FS: Team Dynamic Racing Pro-Race 1.2 Wheels w/ Hoosier R3S05 Tires AND MY OTHER PARTS
#1
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
FS: Team Dynamic Racing Pro-Race 1.2 Wheels w/ Hoosier R3S05 Tires AND MY OTHER PARTS
Lets start off with the specs: These are 14x7 +38 (~12lb ea)Team Dynamic Racing Pro-Race 1.2 wheels with 225/50ZR14 Hoosier R3S05 tires mounted on them. These wheels are the revised version of the original pro race wheel which moves the face of the wheel inward to reduce the chances of curb rash and other damage. The tires are used and from looking at them, probably only have a few sessions left on them. The wheels are in good condition, with no curb rash and only a few noticable blemishes. These came with my car when I bought it a few months back. I thought that I would use them, but they seem to just be collecting dust. With my efforts shifting to getting some 6UL's and my Mazdaspeed3 winter beater, I need to clear out things that are not absolutly must haves right now, although I don't HAVE to sell em.....Anyways, I would prefer local pick up in CT and I could probably arrange to meet you within a reasonable distance. If shipping is a must, I could probably get it done, but obviously your paying for the freight (I can supply packing materials).
I know someone out there can put these to better use than I, SPEAK UP!!
NEW PRICE 6/28/09
**$400, WHEELS+TIRES**
fsshots.jpg?t=1245368769
My car's PO rippin it up:
hg-1.jpg?t=1245369103
DSC04165-1.jpg?t=1245372681
DSC04166.jpg?t=1245372733
DSC04167.jpg?t=1245372759
I know someone out there can put these to better use than I, SPEAK UP!!
NEW PRICE 6/28/09
**$400, WHEELS+TIRES**
fsshots.jpg?t=1245368769
My car's PO rippin it up:
hg-1.jpg?t=1245369103
DSC04165-1.jpg?t=1245372681
DSC04166.jpg?t=1245372733
DSC04167.jpg?t=1245372759
Last edited by Cspence; 06-28-2009 at 09:53 AM.
#4
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Well originally I was going to hold onto a lot of my spare parts and sell a few here and there to people who pm'd me, but I am quickly running out of space in my tiny *** garage and I am getting very anxious about getting into a new car after I pay off some outstanding debt....this being said, figured you guys might help my cause by picking up some of my extra parts....FIRST COME FIRST SERVE, this is all I got!!
**Shipping to continental US included in all prices**
My paypal is SpenceChristopher@yahoo.com
Gauge pods $30 Shipped ea
I have **(1)** 6 Gauge (2) 5 gauge **(1)** 3 Center gauge
I have one radio holder $25 Shipped
DSC03244.jpg?t=1238626472
0328091229.jpg?
I have my first test bumper scoop which has been trimmed a little for mock up reasons. Its not perfect, but its still could be salvaged. Levnubin got the better of the two mock sets….$50 Shipped
Actual pictures of the pieces:
DSC04157.jpg?t=1245358944
DSC04158.jpg?t=1245359045
DSC04160.jpg?t=1245359087
My setup:
5-3.jpg?t=1244150630
10-2.jpg?t=1244150508
I have **(2)** radiator covers, (1) solid, scuffed and cleared and (1) with the Miata Turbo Logo punched in (The logo will need some dremel or file work around the letters to get rid of all the burs. These were not made on a water jet or with a laser so there are some burrs). $50 Shipped ea.
ACTUAL PIECES:
DSC04205.jpg?t=1245449955
Extra pics:
DSC04173.jpg?t=1245449875
DSC03300.jpg?t=1238805663
DSC03349.jpg?t=1240448913
DSC04181.jpg?t=1245449902
I have (1) Headlight scoop. Back piece will need to be bent to fit - contoured like I did / welded.
$50 for both pieces shipped
4-4.jpg?t=1244238208
Headlight projector brackets (2). Will need fab work on your end to make them work, even I had to fudge em a little after I punched out the brackets. Also, to make things easier, you should but RX330 projector housing from ebay as these were designed for them. $20 Shipped pr.
DSC03426.jpg?t=1241837967
Headlight Shrouds (2). $20 Shipped pr.
DSC03428.jpg?t=1241838019
I have (3) MIATATURBO License Plates(Will need dremel or file work to clean up burrs left around the letters. These were not made on a waterjet or laser so there are some rough edges. You just have to put some elbow grease into it). $35 Shipped ea.
DSC03507.jpg?t=1242495973
DSC03525.jpg?t=1242496488
**Shipping to continental US included in all prices**
My paypal is SpenceChristopher@yahoo.com
Gauge pods $30 Shipped ea
I have **(1)** 6 Gauge (2) 5 gauge **(1)** 3 Center gauge
I have one radio holder $25 Shipped
DSC03244.jpg?t=1238626472
0328091229.jpg?
I have my first test bumper scoop which has been trimmed a little for mock up reasons. Its not perfect, but its still could be salvaged. Levnubin got the better of the two mock sets….$50 Shipped
Actual pictures of the pieces:
DSC04157.jpg?t=1245358944
DSC04158.jpg?t=1245359045
DSC04160.jpg?t=1245359087
My setup:
5-3.jpg?t=1244150630
10-2.jpg?t=1244150508
I have **(2)** radiator covers, (1) solid, scuffed and cleared and (1) with the Miata Turbo Logo punched in (The logo will need some dremel or file work around the letters to get rid of all the burs. These were not made on a water jet or with a laser so there are some burrs). $50 Shipped ea.
ACTUAL PIECES:
DSC04205.jpg?t=1245449955
Extra pics:
DSC04173.jpg?t=1245449875
DSC03300.jpg?t=1238805663
DSC03349.jpg?t=1240448913
DSC04181.jpg?t=1245449902
I have (1) Headlight scoop. Back piece will need to be bent to fit - contoured like I did / welded.
$50 for both pieces shipped
4-4.jpg?t=1244238208
Headlight projector brackets (2). Will need fab work on your end to make them work, even I had to fudge em a little after I punched out the brackets. Also, to make things easier, you should but RX330 projector housing from ebay as these were designed for them. $20 Shipped pr.
DSC03426.jpg?t=1241837967
Headlight Shrouds (2). $20 Shipped pr.
DSC03428.jpg?t=1241838019
I have (3) MIATATURBO License Plates(Will need dremel or file work to clean up burrs left around the letters. These were not made on a waterjet or laser so there are some rough edges. You just have to put some elbow grease into it). $35 Shipped ea.
DSC03507.jpg?t=1242495973
DSC03525.jpg?t=1242496488
Last edited by Cspence; 07-01-2009 at 10:14 PM.
#5
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
If someone is interested in just the rims, I can ship them.
NEW PRICE 6/28/09
$375+ actual shipping (I have the packing materials already and I'll eat the cost of having the tires removed)
If you want to check what shipping charges would be, my zip is 06450 / Each carton is 20" x 15" x 8" and will weight approx 15#'s when all packed
I checked last night on USPS and UPS and it seemed like the most shipping would be was $20 each if you were on the complete opposite side of the country....CT to CA. If you live closer, expect the shipping to be less around the 10-15$ mark....all pricing for ground service of coarse...
NEW PRICE 6/28/09
$375+ actual shipping (I have the packing materials already and I'll eat the cost of having the tires removed)
If you want to check what shipping charges would be, my zip is 06450 / Each carton is 20" x 15" x 8" and will weight approx 15#'s when all packed
I checked last night on USPS and UPS and it seemed like the most shipping would be was $20 each if you were on the complete opposite side of the country....CT to CA. If you live closer, expect the shipping to be less around the 10-15$ mark....all pricing for ground service of coarse...
Last edited by Cspence; 06-28-2009 at 09:56 AM.
#11
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Origin zip: 06450 (Meriden, CT)
Weight: 30#'s
Ship size: 22" x 22" x 9"
Customs Value: $100 (since each is individually packaged)
#13
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Couple items have sold so I've updated my post above with what remains....I'll be out of town until 7/5, so if anyone wants something, pm me and maybe claim it by posting a reply in this thread so others can know what is still available. Take it easy guys, have a good 4th!!
O yea, if anyone needs some 52mm gauge blanks, I have (2) brand new extras I could let go for like $15 shipped. Same as the ones I'm using in this pic...(They are NEW, I bought 4 thinking I was going to use my 5 gauge panel initially, but ended up going with the 3 gauge, therefore only needing 2 blanks for the time being)
DSC03353.jpg?t=1240523158
O yea, if anyone needs some 52mm gauge blanks, I have (2) brand new extras I could let go for like $15 shipped. Same as the ones I'm using in this pic...(They are NEW, I bought 4 thinking I was going to use my 5 gauge panel initially, but ended up going with the 3 gauge, therefore only needing 2 blanks for the time being)
DSC03353.jpg?t=1240523158
#17
I'm definitely interested in one of the gauge holders...would prefer a 3-gauge with radio, but will take almost anything.
May also take a look at the projector mounts and shrouding if the measurements will work for the Infiniti M45 housings I just picked up for a steal on CL.
EDIT: If you weren't in CT I'd already have the wheel/tire combo for upcoming track day.
May also take a look at the projector mounts and shrouding if the measurements will work for the Infiniti M45 housings I just picked up for a steal on CL.
EDIT: If you weren't in CT I'd already have the wheel/tire combo for upcoming track day.
#18
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
I'm definitely interested in one of the gauge holders...would prefer a 3-gauge with radio, but will take almost anything.
May also take a look at the projector mounts and shrouding if the measurements will work for the Infiniti M45 housings I just picked up for a steal on CL.
EDIT: If you weren't in CT I'd already have the wheel/tire combo for upcoming track day.
May also take a look at the projector mounts and shrouding if the measurements will work for the Infiniti M45 housings I just picked up for a steal on CL.
EDIT: If you weren't in CT I'd already have the wheel/tire combo for upcoming track day.
Last edited by Cspence; 09-06-2009 at 03:56 PM.