Turbo car part out, torsen, flex, hydra, turbo and more
#1
Turbo car part out, torsen, flex, hydra, turbo and more
Turbo car part out, heres the following parts up for sale.
Real Garrett Gt2871r turbo kit .64 a/r turbine housing - $1,900 plus shipping kit has 1500 miles on it
-Begi Manifold
-Adjustable wastegate
-2.5" Begi divorced downpipe
-Spearco Front mount intercooler
-Intercooler piping (setup for no cutting anything on a NA chasis)
-Apexi BOV
-Stainless steel oil lines, -10 oil return
Hydra Nemesis Standalone -$1,000
Plug and play connector for 1.8
Comes with Hydra Wideband Sensor
Comes with IAT Sensor
Comes with PC tuning cable
Torsen diff w/ axles (axles not pictured) torsen itself has 3k miles on it since purchased from Mazda - SOLD
Tein Flex 7/6 rates - $1,000 Plus shipping (about 1k miles on them since new)
Wilwood Brake kit - SOLD
-Calipers
-Rotors (have slight surface rust, so slight you can rub it out with your finger)
-Brackets for direct bolt on
Boost Gauge - $40 shipped
Flying Miata Dual EGT/Wideband gauge in one - $150 shipped
Hard Dog Roll Bar - SOLD
Flying Miata Dual Tip 2.5" exhaust, will include high flow cat - $275 plus shipping
KOYO radiator - 200 shipped
Real Garrett Gt2871r turbo kit .64 a/r turbine housing - $1,900 plus shipping kit has 1500 miles on it
-Begi Manifold
-Adjustable wastegate
-2.5" Begi divorced downpipe
-Spearco Front mount intercooler
-Intercooler piping (setup for no cutting anything on a NA chasis)
-Apexi BOV
-Stainless steel oil lines, -10 oil return
Hydra Nemesis Standalone -$1,000
Plug and play connector for 1.8
Comes with Hydra Wideband Sensor
Comes with IAT Sensor
Comes with PC tuning cable
Torsen diff w/ axles (axles not pictured) torsen itself has 3k miles on it since purchased from Mazda - SOLD
Tein Flex 7/6 rates - $1,000 Plus shipping (about 1k miles on them since new)
Wilwood Brake kit - SOLD
-Calipers
-Rotors (have slight surface rust, so slight you can rub it out with your finger)
-Brackets for direct bolt on
Boost Gauge - $40 shipped
Flying Miata Dual EGT/Wideband gauge in one - $150 shipped
Hard Dog Roll Bar - SOLD
Flying Miata Dual Tip 2.5" exhaust, will include high flow cat - $275 plus shipping
KOYO radiator - 200 shipped
Last edited by da chop; 09-25-2011 at 11:50 PM.
#2
Why don't you answer emails on craigslist?
Assuming this is you: http://chicago.craigslist.org/nwc/pts/2599083628.html
Assuming this is you: http://chicago.craigslist.org/nwc/pts/2599083628.html
#3
Why don't you answer emails on craigslist?
Assuming this is you: http://chicago.craigslist.org/nwc/pts/2599083628.html
Assuming this is you: http://chicago.craigslist.org/nwc/pts/2599083628.html
Did you send something and I didn't respond?
#9
The 2.5" has a magnaflow resonator, and magnaflow mufler in back, steel piping
The 3" is straight back to a magnaflow muffler, steel piping
Both systems are catback, i.e. where the downpipe ends (they dont have cats)
The hydra is a 2.5, and the wideband is going with the hydra, and I do have a IAT sensor that will go with it.
If this is bolted to a 1.8, and everybody swaps to 1.8 brakes. It safe to say these fill be a complete bolt on to a 1.6.
I'm in chicagoland area.
I just recently sold it.
The 3" is straight back to a magnaflow muffler, steel piping
Both systems are catback, i.e. where the downpipe ends (they dont have cats)
The hydra is a 2.5, and the wideband is going with the hydra, and I do have a IAT sensor that will go with it.
I'm in chicagoland area.
I just recently sold it.
Last edited by da chop; 09-20-2011 at 11:02 PM.