This is a compilation posting of all of the universal parts that I currently have for sale as taken from listings that I have on a local forum. If you have any questions feel free to ask. My email is thagr81_us (at) hotmail (dot) com. Thanks in advance for taking the time to view this posting!

I have for sale an INCON GTBB37 Turbocharger. Yes, this is one of the ones that Andreas Miko modified quite some time ago. It is currently setup for external wastegate use as you can tell in the fourth photo in this ad. This turbocharger was bought second hand from a friend of mine and has been sitting since purchase. The turbo has the same specs as a Garrett GT3076R only the turbine side has been ported to allow more air to flow through it. This turbocharger has never been used by me or the previous owner. It was bought brand new from Andreas Miko. I'm not sure what Andreas charged for them brand new back in the day when you COULD get them. I'm asking $800 FIRM + shipping for it. The rust on the turbine housing is from mounting the turbocharger up to my SR20DET and leaving it for a week outside in a covered shed. The housing has been beadblasted by myself to remove this surface rust. The turbocharger is located in Simpsonville, SC which is near Greenville. If you need to reach me on this immediately send me an e-mail to thagr81_us at hotmail dot com or you can PM/reply to this thread, but you will most likely receive a delayed response, as I don't have a computer at my apartment. Photos of the turbocharger can be seen below (click thumbnails to enlarge). Thanks for taking the time to view my ad and if you have any questions, don't hesitate to ask.










Tial 38mm Wastegate is SOLD!!!

HKS SSQV is SOLD!!!

I have for sale ONE authentic Takata Short Racing Harness (MPH-341W) for use in a 2-seater or with harness bar/rollcage. This harness expired in 2008. The harness includes (2) Takata Short Eye Bolts and (2) Harness Adjuster Bars to properly install the harness with a roll cage or harness bar. If you do not have a cage/harness bar you will need to purchase two additional Eye Bolts to mount this properly into your two seater. If you have any questions feel free to ask. The best way to reach me is by email at: thagr81_us (at) hotmail (dot) com as I will receive your reply instantly on my phone. I am looking to get $300 OBO + shipping.

Pics (click to enlarge):




I have for sale a Defi D-Gauge Fuel Pressure Gauge in Imperial Units (PSI) with a white face. These are 52 mm in size. This gauge was never even installed into my car for test fitting and was only taken out of the box to check on all of the supplied equipment and test how everything fit together. My loss is definitely your gain on this one... I am looking to get $100 + shipping for this. Thanks in advance for viewing this posting and let me know if you need any additional information or photos.

Oil Pressure Gauge SOLD!

Pics (click to enlarge):





Also forgot to add that I have a '94 Longblock for sale for $400. Good compression across the board as reported by Panic Motorsports where I bought it awhile back. Also, I have a '99 head for $450+shipping. If the buyer of the head is interested I also have a set of ARP Head Studs for $100.

 

ill give you 100+shipping for the harness.
takata harness's hold spec for 4yrs
yours expired in 2008 meaning it was bought in 2004. which is now 6years ago

they're only 400 new, and you can find 375 if you look around.

 

Holy lowball Batman! Thanks for the offer however... But that is a little low.

 

The Defi Oil Pressure gauge is pending...

All other items are still up for sale.

 

Defi Oil Pressure gauge is SOLD!!!

Tial 38mm Wastegate is pending...

 

Just so you know how this turbo would perform on a stock 1.8L with factory 7000RPM redline, here is a compressor plot of this in the first image. In the second, you can see what 1 mm overbore pistons and an 8500RPM redline can do.

1.8L w/ 7000RPM redline


1.9L w/ 8500RPM redline

 

Pics of headstuds...

 

The HKS SSQV, Defi Oil Pressure Gauge, and Tial Wastegate are SOLD!!!

 

thanks for the co-operation.

 

No, thank you! Should be out to you around 5:30PM...

 

Bump for remaining items...

 

The thumbs up is kinda weak....

there should be more visible clenching and the thumb should be more erect with a rearward arch indictating a strong boo-ya not a boo hoo yawn..

 

Haha! Thanks for the input... Unfortunately, I was in an accident where my thumb cannot arch back. Thanks for the bump though...