When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lightwerkz Quad Bi-Xenon Retrofit for NB2 Miatas (Version 2)
Morimoto D2S 3.0 projector in oem low beam location, Morimoto TL-R in high beam location, using new OEM headlights.
XPEL 8mil film
Osram 4300k nightbreaker bulbs
Hilux 35w ballasts
Full wiring harness with adapters
Version 2 is the with the Hilux ballasts (morimoto 50w ballasts were failing prematurely) and properly shrouded inner workings. The original had a lot of light scatter.
SOLD to nesky!
Last edited by thumpetto007; 05-13-2019 at 10:50 AM.
Just an FYI, brand new OEM headlights for a NB2 cost over 500 dollars. That's what I had Lightwerkz use for this retrofit. I paid over 3000 dollars for this setup, I'm only selling because I'm getting out of cars for a few years.
Wow, great cutoff on low beams. Nice job! I'd love to know how they rate in the newer comparisons of OEM headlights, just for ***** and giggles.
Looks like very little chance of over-driving the headlights at legal speeds.
Basically, each projector is comparable or better than the best oem headlights (of 2016) in terms of beam pattern, distance, and brightness. With these, you have more than twice the output of anything oem.
They are impossible to overdrive going straight, in clear weather conditions.