Miata parts for sale/trade Buy, trade or sell your Miata parts here.

Supercharger (260WHP), HardDog Roll Bar, Side Skirts/Rear Splash Guards!

Thread Tools
 
Search this Thread
 
Old 08-03-2014 | 10:18 PM
  #1  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default Supercharger (260WHP), HardDog Roll Bar, Side Skirts/Rear Splash Guards!

I have several items I am selling after a season of autoX....

First, I have an Ubercharger. Fits 1.8 99 plus. I will be including everything needed to make this kit "plug and play" ish.

Intercooler
All IC piping
Ubercharger
2 nose pulley(8psi, 11psi)
IAT sensor
MS2 with the current E85 tune, and can email copy of a gas tune if desired. The gas tune is not "dyno Tuned" like the E85. It was basicly my get around town, travel tune.
750 FIC Injectors (less than 3 months old)

This kit is currently making 261 WHP and peaking at 217 torq. Making over 200 torq before 2000 RPMS! Great setup for someone looking to run on the stock motor as I am currently on a stock bottom end and have been with no problems for an entire season of autocross. The E85 tune could use some altering to make more power but I left it really conservative to avoid blowing up the stock bottom end. It could use some more timing in most of the graph.

My K and N filter will not be included in the kit.. get your own air filter!

Can provide as many pictures as desired!

http://s18.postimg.org/7ele8ilwp/IMG_0817.jpg

http://s27.postimg.org/4d097n8nn/IMG_0819.jpg

http://s13.postimg.org/qyygdxilz/IMG_0820.jpg

http://s29.postimg.org/crk2damtz/IMG_0821.jpg

http://s27.postimg.org/hy07y9383/IMG_0823.jpg

Asking 3600$ - - Willing to ship at your expense... but its pretty heavy.


Have a HardDog Extreme Roll bar up for grabs.. Has some scratching where the soft top comes up and touches it on the top. Shown in pictures.





Negotiable on pricing. Once again, willing to ship at your expense..


Factory Side Skirts and rear splash guards off an 00 SE... Paints not perfect on either. Want them out of my garage.

http://s30.postimg.org/f9v5d5fg1/IMG_0827.jpg

http://s28.postimg.org/jsd43fuzx/IMG_0830.jpg

Negotiable on both sets. Willing to ship at your expense...

Any questions or comments, feel free to PM or shoot me a text at 5019203816.

Bona

Attached Thumbnails Supercharger (260WHP), HardDog Roll Bar, Side Skirts/Rear Splash Guards!-img_0819.jpg  

Last edited by curly; 08-13-2014 at 02:04 AM.
Old 08-03-2014 | 11:00 PM
  #2  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default

Dyno sheets and Video of Dyno Pull Available per request..
Old 08-03-2014 | 11:30 PM
  #3  
Greasemonkey2000's Avatar
I'm Miserable!
iTrader: (3)
 
Joined: Dec 2013
Posts: 242
Total Cats: -1
From: Central Texas
Default

Cool, you don't see uberchargers for sell very often, good price too.
Old 08-06-2014 | 09:18 PM
  #4  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default

Bump! Great kit! Needs a new home!
Old 08-06-2014 | 10:56 PM
  #5  
DNMakinson's Avatar
Retired Mech Design Engr
iTrader: (3)
 
Joined: Jan 2013
Posts: 5,012
Total Cats: 859
From: Seneca, SC
Default

Location?
Old 08-06-2014 | 11:03 PM
  #6  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default

Little Rock Arkansas. Sorry for not posting that in original posting.
Old 08-07-2014 | 12:48 PM
  #7  
zoomazoomzoom's Avatar
Junior Member
 
Joined: Apr 2014
Posts: 55
Total Cats: -22
From: Phoenix AZ
Default

1.8 l motor + 2.0 l supercharger = fun?! seriously huge supercharger!
Old 08-07-2014 | 12:59 PM
  #8  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default

Its a 1.2l SC... Which is still huge but its not 2.0L huge. Pretty solid size in comparison to the motor though. Making over 200 Ft LB before 2000 RPM so itll get up and move.

Bona
Old 08-07-2014 | 01:41 PM
  #9  
slammed200's Avatar
Junior Member
iTrader: (8)
 
Joined: Jun 2012
Posts: 485
Total Cats: 29
From: Knoxville, TN
Default

Interested in the side skirts shipped to 47201. PM me a shipped asking price
Old 08-07-2014 | 02:05 PM
  #10  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default

PM sent!
Thanks
Old 08-12-2014 | 10:12 PM
  #11  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default

bump.. Open to offers on all parts.
Old 08-13-2014 | 12:11 AM
  #12  
zacktrotter_uncc's Avatar
Junior Member
iTrader: (-1)
 
Joined: Nov 2013
Posts: 171
Total Cats: -156
From: GA
Default

What type of s/c and intercooler
Old 08-13-2014 | 12:24 AM
  #13  
Greasemonkey2000's Avatar
I'm Miserable!
iTrader: (3)
 
Joined: Dec 2013
Posts: 242
Total Cats: -1
From: Central Texas
Default

Says above regarding s/c, 1.2 liter whipple.
Old 08-13-2014 | 12:26 AM
  #14  
BonaZ's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 46
Total Cats: -7
From: Little Rock, AR
Default

1.2L Whipple... AX1200... Twin Screw cold side kit, with the intercooler that came with the kit originally un-altered.
Old 08-13-2014 | 01:06 AM
  #15  
guttedmiata's Avatar
Junior Member
 
Joined: Sep 2012
Posts: 440
Total Cats: 3
Default

This kit will make 300hp with a different pully set up.
Bump for a nice kit.
Old 08-22-2014 | 07:06 AM
  #16  
axmed518's Avatar
Junior Member
iTrader: (1)
 
Joined: Mar 2014
Posts: 53
Total Cats: -5
From: Baku, Azerbaijan
Default

nterested in the side skirts shipped to 19804-1618.Asking for price
Old 08-22-2014 | 09:05 AM
  #17  
djcarr's Avatar
Newb
 
Joined: Jul 2014
Posts: 22
Total Cats: -2
Default

Can the Ubercharger kit be used in a 96 1.8?
Old 08-27-2014 | 10:55 PM
  #18  
stephen0p0g's Avatar
Newb
 
Joined: Feb 2011
Posts: 5
Total Cats: -2
Default

Bump!
Reply
Leave a poscat -1 Leave a negcat
Old 08-30-2014 | 02:56 AM
  #19  
axmed518's Avatar
Junior Member
iTrader: (1)
 
Joined: Mar 2014
Posts: 53
Total Cats: -5
From: Baku, Azerbaijan
Default

Interested in the side skirts shipped to 19804-1618.Asking for price
Old 08-30-2014 | 05:50 PM
  #20  
stephen0p0g's Avatar
Newb
 
Joined: Feb 2011
Posts: 5
Total Cats: -2
Default

buddy bump
Reply
Leave a poscat -1 Leave a negcat



All times are GMT -4. The time now is 04:18 AM.