RevLimiter Turbro gauges - now with 50% more confetti
#185
Today was a rather strange day in Texas. Went to class at 9, it was kinda snowing at that point.
Came out at 11, and found this:
It was literally pouring snow. Great. I love the snow, but people here lose their damn minds in winter weather.
My drive normally takes 20 minutes to get home.
Today, it took 2.5 hours. To go 12 miles. This was infuriating.
My only hope was focusing on my Trubo Kitten gauge:
Yes, I took this picture with a potato.
Turbo Kitty was the only thing that kept me from going into a total rage.
Turbo Kitty saved my life.
Thanks Adam!
Came out at 11, and found this:
It was literally pouring snow. Great. I love the snow, but people here lose their damn minds in winter weather.
My drive normally takes 20 minutes to get home.
Today, it took 2.5 hours. To go 12 miles. This was infuriating.
My only hope was focusing on my Trubo Kitten gauge:
Yes, I took this picture with a potato.
Turbo Kitty was the only thing that kept me from going into a total rage.
Turbo Kitty saved my life.
Thanks Adam!
#187
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
Just to preface; I'm drunk now. I was hammered when i bought these. And i was top 17 wasted when i sent Adam money.
Also, when i opened the bag of sterile gloves and the swiffer pad thing there was glitter/confetti inside of it. So pretty much all bets of keeping it confetti and glitter free went out the window at that moment.
Oh and i've done this before, so i'm kinda a professional.
Shizzz i'm already 2 beers deep at this point.
easy
in
Probably should have went with the LEDs like i did with my NA, whatever. Plus i didn't hack the plastic to keep it as OEM as i could.
2.5 beer job for someone who has experience and is drunk.
Also, when i opened the bag of sterile gloves and the swiffer pad thing there was glitter/confetti inside of it. So pretty much all bets of keeping it confetti and glitter free went out the window at that moment.
Oh and i've done this before, so i'm kinda a professional.
Shizzz i'm already 2 beers deep at this point.
easy
in
Probably should have went with the LEDs like i did with my NA, whatever. Plus i didn't hack the plastic to keep it as OEM as i could.
2.5 beer job for someone who has experience and is drunk.
#190
*******.
*******.
It was easy to resist the initial renderings. They looked like a simple image and not a gauge. Cool, yes. Worth spending money on, no.
The installed pictures by revlimiter were too pretty and it all looked fake. Still not convinced.
But these, these are real. And awesome. And now I want some. **** you both. My oil gauge will have to say "Nothing, Literally Nothing" because that's its purpose. When an oil sender is disconnected a gauge should read 0psi, not dead center. ******* useless.
How hard is it to reset needle positions?
*******.
It was easy to resist the initial renderings. They looked like a simple image and not a gauge. Cool, yes. Worth spending money on, no.
The installed pictures by revlimiter were too pretty and it all looked fake. Still not convinced.
But these, these are real. And awesome. And now I want some. **** you both. My oil gauge will have to say "Nothing, Literally Nothing" because that's its purpose. When an oil sender is disconnected a gauge should read 0psi, not dead center. ******* useless.
How hard is it to reset needle positions?
#191
*******.
*******.
It was easy to resist the initial renderings. They looked like a simple image and not a gauge. Cool, yes. Worth spending money on, no.
The installed pictures by revlimiter were too pretty and it all looked fake. Still not convinced.
But these, these are real. And awesome. And now I want some. **** you both. My oil gauge will have to say "Nothing, Literally Nothing" because that's its purpose. When an oil sender is disconnected a gauge should read 0psi, not dead center. ******* useless.
How hard is it to reset needle positions?
*******.
It was easy to resist the initial renderings. They looked like a simple image and not a gauge. Cool, yes. Worth spending money on, no.
The installed pictures by revlimiter were too pretty and it all looked fake. Still not convinced.
But these, these are real. And awesome. And now I want some. **** you both. My oil gauge will have to say "Nothing, Literally Nothing" because that's its purpose. When an oil sender is disconnected a gauge should read 0psi, not dead center. ******* useless.
How hard is it to reset needle positions?
As far as setting the needles, super easy, at least it was for the tach. I still have a stock ecu, so I had to drive the car around for a bit until it was warm, and my Bluetooth OBDII showed a rock steady idle at 800 RPM. Then I pushed the need on, in the 800 RPM position, enough to be snug.
Returned home, pushed the needle on further, then put the clear plastic part back on the gauges.
Simple. I bet the speedo is a bit more dicey, but still totally doable.
#192
Just to preface; I'm drunk now. I was hammered when i bought these. And i was top 17 wasted when i sent Adam money.
Also, when i opened the bag of sterile gloves and the swiffer pad thing there was glitter/confetti inside of it. So pretty much all bets of keeping it confetti and glitter free went out the window at that moment.
Oh and i've done this before, so i'm kinda a professional.
Also, when i opened the bag of sterile gloves and the swiffer pad thing there was glitter/confetti inside of it. So pretty much all bets of keeping it confetti and glitter free went out the window at that moment.
Oh and i've done this before, so i'm kinda a professional.
So that explains the request for a "truly epic, record breaking amount of confetti" in the order. hahaha
#193
Sure! Hit my order form or email. I'd just ask for a small donation greater than $2, which is postage cost. The toppers are easy to make and too fun to hoard.
That is one I've never heard. heh. All of my pix are basically out of the camera, converted to JPG and sized down for my store, and posted.
That is one I've never heard. heh. All of my pix are basically out of the camera, converted to JPG and sized down for my store, and posted.
#194
Elite Member
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
Ahh fucckkkk ....
I'm going to get my JDM cluster installed, and then get gauges. I can see my future. Must .. resist ... contributing to RevJr's college 529 fund ...
Damn this work is fabulous. I have never been, and am not, a flash/function guy. I mean, I'M NOT. But such fabulouslness ... f
Money given to Rev is the only, the ONLY, funds in 8 years of owning the car that have not been based in absolute function > form. And the fabulousness of Rev's work makes it hard to make that "it's not function" distinction.
Well done Adam. I'll be contacting you when my conflicted self (and my bank account, after the horrendous physical upgrade costs are recovered from), makes a decision.
I'm going to get my JDM cluster installed, and then get gauges. I can see my future. Must .. resist ... contributing to RevJr's college 529 fund ...
Damn this work is fabulous. I have never been, and am not, a flash/function guy. I mean, I'M NOT. But such fabulouslness ... f
Money given to Rev is the only, the ONLY, funds in 8 years of owning the car that have not been based in absolute function > form. And the fabulousness of Rev's work makes it hard to make that "it's not function" distinction.
Well done Adam. I'll be contacting you when my conflicted self (and my bank account, after the horrendous physical upgrade costs are recovered from), makes a decision.
#195
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I knew you would come around.
Don't know what your talking about with the function > form though, that silly wing on your little car can't actually be doing anything
Don't know what your talking about with the function > form though, that silly wing on your little car can't actually be doing anything