RX7 550cc Fuel Injectors - Two Sets
#1
Elite Member
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Atlanta
Posts: 7,486
Total Cats: 372
RX7 550cc Fuel Injectors - Two Sets
BOTH SETS ARE SOLD
I have two sets of 4 RX7 purple/red top Denso high impedance injectors (#195500-1370). They've tested good for mechanical action, but are used pulls and will need to be cleaned. These injectors use a square/rectangle connector vs. the Miata round style. Square connector pigtails can be purchased anywhere (I got mine at Napa for $2.75 each) and spliced into the Miata harness. These are the same injectors I am using on my Miata now. $80/set + s/h via Fedex ground (includes tracking number and insurance). Paypal preferred, personal check acceptable- but must clear before I ship. Long time ebayer- perfect feedback. - rob
I have two sets of 4 RX7 purple/red top Denso high impedance injectors (#195500-1370). They've tested good for mechanical action, but are used pulls and will need to be cleaned. These injectors use a square/rectangle connector vs. the Miata round style. Square connector pigtails can be purchased anywhere (I got mine at Napa for $2.75 each) and spliced into the Miata harness. These are the same injectors I am using on my Miata now. $80/set + s/h via Fedex ground (includes tracking number and insurance). Paypal preferred, personal check acceptable- but must clear before I ship. Long time ebayer- perfect feedback. - rob
Last edited by m2cupcar; 02-25-2007 at 09:15 AM.
#2
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
#8
Elite Member
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Atlanta
Posts: 7,486
Total Cats: 372
I can appreciate Ben's point, and FM's product because I know that there are those that don't want to cut anything on their Miata. And for them, this is the perfect solution. Of course the irony is that they probably would be buying some of those FM/RC injectors.
Wonder if you could use the entire harness for the probe/mx6 and just swap the other end with the Miata harness (if it isn't the same).
Wonder if you could use the entire harness for the probe/mx6 and just swap the other end with the Miata harness (if it isn't the same).
#10
#11
this should be a pnp harness adaptor
On track with this thread though, great price IMO on the injectors. Thats less than I bought mine for!
#12
I thought it the rx-7 high impedance injectors were serial # xxxxxx-2020
haven't heard of the 1370's
haven't heard of the 1370's
#13
more info please, what year were this on, aren't they supposed to be purple? have they been stored or in recent use???
#14
Ok I checked looks like they are from an 86 -87 rx-7. sorry for the earlier post.
#15
#16
they are p&p as far as the impedance is concerned but the wiring connector is a differant shape and they obviously need cleaning and testing. as stated by the seller.
#17
#18
i'll have to wait till next week and see if my paycheck will allow me to purchase a set, there is still one more left right?
#19
Elite Member
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Atlanta
Posts: 7,486
Total Cats: 372
Yes - still one set left as My is buying one. These are 88 TII injectors- there was a mid year change to low impedance after these high impedance were used. They are not PnP only because of the actual connector, but as mentioned you can buy them from the parts store, a junk yard or buy the adapters (from FM and possibly elsewhere). These are pulls and have been shelved- they have proper mechancial action (just like mine did), but I wouldn't buy them thinking they'll drop in and work as-is (though they might) - they'll most likely need a good cleaning (either being sent out to a pro, or done using various techniques listed on google - more work than worth the charge from places listed on this site IMO). They work on a Miata - I've been using them on my car w/o issue for ~800 miles. PM if you want to buy and I'll provide purchase info. - rob
#20
sorry, tax levy is kicking my *** now... i'm out...