Various parts for sale, SADFAB, BBFW, 949, stock, etc.
#1
Thread Starter
Junior Member
iTrader: (2)
Joined: May 2014
Posts: 342
Total Cats: 42
From: Arlington, TX
Various parts for sale, SADFAB, BBFW, 949, stock, etc.
I'll be posting some pics of the parts at a later time, if needed. I'll probably be adding more parts as well. All prices are obo, if you don't think a price is fair, shoot me a reasonable offer and I'll respond.
All parts are located in Arlington, TX and local pickup is free. I'll ship parts to you, but it will be at your expense.
Items still available:
949 Supermiata crossflow radiator - $300. Used, but has no damage to any fins because I was careful during the install and also there was a AC condenser protecting it. As a bonus, you can have the stock fans that are still attached.
NB2 shock tower brace - $80
NB2 fuel rail and injectors - $120. Professionally ultrasonic cleaned and flowed, with new o-rings. They were all within a few CC before cleaning, but after the cleaning they are even more consistent with a better atomization according to the tester's notes.
NB2 exhaust manifold - $100. Includes heat shield.
Suzuki cappuccino windshield washer bottles - $45 - Brand new, I have 2 of them. These tuck your washer fluid reservoir into the cowl area for a clean engine bay.
Planted NB passenger low profile seat mount - new - $90
Necksgen REV medium 2" head and neck restraint system - barely used, just once uneventful track day - $400.
Bell Sport SA2105 helmet - medium, black - also used just once - f$300
Sold items:
Keegan built VVT head - $Sold
New - Blackbird fabworks drop mounts - $Sold
Blackbird Fabworx fire extinguisher mount w/HALON bottle - $Sold
New - SADFAB bushing kit - $Sold
Flyin miata VVT engine tool kit + rear main seal tool. - $Sold
Whiteline ball joint endlinks - $Sold
MiataRoadster differential mounts - $Sold
Miataroadster NB urethane + delrin steering rack bushings - $Sold
6spd MSM trans with approx. 80k - $Sold
949RACING Supermiata twin disk clutch and flywheel - $Sold.
949racing endlinks - $Sold
2x Schroth Profi 2 6 point HANS 2" harness - $Sold.
"Skou" CNC aluminum rear thermostat spacers - $Sold
Squaretop manifold - $Sold. I got this off a guy who ground off some of the casting flash, and he didn't do the best job. The manifold would look great if painted or powdercoated. Or use it as is if you don't mind the blemishes.
All parts are located in Arlington, TX and local pickup is free. I'll ship parts to you, but it will be at your expense.
Items still available:
949 Supermiata crossflow radiator - $300. Used, but has no damage to any fins because I was careful during the install and also there was a AC condenser protecting it. As a bonus, you can have the stock fans that are still attached.
NB2 shock tower brace - $80
NB2 fuel rail and injectors - $120. Professionally ultrasonic cleaned and flowed, with new o-rings. They were all within a few CC before cleaning, but after the cleaning they are even more consistent with a better atomization according to the tester's notes.
NB2 exhaust manifold - $100. Includes heat shield.
Suzuki cappuccino windshield washer bottles - $45 - Brand new, I have 2 of them. These tuck your washer fluid reservoir into the cowl area for a clean engine bay.
Planted NB passenger low profile seat mount - new - $90
Necksgen REV medium 2" head and neck restraint system - barely used, just once uneventful track day - $400.
Bell Sport SA2105 helmet - medium, black - also used just once - f$300
Sold items:
Keegan built VVT head - $Sold
New - Blackbird fabworks drop mounts - $Sold
Blackbird Fabworx fire extinguisher mount w/HALON bottle - $Sold
New - SADFAB bushing kit - $Sold
Flyin miata VVT engine tool kit + rear main seal tool. - $Sold
Whiteline ball joint endlinks - $Sold
MiataRoadster differential mounts - $Sold
Miataroadster NB urethane + delrin steering rack bushings - $Sold
6spd MSM trans with approx. 80k - $Sold
949RACING Supermiata twin disk clutch and flywheel - $Sold.
949racing endlinks - $Sold
2x Schroth Profi 2 6 point HANS 2" harness - $Sold.
"Skou" CNC aluminum rear thermostat spacers - $Sold
Squaretop manifold - $Sold. I got this off a guy who ground off some of the casting flash, and he didn't do the best job. The manifold would look great if painted or powdercoated. Or use it as is if you don't mind the blemishes.
Last edited by Dustin1824; 05-22-2018 at 09:47 AM.
#12
Thread Starter
Junior Member
iTrader: (2)
Joined: May 2014
Posts: 342
Total Cats: 42
From: Arlington, TX
The 6 speed is an item you will not want shipped because I have no idea how to ship a part that large.
#14
SadFab CEO
iTrader: (3)
Joined: Sep 2012
Posts: 4,560
Total Cats: 1,142
From: your mom's house phoenix, AZ
Just an FYI the SADfab kit is a whole delrin bushing kit in NASA/SCCA compliant fitment with an ADDITIONAL ruca-o spherical kit. They currently retail for $580 and $100 respectively. Its a steal at $500 for both.
#15
Thread Starter
Junior Member
iTrader: (2)
Joined: May 2014
Posts: 342
Total Cats: 42
From: Arlington, TX
Yes, it is a great deal, I priced the parts to sell quick, not to regain 100% of my "investment".
Sucks to sell them before I got around to installing and enjoying them.
Maybe in a few years I'll buy another miata and start from scratch.
Sucks to sell them before I got around to installing and enjoying them.
Maybe in a few years I'll buy another miata and start from scratch.