FS: SoCal: na8 motor, nb torsens, etc.
#1
![Exclamation](https://www.miataturbo.net/images/icons/icon4.gif)
We are currently tearing down Tony's miata, so we have parts up for sale. We are NOT PARTING OUT the car, we are rebuilding it, next phase!
---------------------------------------
94-95 Turbo "Kit"
NA8 Intercooler setup:
2.5" piping on both cold side and hot side
Cold side has pipe for IAC
Cold side has bung for IAT
Comes with all silicons and t-bolt clamps
Designed for HKS manifold with t25/28
^no AC/PS
Blitz Blow Off Valve
-New Venturi Drive
Intercooler
^Core 21.5" x 9.5"
^^Overall 28" x 9.5"
Turbo 3" downpipe
-custom 2piece
--v-band setup
-no divorce
Turbo 3" exhaust setup
-fully custom
--two resonators
---quiet large muffler
--electronic exhaust cutout
Only parts needed to complete the turbo setup of how it was originally on tony's car are:
--t25/t28 turbo
--HKS manifold
Original cost of parts:
Aluminum Intercooler Pipes: $350
Intercooler: $100
BOV: $200
Downpipe: $300
Exhaust piping: $150
Resonators: $150
Muffler: $60
Electronic Cutout: $150
Total: $1460
Price: $700
----------------------------------------
5spd transmission
Still bolted to engine
Will pull when bought
$200
----------------------------------------
6spd transmission
-was going into the car after rebuild
--change of plans
---unsure of condition, but should be good
--Came off JDM 99-00
$700
----------------------------------------
Torsen rear-end Type 2
-2002 SE
--4.3 gear
---Complete with axles and driveshaft
--off the drift-car, heavily used
$600
----------------------------------------
Torsen Type 2
-Came off same 99-00 as the 6-speed
-complete with axles and driveshaft
-was our backup set (can be used to swap for another miata)
$650
----------------------------------------
na8 motor
-off Tony's car
--Ran GREAT
---Never any problems
--Timing belt/water pump 8k
-140k, 50k boosted
--ACT Clutch and Flywheel
---6 puck sprung Heavy Duty
---Prolite 10.4lb
---^8k with 2 drift events
--NGK Power Cable set
-oil pan tapped for turbo
$600
----------------------------------------
MSPNP for 94-95 NA8
-off Tony's car
$550
550CC Red-top Injectors
$150
Both: $600
----------------------------------------
OEM Hood with pins
-Rustoleum paint
$75
----------------------------------------
OEM Fenders
-rolled and pulled
--to fit 16x8 et0 w/ 205-40-16
-Rustoleum paint
--includes fender markers
$150 for both
----------------------------------------
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/42923-fs-socal-na8-motor-nb-torsens-etc-7071545873_abcf5a2f80_z.jpg?dateline=1336437509)
9998 by terry pham, on Flickr
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/42924-fs-socal-na8-motor-nb-torsens-etc-7005135732_f6f9638569_z.jpg?dateline=1336437509)
_A225782 by terry pham, on Flickr
----------------------------------------
Pictures of all parts at:
http://www.flickr.com/photos/terrypham/
----------------------------------------
If you want more than one part, we can make a deal.
.
---------------------------------------
94-95 Turbo "Kit"
NA8 Intercooler setup:
2.5" piping on both cold side and hot side
Cold side has pipe for IAC
Cold side has bung for IAT
Comes with all silicons and t-bolt clamps
Designed for HKS manifold with t25/28
^no AC/PS
Blitz Blow Off Valve
-New Venturi Drive
Intercooler
^Core 21.5" x 9.5"
^^Overall 28" x 9.5"
Turbo 3" downpipe
-custom 2piece
--v-band setup
-no divorce
Turbo 3" exhaust setup
-fully custom
--two resonators
---quiet large muffler
--electronic exhaust cutout
Only parts needed to complete the turbo setup of how it was originally on tony's car are:
--t25/t28 turbo
--HKS manifold
Original cost of parts:
Aluminum Intercooler Pipes: $350
Intercooler: $100
BOV: $200
Downpipe: $300
Exhaust piping: $150
Resonators: $150
Muffler: $60
Electronic Cutout: $150
Total: $1460
Price: $700
----------------------------------------
5spd transmission
Still bolted to engine
Will pull when bought
$200
----------------------------------------
6spd transmission
-was going into the car after rebuild
--change of plans
---unsure of condition, but should be good
--Came off JDM 99-00
$700
----------------------------------------
Torsen rear-end Type 2
-2002 SE
--4.3 gear
---Complete with axles and driveshaft
--off the drift-car, heavily used
$600
----------------------------------------
Torsen Type 2
-Came off same 99-00 as the 6-speed
-complete with axles and driveshaft
-was our backup set (can be used to swap for another miata)
$650
----------------------------------------
na8 motor
-off Tony's car
--Ran GREAT
---Never any problems
--Timing belt/water pump 8k
-140k, 50k boosted
--ACT Clutch and Flywheel
---6 puck sprung Heavy Duty
---Prolite 10.4lb
---^8k with 2 drift events
--NGK Power Cable set
-oil pan tapped for turbo
$600
----------------------------------------
MSPNP for 94-95 NA8
-off Tony's car
$550
550CC Red-top Injectors
$150
Both: $600
----------------------------------------
OEM Hood with pins
-Rustoleum paint
$75
----------------------------------------
OEM Fenders
-rolled and pulled
--to fit 16x8 et0 w/ 205-40-16
-Rustoleum paint
--includes fender markers
$150 for both
----------------------------------------
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/42923-fs-socal-na8-motor-nb-torsens-etc-7071545873_abcf5a2f80_z.jpg?dateline=1336437509)
9998 by terry pham, on Flickr
![](https://www.miataturbo.net/attachments/miata-parts-sale-trade-5/42924-fs-socal-na8-motor-nb-torsens-etc-7005135732_f6f9638569_z.jpg?dateline=1336437509)
_A225782 by terry pham, on Flickr
----------------------------------------
Pictures of all parts at:
http://www.flickr.com/photos/terrypham/
----------------------------------------
If you want more than one part, we can make a deal.
.
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Tried PMing, can't due to posts, if you could email me at khyber6o3 at gmail.com that would be great, I'm interested in a few of your parts, and very local! Just drove out to work near Agoura from Northridge this morning! :P. Shoot me an email and I can give you my number to make things easier if that works. Thanks
-Max
-Max
Thread
Thread Starter
Forum
Replies
Last Post