Quality turbo pieces to complete your setup... Panasports etc..
#1
Junior Member
Thread Starter
iTrader: (7)
Join Date: Jan 2010
Location: Long Island, NY
Posts: 349
Total Cats: 1
Quality turbo pieces to complete your setup... Panasports etc..
Instead of abandoning my aspirations for boost.. I've switched up many of the components to stay within my budget.
So, I've compiled some of my threads into one; since I can't edit my originals.
Tial Turbo Flange (SS) - 12 dollars shipped
Came with my new Tial BOV..
Tial Unpainted Spring (11 psi) - 22 dollars shipped
Came with my new Tial BOV - switched to a 6psi (black) spring
All the following parts have been through a parts washer and look new. Flanges have brand new O-rings
T28 Outlet Flange with Boost Source - Sold
T28 Inlet Flange (Great for hooking straight into a filter) - Sold
T28 Inlet Flange - Sold
T28 (Will probably work with other setups) Oil Drain Flange with -10an adapter - 15 dollars shipped
The following are sourced from my other threads and are still available.
So, I've compiled some of my threads into one; since I can't edit my originals.
Tial Turbo Flange (SS) - 12 dollars shipped
Came with my new Tial BOV..
Tial Unpainted Spring (11 psi) - 22 dollars shipped
Came with my new Tial BOV - switched to a 6psi (black) spring
All the following parts have been through a parts washer and look new. Flanges have brand new O-rings
T28 Outlet Flange with Boost Source - Sold
T28 Inlet Flange (Great for hooking straight into a filter) - Sold
T28 Inlet Flange - Sold
T28 (Will probably work with other setups) Oil Drain Flange with -10an adapter - 15 dollars shipped
The following are sourced from my other threads and are still available.
Mine:
Asking: 60 dollars shipped
From DIYAUTOTUNE this is 95 dollars shipped.
This: http://www.diyautotune.com/catalog/m...unit-p-32.html
Asking: 60 dollars shipped
From DIYAUTOTUNE this is 95 dollars shipped.
This: http://www.diyautotune.com/catalog/m...unit-p-32.html
Included in this transaction are 4 COP adapters from a k-series motor and corresponding wires, which will be from the bulkhead. In other words, you get a lot of wire with these.
This is perfect for those of you looking to make a DIY COP conversion.
I will also include the mounting bracket that originally fit atop the valve cover of this motor (pictured).
Information on the donor car:
2005 Civic SI ( 25k miles when removed)
k20a3 motor
Price: 55 dollars shipped + fees associated with this transaction.
Thank you
Brian
This is perfect for those of you looking to make a DIY COP conversion.
I will also include the mounting bracket that originally fit atop the valve cover of this motor (pictured).
Information on the donor car:
2005 Civic SI ( 25k miles when removed)
k20a3 motor
Price: 55 dollars shipped + fees associated with this transaction.
Thank you
Brian
Good condition, no curbage, just a blemish or two.
195/50/15 rubber Bridgestone S03 - 60 percent tread
Wheels are 15x7
Car is garaged and they are nice and clean for who ever wants them. All center caps included.
700obo - no wheel trades-
located on the queens/nassau border on Long Island
195/50/15 rubber Bridgestone S03 - 60 percent tread
Wheels are 15x7
Car is garaged and they are nice and clean for who ever wants them. All center caps included.
700obo - no wheel trades-
located on the queens/nassau border on Long Island
Last edited by aug; 09-15-2010 at 10:14 AM.
#5
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,028
Total Cats: 304
I might be interested in that T28 inlet flange (great for hooking straight into a filter) and also the other one that's just an inlet flange, and I guess also the outlet flange. Maybe we could work out a package deal? My zip is 17961. I have a stock SR20 Conpressor outlet that I'm hoping these parts might fit, but I'm unsure as it's T25. Do you have measurements? Such as bolt to bolt centers, and inlet piping interior diameters?
#6
Junior Member
Thread Starter
iTrader: (7)
Join Date: Jan 2010
Location: Long Island, NY
Posts: 349
Total Cats: 1
I might be interested in that T28 inlet flange (great for hooking straight into a filter) and also the other one that's just an inlet flange, and I guess also the outlet flange. Maybe we could work out a package deal? My zip is 17961. I have a stock SR20 Conpressor outlet that I'm hoping these parts might fit, but I'm unsure as it's T25. Do you have measurements? Such as bolt to bolt centers, and inlet piping interior diameters?
As far as package deals- I'm sure we can work something out.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM