Interest in RX7 Big Brake Kit Brackets?
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
*Disclaimer: I am just a regular guy, not a fabber of any sort, just a hobbyist/enthusiast*
I was doing some research and it seems as if the 86-96 RX7 Front 4 piston calipers and 86-92 (and maybe 93-96) rear calipers can be made to fit with new brackets and some minor modding to the calipers, using the sport brake front rotors in the front and the 1.8 front rotors in the back. Would also require 15" wheels.
I found a shop that would be willing to make me the brackets, but I need a minimum of 4 orders to get them done.
Would 3 other people be interested in getting them made? They would cost about 120 for the front bracket pair, and probably the same for the rears.
I was doing some research and it seems as if the 86-96 RX7 Front 4 piston calipers and 86-92 (and maybe 93-96) rear calipers can be made to fit with new brackets and some minor modding to the calipers, using the sport brake front rotors in the front and the 1.8 front rotors in the back. Would also require 15" wheels.
I found a shop that would be willing to make me the brackets, but I need a minimum of 4 orders to get them done.
Would 3 other people be interested in getting them made? They would cost about 120 for the front bracket pair, and probably the same for the rears.
#11
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
id be interested in the brackets and calipers.let me know whats up. email me at xdracontiac@yahoo.com
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
*Disclaimer: I am just a regular guy, not a fabber of any sort, just a hobbyist/enthusiast*
I was doing some research and it seems as if the 86-96 RX7 Front 4 piston calipers and 86-92 (and maybe 93-96) rear calipers can be made to fit with new brackets and some minor modding to the calipers, using the sport brake front rotors in the front and the 1.8 front rotors in the back. Would also require 15" wheels.
I found a shop that would be willing to make me the brackets, but I need a minimum of 4 orders to get them done.
Would 3 other people be interested in getting them made? They would cost about 120 for the front bracket pair, and probably the same for the rears.
I was doing some research and it seems as if the 86-96 RX7 Front 4 piston calipers and 86-92 (and maybe 93-96) rear calipers can be made to fit with new brackets and some minor modding to the calipers, using the sport brake front rotors in the front and the 1.8 front rotors in the back. Would also require 15" wheels.
I found a shop that would be willing to make me the brackets, but I need a minimum of 4 orders to get them done.
Would 3 other people be interested in getting them made? They would cost about 120 for the front bracket pair, and probably the same for the rears.
#16
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
miata rear sport brakes already have "brackets".. they stick out further than the non-sport brakes. on the fm/goodwin kit you either get a bracket to move them or no bracket if you have sport brakes. I found this out the dumb way:
1. had panache-like bbk that used rx7 rear calipers
2. side-graded to goodwin kit
3. ordered recycled rear miata calipers of unknown type
4. couldn't figure out where to put bracket on rears
5. oh duh, I had sport rear calipers (sold mine ages ago when I put in the panache)
6. returned bracket for refund
7. put 2 piece rotors on rear.
for what it's worth, the miata rear brakes (size: large) have more than enough stopping power. on the track I find I have TOO much rear bias with stock pads with the goodwin kit (*** goes ***** nilly if I even THINK about trail braking). I'm moving to a more aggressive front pad to compensate.
1. had panache-like bbk that used rx7 rear calipers
2. side-graded to goodwin kit
3. ordered recycled rear miata calipers of unknown type
4. couldn't figure out where to put bracket on rears
5. oh duh, I had sport rear calipers (sold mine ages ago when I put in the panache)
6. returned bracket for refund
7. put 2 piece rotors on rear.
for what it's worth, the miata rear brakes (size: large) have more than enough stopping power. on the track I find I have TOO much rear bias with stock pads with the goodwin kit (*** goes ***** nilly if I even THINK about trail braking). I'm moving to a more aggressive front pad to compensate.
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
for what it's worth, the miata rear brakes (size: large) have more than enough stopping power. on the track I find I have TOO much rear bias with stock pads with the goodwin kit (*** goes ***** nilly if I even THINK about trail braking). I'm moving to a more aggressive front pad to compensate.
#18
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You should get an adjustable brake bias valve (also known as a hydraulic flow control valve) and put it in the rear brake line. This effectively raises the amount of braking pedal input to cause the same rear stopping power while at the same time decreases the front. If you just put more aggressive pads on the front you will generate more weight transfer off the rear and could make things worse.
#20
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You should get an adjustable brake bias valve (also known as a hydraulic flow control valve) and put it in the rear brake line. This effectively raises the amount of braking pedal input to cause the same rear stopping power while at the same time decreases the front. If you just put more aggressive pads on the front you will generate more weight transfer off the rear and could make things worse.
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
i'll forget what i've heard about bias valves and just ask: at steady state (brakes on hard) doesn't the system pressure equalize and you're back where you started? Or is it a matter of less fluid flowing to the rear means less braking on that end because the pistons aren't moving as far?
and ultimately, isn't the weight transfer the same? if my deceleration rate is the same, physics takes over and the car rotates around the CG just as before.
ideally I just want the fronts to reach their threshold before the rears.