Hey guys, So Im parting out my ride, I have made some lifestyle changes and no longer want to own a car like this. No one is gonna pay what i want for the car complete so that is why i have decided to part it out to fund my next car. I have spent the last 6 years building it as many know, most of you have followed my build thread. I tried my best not to cheap out and cut corners. Please do not turn this thread into a “why are you selling, your crazy for selling “ thread.

So my prices are not 100% firm, i am willing to negotiate on everything. But please do not expect me to give my stuff away. I know what i paid for everything and have receipts for most stuff and the sticker that came with them. While some parts may be a few years old, the car only has 1000 miles on the current build. Everything is in pretty good condition. I will tell you of any defects, i want to be honest and not screw anyone over.

I am not posting a million pictures of everything, If you are interested in a part please PM or E-Mail me and i can get you pictures and discuss the transaction further.

The car is still together at the moment, i will start pulling it apart as people buy parts. Please allow me some time to do this, every would love to have stuff yesterday, but i work full time and have a house and wife to tend to as well.





IF THE PART YOU WANT DOES NOT HAVE A PRICE NEXT TO IT, IT MEANS ITS PART OF A PACKAGE. STOP ASKING ME ABOUT SELLING THE HEAD, AS OF RIGHT NOW ITS PART OF THE LONG BLOCK. THIS ALSO APPLYS TO THE CHASSIS. IM NOT SELLING HOODS,TRUNKS,STEERING,BRAKES OFF THE CHASSIS.






I am expecting payment in two ways

CASH/PICK-UP

PAYPAL / UPS SHIPPING OR USPS FLAT RATE (US 48 only)

ANY ITEMS OVER $500,BUYER PAYS PAYPAL FEES, (unless local pickup)

ALL PARTS ARE SOLD AS IS


Here is what i have to sell.




Miata Parts List

Engine $4500 (long block only, pan to valve cover+ alternator)

94 block
weisco 84.5mm 9.0:1 pistons
carrillo super A-beam rods
arp main studs
miataroadster billet oil pump gears
ati harmonic balancer
clevite bearings
brass freeze plugs
oem crank (micro polished + balanced)
balanced rotating assembly


99 head
port & polished (have flow sheets)
Integral R3 intake cam
Integral R1 exhaust cam
Supertech stainless +1mm valves
Supertech Single valve springs + titanium retainer (steel spring seats)
Head modified to except cams
Mazda comp SUB
Supertech lash caps
bronze valve guides
arp head studs
fidanza cam gears
gates racing timing belt
garage spec aluminum water pump and alternator pulleys
oem shaved valve cover, black wrinkle paint with -10AN breather fittings

Fuel

Precision 880cc Low imp injectors $225
Aeromotive A-1000 regulator $150


COMPLETE OIL SYSTEM $450
Canton remote filter blocks
Earls oil cooler thermostat
Fluidyne oil cooler
Canton 1qt accusump
-8AN oil lines
(uses small block chevy filter)

FORCED INDUCTION
Custom Synapse Motorsport sidewinder style stainless turbo manifold
T3 flange, 1/8npt for EGT
Custom Synapse Motorsport 3” V-band downpipe with two O2 bungs
Custom Synapse Motor sport 3” V-band exhaust with Borla XR-1 muffler $1800

Garrett GT3071R turbo .63 A/R T3 housing with V-band exhaust
$900



I will sell full turbo kit with oil lines,coolant lines, and amsoil air filter for $2800



Custom Intake manifold with velocity stacks
Edlebrock 75mm throttlebody
$450


Megasquirt MS-1 with internal injector drivers + EBC (built by braineak) $450

Inovate LC-1 wideband $125
AEM tru-boost boost controller gauge $250
Greddy Boost,EGT,Oil pressure,Water temp,Oil temp gauges (the boost and one temp gauge dont have working lights) $125 ea, $100 ea no lights

Autometer ES series 3 1/2 tach $200


Braille 11lb Battery and Custom Mount $150


Suspension

Stance AL+ coilovers $950 (pending)


Wheels and Tires

Rota Grid Off-Road 16x8 +10 (2 full sets)
Nexen N3000 225/45/16 rear tires
Federal RSR front tires 205/40/16
$600 with these tires

$500 for second set with no tires

2 wheels are brand new

Drivetrain

2002 6speed tranny (still works but could use a rebuild)
$450


Fidanza 8lb flywheel $125 (pending)



Welded 1.8 diff
3.636 R+P
Weir performance solid distance peice
MMR solid mounts (built this year with all oem bearings and seals, soild no noise) $500


Chassis

Custom tube front end
Custom roll cage
Autokonexion Kevlar widebody kit (front bumper,side skirts,fenders,rear over fenders)
Quick release front bumper with dzus
Rear quarter’s cut and welded for tire clearance
Autokonexion vented carbon hood
Autokonexion carbon finish pannel
Autokonexion carbon version 2 trunk
Wisdom rear bumper (quick release with dzus)
Gutted doors with custom inside latches
OEM 94 dash
New windsheild
OEM hardtop with Spec mounts
Custom headlights
-16 AN coolant re-route
Custom -16 thermostat housing
V-mount intercooler
Greddy Type RS BOV
AFCO sccirraco style radiator
Tow hooks

Energy suspension poly bushings through out
TC sportline RUCA
FM sway bars
Safe Racer sway bar end links
Secrete Element angle increasing inner tie rod
Custom Bump steer adjustable tie rod end
Goodwin racing 11” wilwood front BBK
M-tuned rear sport brake upgrade
Stainless brake lines
ARP extended wheel studs
Speed bleeders on all calipers
Custom hydro hand brake with goodridge stainless lines
Wilwood prop valve
De-powered steering rack

I will make the chassis rolling, with some wheels and stock suspension. $6500






RCI 5pt harness (cert good ) $100
RCI 5pt harness ( needs new cert)$ 60



Sparco Circuit Pro driver seat ( just ripped the outside of the right leg bolster) $600
Buddy Club Passenger seat $200

NRG slim hub+NRG slim quick release $180 (pending)

Sparco 345 steering wheel $200





Zex Turbo Nitrous Kit (WET) $500 (pending)



Like i said, im willing to negotiate on the prices but no low ballers. Do your homework before you come and insult me. I will provide pictures and respond as fast as i can. This is your chance to get some great stuff for a good price. Some items are like new, some have some normal wear.

HELP ME MAKE THESE PARTS GO TO A GOOD HOME FOR GOOD USE

In case my PM box is full, please email me @ mzdana8@yahoo.com

 

how much for the head? how many miles on it?

 

long block is sold together for now

IF THERE IS NO PRICE NEXT TO THE ITEM, IT GOES TOGETHER WITH SOMETHING ELSE. SOME THINGS ARE BEST SOLD AS A PACKAGE

 

2002 6speed tranny (still works but could use a rebuild)
$450

Interested, How beat are we talking, notchy cold shifts or super noisy?

 

ok well can you send me pics of the intake? i sent you a email if you want to attach them to the email.

thanks

 

pics of the NRG hub/QR please

 

notchy shifting i guess, no noise though. syncro's are worn and doesnt want to shift well/fast at high rpm. Still works fine for normal driving and but dont try to drag race with it.

 

ill post tonight

 

Would you split the oil cooler and accusump? I already have an oil cooler. Pics please.

 

Not splitting the oil system

 

dibs on shortshifter. im the one that emailed you by the way

 

How much for the front brakes?

 

How about a pic of the whole car, for those of us that haven't followed your build. Under hood, Roll bar.... Just a couple angles. I'm sure a lot of the parts will be able to be seen pretty easily.

 

bump

 

Can you send me pics of the intake? Icpkorn23@aim.com

 

ygpm

 

Sent you an email about the seat... No response

 

PM sent

 

Would you sell the steering rack? Just damaged mine will trying to depower it...
Thanks!

 

sorry im very very busy, i probably should have waited until after i finish building my deck and other **** to do this. I havent gotten the seat out. And and i know its not gonna be much less than $100 to ship it, its oversize.