Intercooler set up for 91 Miata.
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Comes with everything on pic including BOV
Came from my 91 without power steering but likely fits 89 to 93.
I removed the rigid Coolant tube on the driver side and replaced it with a universal lower rad hose for an easy fit on the driver's side.
The IC hangs from the two bolts that hold the hood latch from the two metal pieces shown attached to the upper cross bar on the IC
The nose does not need to be removed if the bottom front lip tray is trimmed.
Measurements: 28 from intake pipe lip to outlet pipe lip x 9 height by 2/78 thick
$300 OBO
Came from my 91 without power steering but likely fits 89 to 93.
I removed the rigid Coolant tube on the driver side and replaced it with a universal lower rad hose for an easy fit on the driver's side.
The IC hangs from the two bolts that hold the hood latch from the two metal pieces shown attached to the upper cross bar on the IC
The nose does not need to be removed if the bottom front lip tray is trimmed.
Measurements: 28 from intake pipe lip to outlet pipe lip x 9 height by 2/78 thick
$300 OBO
Last edited by poobs; 11-11-2014 at 11:32 AM. Reason: adding price
#3
#8
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ok, I'm sorry I posted this without some clarification - my bad.
The original kit was shy of $200
The BOV $45- $55 (?)
A couple of Silicone Couplers -T fitting for BOV and to match the Greddy turbo (25?)
Lots of work to make it nearly plug-play ($?)
Hope that helps
The original kit was shy of $200
The BOV $45- $55 (?)
A couple of Silicone Couplers -T fitting for BOV and to match the Greddy turbo (25?)
Lots of work to make it nearly plug-play ($?)
Hope that helps
Thread
Thread Starter
Forum
Replies
Last Post