Everything is OBO, but I think the prices are pretty low. I'd prefer local people to come pick the stuff up since I need to get it out of here ASAP and have no time to really pull stuff off, but I'll pull it off and ship if there's interest and the $ is worth my time. Plenty of other stuff, just ask.
Last edited by TrickerZ; 12-03-2010 at 03:05 PM.
#4
Senior Member
Thread Starter
iTrader: (6)
Join Date: Jul 2007
Location: Cocoa Beach, FL
Posts: 851
Total Cats: 16
$450 for Torsen and axles
Car was red. The weather stripping that you would rest your arm on if the window was down? That would be hard to remove without breaking clips and isn't in the best condition anyway. The mirror is electric, but I have the harness and control for it if you wanted to convert.
Car was red. The weather stripping that you would rest your arm on if the window was down? That would be hard to remove without breaking clips and isn't in the best condition anyway. The mirror is electric, but I have the harness and control for it if you wanted to convert.
#5
I need the rubber grommet for the speedometer on the firewall and 2 bolts for the rear subframe brace under the car. Just clip the speedo line at the rubber grommet and the rubber grommet should unclip out.
I also need the rubber fitting and tubing for the battery vent.
15 shipped for these sound okay?
How about the gauge hood? If none of the tabs are cracked I'll take it also pending price.
I also need the rubber fitting and tubing for the battery vent.
15 shipped for these sound okay?
How about the gauge hood? If none of the tabs are cracked I'll take it also pending price.
#7
Senior Member
Thread Starter
iTrader: (6)
Join Date: Jul 2007
Location: Cocoa Beach, FL
Posts: 851
Total Cats: 16
If I remember right the grommet came with the speedometer cable, so I may actually have a spare from the one I replaced. You'll have to show me which bolts you need. battery vents are no problem and $15 is good. Hood is not cracked and all clips are there. I'll take it off and double check nothing's changed. Not sure what shipping costs or really how to ship it without risking it breaking, though. Any ideas are welcome.
Exhaust is not stock, it's a straight through exhaust with a resonator and no muffler, cat is hollowed out and one of the hangers is broken off, but it's a pretty decent. Say $50 if you still want it. I have the standard Greddy DP if you want it, too.
Exhaust is not stock, it's a straight through exhaust with a resonator and no muffler, cat is hollowed out and one of the hangers is broken off, but it's a pretty decent. Say $50 if you still want it. I have the standard Greddy DP if you want it, too.
#13
Senior Member
Thread Starter
iTrader: (6)
Join Date: Jul 2007
Location: Cocoa Beach, FL
Posts: 851
Total Cats: 16
Haha, ok. I forgot to mention, I also drilled out the mounting holes for the larger threads of my ETD tubular manifold. It's not much, so I doubt it'd cause any issues, but just wanted to make sure you knew before buying. PMed my paypal
#16
I have an FM mani/outlet/DP as well as the remainder of the exhaust components I want installed, so I'm looking mainly for the bends and the resonator, which you have. Obviously it won't bolt up to my downpipe as is, but I'll need my cat welded in anyway.
#17
Senior Member
Thread Starter
iTrader: (6)
Join Date: Jul 2007
Location: Cocoa Beach, FL
Posts: 851
Total Cats: 16
I believe it's 2.25", mild, no flex, mandrel. I'll have to take a look at it and make sure. I'll take a pic. Pretty sure resonator is before the diff. and goes straight to the stock exhaust spot.