Lots of stuff for sale, MS, ARtech, CXracing, etc
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2013
Location: Livermore, CA
Posts: 138
Total Cats: -18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Doing an engine swap and don't need this stuff anymore. Pics are old stuff I found in my photobucket, if you need recent pics just ask.
MSPNP 90-93 $710 shipped
plug and play for 90-93 miata. Used all of maybe 150 miles. Includes serial cable and the DB37 connector.
DIYautotune Electronic boost control solenoid $45 shipped SOLD!
ARTech 1.8 T3 log Manifold $250 shipped SOLD!
AWR 1.8 Motor mounts 94-97 $210 shipped
70A durometer. Used these for like 10 miles.
CXracing intercooler kit $330 shipped
Comes with the knock-off greddy BOV. There are two sections that rubbed on my pulleys but have not rubbed all the way through. One is right off the turbo by the P/S pulley, the other by throttle body by at the alternator pulley. Damage is cosmetic only but some people care about that sort of thing I guess. Comes with 2.5 intake pipe for turbo and K&N filter. Can also include a greddy to tial BOV adapter if desired for an extra $10.
RX7 460CC red top injectors $150 shipped
Were sent out and cleaned by witchhunter about 150 miles ago, 3 have an "excellent" spray pattern, 1 has "good" spray pattern. All were flowing between 456-458CC.
COP kit $120 shipped SOLD!
Coolant Reroute kit $140 shipped SOLD!
Garagestar 94-97 billet alternator pulley $40 shipped SOLD!
BBB remanufactured 94-97 alternator $75 shipped SOLD!
I also have plenty of stock 1.8 miata engine parts including cyl heads, intake manifolds, sensors, etc More will probably get added later as I dig through my piles of parts and find treasures I no longer need.
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171840-lots-stuff-sale-ms-artech-cxracing-etc-1389415408.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171841-lots-stuff-sale-ms-artech-cxracing-etc-100_1511.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171842-lots-stuff-sale-ms-artech-cxracing-etc-1390417124.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171843-lots-stuff-sale-ms-artech-cxracing-etc-1463522110.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171844-lots-stuff-sale-ms-artech-cxracing-etc-1463522061.jpg?dateline=1463522557)
MSPNP 90-93 $710 shipped
plug and play for 90-93 miata. Used all of maybe 150 miles. Includes serial cable and the DB37 connector.
AWR 1.8 Motor mounts 94-97 $210 shipped
70A durometer. Used these for like 10 miles.
CXracing intercooler kit $330 shipped
Comes with the knock-off greddy BOV. There are two sections that rubbed on my pulleys but have not rubbed all the way through. One is right off the turbo by the P/S pulley, the other by throttle body by at the alternator pulley. Damage is cosmetic only but some people care about that sort of thing I guess. Comes with 2.5 intake pipe for turbo and K&N filter. Can also include a greddy to tial BOV adapter if desired for an extra $10.
RX7 460CC red top injectors $150 shipped
Were sent out and cleaned by witchhunter about 150 miles ago, 3 have an "excellent" spray pattern, 1 has "good" spray pattern. All were flowing between 456-458CC.
I also have plenty of stock 1.8 miata engine parts including cyl heads, intake manifolds, sensors, etc More will probably get added later as I dig through my piles of parts and find treasures I no longer need.
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171840-lots-stuff-sale-ms-artech-cxracing-etc-1389415408.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171841-lots-stuff-sale-ms-artech-cxracing-etc-100_1511.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171842-lots-stuff-sale-ms-artech-cxracing-etc-1390417124.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171843-lots-stuff-sale-ms-artech-cxracing-etc-1463522110.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171844-lots-stuff-sale-ms-artech-cxracing-etc-1463522061.jpg?dateline=1463522557)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/171845-lots-stuff-sale-ms-artech-cxracing-etc-1463522165.jpg?dateline=1463522557)
Last edited by 6strngs; 05-29-2016 at 11:29 AM.
#8
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2013
Location: Livermore, CA
Posts: 138
Total Cats: -18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well I can no longer edit the original thread for some reason, but here's some adjusted pricing:
MSPNP $650 shipped
CXracing intercooler kit $250 shipped
RX7 injectors $135 shipped
AWR Mounts $200 shipped
Help me out guys I need to buy some decent suspension. I just bought a miata on friday that has racelands so for the last three days I've spent more time with the rear tires airborne than on the asphalt. Pretty much undrive-able. Willing to trade too if you're local.
MSPNP $650 shipped
CXracing intercooler kit $250 shipped
RX7 injectors $135 shipped
AWR Mounts $200 shipped
Help me out guys I need to buy some decent suspension. I just bought a miata on friday that has racelands so for the last three days I've spent more time with the rear tires airborne than on the asphalt. Pretty much undrive-able. Willing to trade too if you're local.
#12
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2013
Location: Livermore, CA
Posts: 138
Total Cats: -18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Motor mounts are SOLD!
I dropped the price 2 weeks ago.
From CXracing's website:
Bar & Plate Intercooler:
Core Size: 22 x 7 x 2.5 inch
Overall Size: 28 x7 x 2.5 inch
2.5" Thick Core, 2.5" Inlet & Outlet
Polished Aluminum Piping. 2.5" on Cold side and 2" on hot side. comes with 2.75" intake pipe.
Please note mine is their 90-93 kit (at the time I bought it they did not have a separate kit for 1.8L) but I used it on both a 1.6 and 1.8. For a 1.8 it just required a creative heater hose to connect the IAC which I probably have somewhere and could include. My kit also includes a K&N filter with like 10 miles on it as opposed to the crappy one they give you in the kit. IIRC I trimmed the silicone hose where it connects to the throttle body to push the IC pipe as close to the throttle body as possible to clear the radiator hose when doing a re-route.
Originally Posted by MiataMan00
Can you take measurements of the intercooler. I am very interested.
Bar & Plate Intercooler:
Core Size: 22 x 7 x 2.5 inch
Overall Size: 28 x7 x 2.5 inch
2.5" Thick Core, 2.5" Inlet & Outlet
Polished Aluminum Piping. 2.5" on Cold side and 2" on hot side. comes with 2.75" intake pipe.
Please note mine is their 90-93 kit (at the time I bought it they did not have a separate kit for 1.8L) but I used it on both a 1.6 and 1.8. For a 1.8 it just required a creative heater hose to connect the IAC which I probably have somewhere and could include. My kit also includes a K&N filter with like 10 miles on it as opposed to the crappy one they give you in the kit. IIRC I trimmed the silicone hose where it connects to the throttle body to push the IC pipe as close to the throttle body as possible to clear the radiator hose when doing a re-route.
#13
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2013
Location: Livermore, CA
Posts: 138
Total Cats: -18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
gs]![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174559-lots-stuff-sale-ms-artech-cxracing-etc-1465584502.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174560-lots-stuff-sale-ms-artech-cxracing-etc-1465584504.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174561-lots-stuff-sale-ms-artech-cxracing-etc-1465584530.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174562-lots-stuff-sale-ms-artech-cxracing-etc-1465584553.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174563-lots-stuff-sale-ms-artech-cxracing-etc-1465584484.jpg?dateline=1466400674)
Please note the Tial BOV is NOT included, it will come with the greddy knockoff that it came with. Also there is a bung welded on for a GM IAT sensor that is also not included, it should be a standard NPT thread so you can cap it off if you're using stock ecu, and then later when you're on your 2nd engine after blowing up the first and you finally decide to go megasquirt it's already there for you and ready to go!
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174559-lots-stuff-sale-ms-artech-cxracing-etc-1465584502.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174560-lots-stuff-sale-ms-artech-cxracing-etc-1465584504.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174561-lots-stuff-sale-ms-artech-cxracing-etc-1465584530.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174562-lots-stuff-sale-ms-artech-cxracing-etc-1465584553.jpg?dateline=1466400674)
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/174563-lots-stuff-sale-ms-artech-cxracing-etc-1465584484.jpg?dateline=1466400674)
Please note the Tial BOV is NOT included, it will come with the greddy knockoff that it came with. Also there is a bung welded on for a GM IAT sensor that is also not included, it should be a standard NPT thread so you can cap it off if you're using stock ecu, and then later when you're on your 2nd engine after blowing up the first and you finally decide to go megasquirt it's already there for you and ready to go!
#16
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2013
Location: Livermore, CA
Posts: 138
Total Cats: -18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yes sir, I have the mazda protege valve cover, powdercoated wrinkle red but chipping in a few spots where the engine hoist chains contacted it. Also have a stock 1.8 valve cover, possibly have 2 of them, and a cut 1.6 valve cover powdercoated gloss red but needs redone. I share a shop with a powdercoater so I can have them redone in any color you like for ~50-70 extra (depending on desired color)
Yes it is. I started my swap today so I won't have time to drive out to meet you for the next couple weekends. Though there's a miata meet at the Quickly's in Dublin this Saturday, I could bring it with me if you were planning on going.
Intercooler still available. I sent u a PM