imputs part out part 2 (turbo kit, steering knuckles, and a ton more shit)
#1
![Smile](https://www.miataturbo.net/images/icons/icon7.gif)
Work lug nuts. Price: $85 SHIPPED
![](http://farm6.staticflickr.com/5517/9090245216_ace814d3df_b.jpg)
Front SCCA Red tow hook: $20 SHIPPED
![](http://farm8.staticflickr.com/7298/9088025839_f158c683c7_b.jpg)
Rear SCCA Red tow hook $20 SHIPPED
![](http://farm6.staticflickr.com/5522/9088026621_ec404c882d_b.jpg)
Turbonetics Boost Controller w/ mount. Price: $75 Shipped
![](http://farm8.staticflickr.com/7414/9088028913_bc2ee09d42_b.jpg)
Custom coolant catch can setup. Price: $335 SHIPPED
-includes valve cover with sparkly tribal yellow paint w/ -8AN bung
-AN fittings and PTFE coated -8 SS lines
-custom billet aluminum baffled oil catch can and mount w/ filter
![](http://farm4.staticflickr.com/3712/9090270990_3ef1c585b3_b.jpg)
![](http://farm6.staticflickr.com/5481/9090273264_7bdd0386ba_b.jpg)
Flyin' Miata duel feed fuel rail. Price: $225 SHIPPED
-comes w/ SS lines/fittings, plugs right into stock.
![](http://farm6.staticflickr.com/5350/9088047109_e6ef69b87f_b.jpg)
RC 440 CC SL9-440 Injectors w/ injector clips (not pictured). Price $150 Shipped
-these were flow tested/cleaned before I got them (about a year ago 10-15k miles)
![](http://farm8.staticflickr.com/7291/9088044795_fbb1fd3da3_b.jpg)
__________________________________________________ _______________________
CUSTOM TURBO SETUP. PRICE $3,575 SHIPPED
-it took me forever to set this up properly, this is one of the most reliable, quick spooling turbo kits I have experienced. There is absolutely NO lag, instant power, boost basically starts when you touch the throttle. Only uses 4 clamps, intake/intercooler piping is super short for response.
Acceleration video (8-9psi) 0-60
-AVO MANIFOLD (super fast spool design, coated w/ 2000 degree jet coating, relief cut)
![](http://farm8.staticflickr.com/7334/9088042415_c173a1c510_b.jpg)
![](http://farm8.staticflickr.com/7304/9088043379_51b7e06316_b.jpg)
-GARRETT GT2554R Turbo (all AN water/oil fittings, modified aluminum piping welded on)
-very little to no shaft play
![](http://farm6.staticflickr.com/5459/9088041389_06c0372fd9_b.jpg)
![](http://farm4.staticflickr.com/3679/9088040259_d0b3eba47a_b.jpg)
![](http://farm8.staticflickr.com/7308/9090260698_d1e578dc1e_b.jpg)
AVO Downpipe (2 02 Bungs, 1 EGR bung)
![](http://farm4.staticflickr.com/3735/9088030827_371561b861_b.jpg)
modified intercooler w/ custom endtanks wrapped in reflective gold tape
(you can still retain factory AC setup, just need to lower radiator)
![](http://farm8.staticflickr.com/7454/9088036287_815586edbc_b.jpg)
custom 2.5" over the intercooler piping setup (super short, sparkly tribal yellow paint)
(Greddy BOV flange & IAT bung)
![](http://farm4.staticflickr.com/3737/9088034137_34ebbaae9f_b.jpg)
-Authentic Greddy Type RS BOV
![](http://farm6.staticflickr.com/5343/9088033135_b7ce636c98_b.jpg)
-custom 2.5" intake w/ massive K&N filter (super short piping)
![](http://farm4.staticflickr.com/3822/9090253004_1019fa3aee_b.jpg)
-PTFE coated SS oil drain & oil feed line (extra long) w/ AN fittings
![](http://farm6.staticflickr.com/5529/9090258544_698cc64cdd_b.jpg)
- -6AN pushlock hoses for collant (reflective gold heat wrapped)
![](http://farm6.staticflickr.com/5482/9088038475_849658d54d_b.jpg)
This setup only uses 4 couples. They are all extremely good quality, real 5ply w/ proper T-Bolt clamps (you'll never have to worry about boost leak)
![](http://farm4.staticflickr.com/3804/9088034937_ca496bb510_b.jpg)
-radiator shrowd
![](http://farm6.staticflickr.com/5477/9090246476_428fa789be_b.jpg)
__________________________________________________ _______________________
Level7Tune Steering Knuckles: $300 SHIPPED
-arguably the best steering knuckles on the market, made by FormulaD driver Chelsea DeNofa
-more steering angle than you will ever need
![](http://farm6.staticflickr.com/5517/9090245216_ace814d3df_b.jpg)
Front SCCA Red tow hook: $20 SHIPPED
![](http://farm8.staticflickr.com/7298/9088025839_f158c683c7_b.jpg)
Rear SCCA Red tow hook $20 SHIPPED
![](http://farm6.staticflickr.com/5522/9088026621_ec404c882d_b.jpg)
Turbonetics Boost Controller w/ mount. Price: $75 Shipped
![](http://farm8.staticflickr.com/7414/9088028913_bc2ee09d42_b.jpg)
Custom coolant catch can setup. Price: $335 SHIPPED
-includes valve cover with sparkly tribal yellow paint w/ -8AN bung
-AN fittings and PTFE coated -8 SS lines
-custom billet aluminum baffled oil catch can and mount w/ filter
![](http://farm4.staticflickr.com/3712/9090270990_3ef1c585b3_b.jpg)
![](http://farm6.staticflickr.com/5481/9090273264_7bdd0386ba_b.jpg)
Flyin' Miata duel feed fuel rail. Price: $225 SHIPPED
-comes w/ SS lines/fittings, plugs right into stock.
![](http://farm6.staticflickr.com/5350/9088047109_e6ef69b87f_b.jpg)
RC 440 CC SL9-440 Injectors w/ injector clips (not pictured). Price $150 Shipped
-these were flow tested/cleaned before I got them (about a year ago 10-15k miles)
![](http://farm8.staticflickr.com/7291/9088044795_fbb1fd3da3_b.jpg)
__________________________________________________ _______________________
CUSTOM TURBO SETUP. PRICE $3,575 SHIPPED
-it took me forever to set this up properly, this is one of the most reliable, quick spooling turbo kits I have experienced. There is absolutely NO lag, instant power, boost basically starts when you touch the throttle. Only uses 4 clamps, intake/intercooler piping is super short for response.
Acceleration video (8-9psi) 0-60
-AVO MANIFOLD (super fast spool design, coated w/ 2000 degree jet coating, relief cut)
![](http://farm8.staticflickr.com/7334/9088042415_c173a1c510_b.jpg)
![](http://farm8.staticflickr.com/7304/9088043379_51b7e06316_b.jpg)
-GARRETT GT2554R Turbo (all AN water/oil fittings, modified aluminum piping welded on)
-very little to no shaft play
![](http://farm6.staticflickr.com/5459/9088041389_06c0372fd9_b.jpg)
![](http://farm4.staticflickr.com/3679/9088040259_d0b3eba47a_b.jpg)
![](http://farm8.staticflickr.com/7308/9090260698_d1e578dc1e_b.jpg)
AVO Downpipe (2 02 Bungs, 1 EGR bung)
![](http://farm4.staticflickr.com/3735/9088030827_371561b861_b.jpg)
modified intercooler w/ custom endtanks wrapped in reflective gold tape
(you can still retain factory AC setup, just need to lower radiator)
![](http://farm8.staticflickr.com/7454/9088036287_815586edbc_b.jpg)
custom 2.5" over the intercooler piping setup (super short, sparkly tribal yellow paint)
(Greddy BOV flange & IAT bung)
![](http://farm4.staticflickr.com/3737/9088034137_34ebbaae9f_b.jpg)
-Authentic Greddy Type RS BOV
![](http://farm6.staticflickr.com/5343/9088033135_b7ce636c98_b.jpg)
-custom 2.5" intake w/ massive K&N filter (super short piping)
![](http://farm4.staticflickr.com/3822/9090253004_1019fa3aee_b.jpg)
-PTFE coated SS oil drain & oil feed line (extra long) w/ AN fittings
![](http://farm6.staticflickr.com/5529/9090258544_698cc64cdd_b.jpg)
- -6AN pushlock hoses for collant (reflective gold heat wrapped)
![](http://farm6.staticflickr.com/5482/9088038475_849658d54d_b.jpg)
This setup only uses 4 couples. They are all extremely good quality, real 5ply w/ proper T-Bolt clamps (you'll never have to worry about boost leak)
![](http://farm4.staticflickr.com/3804/9088034937_ca496bb510_b.jpg)
-radiator shrowd
![](http://farm6.staticflickr.com/5477/9090246476_428fa789be_b.jpg)
__________________________________________________ _______________________
Level7Tune Steering Knuckles: $300 SHIPPED
-arguably the best steering knuckles on the market, made by FormulaD driver Chelsea DeNofa
-more steering angle than you will ever need
![](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/63436_10200565646442506_1564054205_n.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
Andifer
Miata parts for sale/trade
8
09-23-2015 05:43 PM