Track Car part-out (chicagoland)
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2010
Location: New Lenox, IL
Posts: 85
Total Cats: 0
Track Car part-out (chicagoland)
MIATA PART OUT!
more stuff to come - if you don't see it ask
Willing to ship some of this, just ask. If you want pictures, PM me with your phone # or email.
Racing Tow Hooks (pair) - 40
Tein Flex Coilovers 10k/6k - 900
Swaybar Combo with Adj. Endlinks, FM front sway, 1.8L rear - 200
2.5" Test Pipe - 50
Koyo Racing 37mm Radiator - 225
Finish Panel - 75
Autokonexion V1.5 Trunk - 200
Racetech RT4009HRV racing seat - 600
Miata Cage window clips - 20
Stock Doors (pair) w/ windows + panels - 250
Gutted Doors (pair) - 80
Stock Aluminum Hood w/pins, headlight covers riveted on - $50
Stock Rear Bumper Cover - 50
NA8 Calipers and Brackets w/booster, master, and SS lines - 150
Stock Tailights (pair) -- 50
Subassemblys - F&R subframes,control arm w/poly bushings,steering rack,and braces - 300
90-93 Gutted Dash w/tombstone, gauge cluster, and gauge hood - 60
Pedals - 30
94-97 Gas Tank w/pump - 30
Misc Seals - OBO
SOLD ITEMS
SM Hardtop Brackets - SOLD
Clearwater Miata Door Speakers - SOLD
OE Bosch Battery (few months old) - SOLD
AK 30mm front fenders - SOLD
AK 30mm rear fenders - SOLD
94 Manual ECU - SOLD
94-97 OE Airbox, MAF, w/Jackson racing filter - SOLD
94 Full wiring harness and fusebox -- SOLD
Frankenstein Mounts - SOLD
Front Bumper - SOLD
COT Wing - SOLD
RB Header - SOLD
Exhaust - SOLD
DIYPNP - SOLD
Innovate Wideband - SOLD
BBK - SOLD
Sport Brakes - SOLD
6UL Wheels - SOLD
Schroth Harness - SOLD
Sparco Wheel/Hub - SOLD
Roll Cage - SOLD
SoftTop - SOLD
Torsen Differential - SOLD
Six Speed Trans - SOLD
Engine - SOLD
Thanks!
-Ryan
more stuff to come - if you don't see it ask
Willing to ship some of this, just ask. If you want pictures, PM me with your phone # or email.
Racing Tow Hooks (pair) - 40
Tein Flex Coilovers 10k/6k - 900
Swaybar Combo with Adj. Endlinks, FM front sway, 1.8L rear - 200
2.5" Test Pipe - 50
Koyo Racing 37mm Radiator - 225
Finish Panel - 75
Autokonexion V1.5 Trunk - 200
Racetech RT4009HRV racing seat - 600
Miata Cage window clips - 20
Stock Doors (pair) w/ windows + panels - 250
Gutted Doors (pair) - 80
Stock Aluminum Hood w/pins, headlight covers riveted on - $50
Stock Rear Bumper Cover - 50
NA8 Calipers and Brackets w/booster, master, and SS lines - 150
Stock Tailights (pair) -- 50
Subassemblys - F&R subframes,control arm w/poly bushings,steering rack,and braces - 300
90-93 Gutted Dash w/tombstone, gauge cluster, and gauge hood - 60
Pedals - 30
94-97 Gas Tank w/pump - 30
Misc Seals - OBO
SOLD ITEMS
SM Hardtop Brackets - SOLD
Clearwater Miata Door Speakers - SOLD
OE Bosch Battery (few months old) - SOLD
AK 30mm front fenders - SOLD
AK 30mm rear fenders - SOLD
94 Manual ECU - SOLD
94-97 OE Airbox, MAF, w/Jackson racing filter - SOLD
94 Full wiring harness and fusebox -- SOLD
Frankenstein Mounts - SOLD
Front Bumper - SOLD
COT Wing - SOLD
RB Header - SOLD
Exhaust - SOLD
DIYPNP - SOLD
Innovate Wideband - SOLD
BBK - SOLD
Sport Brakes - SOLD
6UL Wheels - SOLD
Schroth Harness - SOLD
Sparco Wheel/Hub - SOLD
Roll Cage - SOLD
SoftTop - SOLD
Torsen Differential - SOLD
Six Speed Trans - SOLD
Engine - SOLD
Thanks!
-Ryan
Last edited by ryanmx5; 11-17-2014 at 09:57 PM. Reason: marking items as sold
#13
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2010
Location: New Lenox, IL
Posts: 85
Total Cats: 0
Exhaust is non-resonated, 2.25", SS enthuza M1 Racer. It has ~20k miles on it, sounds great (to me) is lightweight 16.5lbs. It does have a broken hangar, which I will include, but will need welded back on (preferably on your car, so you can get it to line up perfectly). No dents or unusual abuse, the car was never that low 4.25".
Steering wheel is Sparco 300 suede. The suede is matted down in the usual hand positions from not wearing gloves, but I didn't have a problem with it. It is on the small side (300mm) but I liked it. It worked fine for me, (depowered rack and R compounds), I have long legs so this increased my leg room so I could heel/toe better. Hub is Sparco
Steering wheel is Sparco 300 suede. The suede is matted down in the usual hand positions from not wearing gloves, but I didn't have a problem with it. It is on the small side (300mm) but I liked it. It worked fine for me, (depowered rack and R compounds), I have long legs so this increased my leg room so I could heel/toe better. Hub is Sparco
#15
Elite Member
iTrader: (7)
Join Date: Jan 2008
Location: Statesville, NC
Posts: 2,739
Total Cats: 319
Steering wheel is Sparco 300 suede. The suede is matted down in the usual hand positions from not wearing gloves, but I didn't have a problem with it. It is on the small side (300mm) but I liked it. It worked fine for me, (depowered rack and R compounds), I have long legs so this increased my leg room so I could heel/toe better. Hub is Sparco